machine-$(CONFIG_ARCH_OMAP2) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
+ plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/irq.h>
#if 0
#include <asm/debug-ll.h>
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
int s3c2410_clkcon_enable(struct clk *clk, int enable)
{
#include <asm/dma.h>
#include <mach/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
/* include the reset of the code which will do the work */
-#include <asm/plat-s3c/debug-macro.S>
+#include <plat/debug-macro.S>
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static int s3c2410_irq_add(struct sys_device *sysdev)
{
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <linux/serial_8250.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/udc.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
#include <asm/mach/map.h>
#include <asm/plat-s3c/iic.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/udc.h>
static struct map_desc n30_iodesc[] __initdata = {
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c24xx/udc.h>
#include <mach/spi-gpio.h>
#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
#include <mach/regs-gpio.h>
#include <mach/h1940.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#ifdef CONFIG_S3C2410_PM_DEBUG
extern void pm_dbg(const char *fmt, ...);
#include <asm/irq.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
/* Initial IO mappings */
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
/* s3c2410_cpu_suspend
*
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/devs.h>
#include "usb-simtec.h"
/* control power and monitor over-current events on various Simtec
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-gpio.h>
#include <mach/regs-power.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/irq.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/irq.h>
+#include <plat/pm.h>
#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c/iic.h>
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#include <asm/plat-s3c24xx/udc.h>
static struct map_desc jive_iodesc[] __initdata = {
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <asm/plat-s3c24xx/udc.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc vstms_iodesc[] __initdata = {
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <mach/idle.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-s3c2412.h>
#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* S3C2440 extended clock support */
#include <mach/dma.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/cpu.h>
+#include <plat/s3c2440.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* WDT/AC97 */
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <net/ax88796.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
/* onboard perihperal map */
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/fb.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2440.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* S3C2442 extended clock support */
#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2442.h>
+#include <plat/cpu.h>
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
#include <mach/regs-s3c2443-clock.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2443.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2443.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
--- /dev/null
+# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+
+obj-n := dummy.o
* published by the Free Software Foundation.
*/
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
/* The S3C2440 implementations are used by default as they are the
* most widely re-used */
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* clock information */
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
/* LED devices */
#include <mach/system-reset.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/s3c2400.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2400.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include "s3c244x.h"
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2440.h>
+#include <plat/s3c2442.h>
+#include <plat/s3c2443.h>
struct cpu_table {
unsigned long idcode;
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c24xx/udc.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/regs-spi.h>
/* Serial port registrations */
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* wakeup irq control */
#include <asm/mach-types.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <asm/mach/time.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
/* for external use */
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
/* Each of the timers 0 through 5 go through the following
* clock tree, with the inputs depending on the timers.
#include <linux/io.h>
#include <linux/pwm.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
struct pwm_device {
struct list_head list;
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
{
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* camera irq */
#include <asm/irq.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include "s3c244x.h"
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
#include <asm/io.h>
#include <asm/irq.h>
#include <mach/map.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
#include <mach/regs-irq.h>
#include <asm/mach/time.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
static unsigned long timer_startval;
static unsigned long timer_usec_ticks;
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
/* defines for UART registers */
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c/regs-watchdog.h>
/* working in physical space... */