Similar to commit
a6c30873ee4a ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").
GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.
Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.
The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.
clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]
Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.
Add a few more instances found in compile testing as found by Arnd and
Nathan.
Link: https://github.com/llvm/llvm-project/commit/1d51c699b9e2ebc5bcfdbe85c74cc871426333d4
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
$(obj)/piggy.o: $(obj)/piggy_data
CFLAGS_font.o := -Dstatic=
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
obj-$(CONFIG_CPU_V7) += secure_cntvoff.o
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg
-AFLAGS_mcpm_head.o := -march=armv7-a
-AFLAGS_vlock.o := -march=armv7-a
obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o
obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
#include "vlock.h"
+.arch armv7-a
+
.if MCPM_SYNC_CLUSTER_CPUS
.error "cpus must be the first member of struct mcpm_sync_struct"
.endif
#include <linux/linkage.h>
#include "vlock.h"
+.arch armv7-a
+
/* Select different code if voting flags can fit in a single word. */
#if VLOCK_VOTING_SIZE > 4
#define FEW(x...)
obj-$(CONFIG_OF) += devtree.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o
-CFLAGS_swp_emulate.o := -Wa,-march=armv7-a
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o
obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o
-AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a
ifeq ($(CONFIG_ARM_PSCI),y)
obj-$(CONFIG_SMP) += psci_smp.o
endif
#include <asm/assembler.h>
#include <asm/virt.h>
+.arch armv7-a
+
#ifndef ZIMAGE
/*
* For the kernel proper, we need to find out the CPU boot mode long after
*/
#define __user_swpX_asm(data, addr, res, temp, B) \
__asm__ __volatile__( \
+ ".arch armv7-a\n" \
"0: ldrex"B" %2, [%3]\n" \
"1: strex"B" %0, %1, [%3]\n" \
" cmp %0, #0\n" \
lib-y += io-readsw-armv4.o io-writesw-armv4.o
endif
-ifeq ($(CONFIG_ARCH_RPC),y)
- AFLAGS_delay-loop.o += -march=armv4
-endif
-
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
#include <asm/assembler.h>
#include <asm/delay.h>
+#ifdef CONFIG_ARCH_RPC
+ .arch armv4
+#endif
+
.text
.LC0: .word loops_per_jiffy
# Power Management
obj-$(CONFIG_ATMEL_PM) += pm.o pm_suspend.o
-ifeq ($(CONFIG_CPU_V7),y)
-AFLAGS_pm_suspend.o := -march=armv7-a
-endif
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
#include "pm.h"
#include "pm_data-offsets.h"
+#ifdef CONFIG_CPU_V7
+.arch armv7-a
+#endif
+
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),)
-AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
endif
obj-$(CONFIG_SOC_IMX7ULP) += mach-imx7ulp.o pm-imx7ulp.o
ifeq ($(CONFIG_SUSPEND),y)
-AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
-AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
#include <linux/init.h>
#include <asm/assembler.h>
+.arch armv7-a
+
diag_reg_offset:
.word g_diag_reg - .
#include <asm/hardware/cache-l2x0.h>
#include "hardware.h"
+.arch armv7-a
+
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
#include <asm/hardware/cache-l2x0.h>
#include "hardware.h"
+.arch armv7-a
+
/*
* ==================== low level suspend ====================
*
# SPDX-License-Identifier: GPL-2.0
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
-AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
-CFLAGS_pmsu.o := -march=armv7-a
-
obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
#include <asm/assembler.h>
#include <asm/cp15.h>
+ .arch armv7-a
.text
/*
* Returns the coherency base address in r1 (r0 is untouched), or 0 if
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
+ ".arch armv7-a\n\t"
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, %0 \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
# SPDX-License-Identifier: GPL-2.0-only
-AFLAGS_headsmp.o += -march=armv7-a
-
obj-$(CONFIG_ARCH_WPCM450) += wpcm450.o
obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
#include <linux/init.h>
#include <asm/assembler.h>
+.arch armv7-a
+
/*
* The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
* here.
# SPDX-License-Identifier: GPL-2.0
-asflags-y += -march=armv7-a
-
obj-y += io.o
obj-y += irq.o
obj-y += pm.o
#define PMC_SCRATCH41 0x140
+.arch armv7-a
+
#ifdef CONFIG_PM_SLEEP
/*
* tegra_resume
#define PLLM_STORE_MASK (1 << 1)
#define PLLP_STORE_MASK (1 << 2)
+.arch armv7-a
+
.macro test_pll_state, rd, test_mask
ldr \rd, tegra_pll_state
tst \rd, #\test_mask
#define PLLX_STORE_MASK (1 << 4)
#define PLLM_PMC_STORE_MASK (1 << 5)
+.arch armv7-a
+
.macro emc_device_mask, rd, base
ldr \rd, [\base, #EMC_ADR_CFG]
tst \rd, #0x1
#define CLK_RESET_CCLK_BURST 0x20
#define CLK_RESET_CCLK_DIVIDER 0x24
+.arch armv7-a
+
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
-AFLAGS_abort-ev6.o :=-Wa,-march=armv6k
-AFLAGS_abort-ev7.o :=-Wa,-march=armv7-a
-
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o
obj-$(CONFIG_CPU_CACHE_V7M) += cache-v7m.o
-AFLAGS_cache-v6.o :=-Wa,-march=armv6
-AFLAGS_cache-v7.o :=-Wa,-march=armv7-a
-AFLAGS_cache-v7m.o :=-Wa,-march=armv7-m
-
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
obj-$(CONFIG_CPU_COPY_FEROCEON) += copypage-feroceon.o
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
-CFLAGS_copypage-feroceon.o := -march=armv5te
-
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
-AFLAGS_tlb-v6.o :=-Wa,-march=armv6
-AFLAGS_tlb-v7.o :=-Wa,-march=armv7-a
-
obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o
obj-$(CONFIG_CPU_V7) += proc-v7.o proc-v7-bugs.o
obj-$(CONFIG_CPU_V7M) += proc-v7m.o
-AFLAGS_proc-v6.o :=-Wa,-march=armv6
-AFLAGS_proc-v7.o :=-Wa,-march=armv7-a
-
obj-$(CONFIG_OUTER_CACHE) += l2c-common.o
obj-$(CONFIG_CACHE_B15_RAC) += cache-b15-rac.o
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
* abort here if the I-TLB and D-TLB aren't seeing the same
* picture. Unfortunately, this does happen. We live with it.
*/
+ .arch armv6k
.align 5
ENTRY(v6_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
*
* Purpose : obtain information about current aborted instruction.
*/
+ .arch armv7-a
.align 5
ENTRY(v7_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+.arch armv6
+
/*
* v6_flush_icache_all()
*
#include "proc-macros.S"
+.arch armv7-a
+
#ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
.globl icache_size
.data
#include "proc-macros.S"
+.arch armv7-m
+
/* Generic V7M read/write macros for memory mapped cache operations */
.macro v7m_cache_read, rt, reg
movw \rt, #:lower16:BASEADDR_V7M_SCB + \reg
int tmp;
asm volatile ("\
+.arch armv5te \n\
1: ldmia %1!, {r2 - r7, ip, lr} \n\
pld [%1, #0] \n\
pld [%1, #32] \n\
#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S
#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+.arch armv6
+
ENTRY(cpu_v6_proc_init)
ret lr
#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+.arch armv7-a
+
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
*
#include "proc-v7-2level.S"
#endif
+.arch armv7-a
+
ENTRY(cpu_v7_proc_init)
ret lr
ENDPROC(cpu_v7_proc_init)
#define HARVARD_TLB
+.arch armv6
+
/*
* v6wbi_flush_user_tlb_range(start, end, vma)
*
#include <asm/tlbflush.h>
#include "proc-macros.S"
+.arch armv7-a
+
/*
* v7wbi_flush_user_tlb_range(start, end, vma)
*
ti-emif-sram-objs := ti-emif-pm.o ti-emif-sram-pm.o
-AFLAGS_ti-emif-sram-pm.o :=-Wa,-march=armv7-a
-
$(obj)/ti-emif-sram-pm.o: $(obj)/ti-emif-asm-offsets.h
$(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.s FORCE
.arm
.align 3
+ .arch armv7-a
ENTRY(ti_emif_sram)
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_ARM) += s2-arm.o pm-arm.o
-AFLAGS_s2-arm.o := -march=armv7-a
obj-$(CONFIG_BMIPS_GENERIC) += s2-mips.o s3-mips.o pm-mips.o
#include "pm.h"
+ .arch armv7-a
.text
.align 3
projects / platform / kernel / linux-starfive.git / commitdiff