add packaging

diff --git a/packaging/baselibs.conf b/packaging/baselibs.conf
new file mode 100644 (file)
index 0000000..ec97a81
--- /dev/null
+++ b/packaging/baselibs.conf
@@ -0,0 +1,4 @@
+libbluetooth
+bluez-devel
+       requires -bluez-<targettype>
+       requires "libbluetooth-<targettype> = <version>"

diff --git a/packaging/bluetooth.modprobe b/packaging/bluetooth.modprobe
new file mode 100644 (file)
index 0000000..3072d78
--- /dev/null
+++ b/packaging/bluetooth.modprobe
@@ -0,0 +1,3 @@
+# use "reset=1" as default, since it should be safe for recent devices and
+# solves all kind of problems.
+options btusb reset=1

diff --git a/packaging/bluetooth.sh b/packaging/bluetooth.sh
new file mode 100644 (file)
index 0000000..8cec636
--- /dev/null
+++ b/packaging/bluetooth.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+BLUETOOTH_CONFIG=/etc/sysconfig/bluetooth
+test -r $BLUETOOTH_CONFIG && . $BLUETOOTH_CONFIG
+
+if [ "$START_BLUETOOTHD" = "no" ]; then
+       exit 0
+fi
+
+exec /usr/sbin/bluetoothd --udev

diff --git a/packaging/bluetooth.sysconfig b/packaging/bluetooth.sysconfig
new file mode 100644 (file)
index 0000000..d2bfec6
--- /dev/null
+++ b/packaging/bluetooth.sysconfig
@@ -0,0 +1,7 @@
+############ general 
+## Path:        Hardware/Bluetooth
+## Description: General settings for the Bluetooth device, if set to 'yes' bluetooth is started when udev reports 'added bluetooth device'
+## Type:        yesno
+## Default:     yes
+
+START_BLUETOOTHD=yes

diff --git a/packaging/bluez-coldplug.init b/packaging/bluez-coldplug.init
new file mode 100644 (file)
index 0000000..bf370b8
--- /dev/null
+++ b/packaging/bluez-coldplug.init
@@ -0,0 +1,42 @@
+#! /bin/sh
+#
+# /etc/init.d/bluez-coldplug
+#
+# Copyright (c) 2009, SUSE Linux Products GmbH Nuernberg, Germany.  All rights reserved.
+#
+#
+### BEGIN INIT INFO
+# Provides:            bluez-coldplug
+# Required-Start:      dbus $remote_fs
+# Should-Start:                $network $syslog
+# Required-Stop:       $null
+# Should-Stop:         $null
+# Default-Start:       2 3 5
+# Default-Stop:
+# Short-Description:
+# Description: handles udev coldplug of bluetooth dongles
+### END INIT INFO
+
+. /etc/rc.status
+
+case "$1" in
+       start|restart|try-restart)
+               udevadm trigger --subsystem-match=bluetooth --action=add
+               rc_status -v
+               ;;
+       stop)   
+               rc_status -v
+               ;;
+       force-reload|reload)
+               rc_status -v
+               ;;
+       status)
+               rc_status -v
+               ;;
+       *)
+               echo "Usage: $0" \
+                    "{start|stop|status|try-restart|restart|force-reload|reload}"
+               exit 1
+               ;;
+esac
+rc_exit

diff --git a/packaging/bluez.spec b/packaging/bluez.spec
new file mode 100644 (file)
index 0000000..f4b0ff3
--- /dev/null
+++ b/packaging/bluez.spec
@@ -0,0 +1,288 @@
+%define with_libcapng --enable-capng
+
+Name:           bluez
+BuildRequires:  pkgconfig(dbus-1)
+BuildRequires:  flex
+BuildRequires:  libcap-ng-devel
+BuildRequires:  systemd
+%{?systemd_requires}
+BuildRequires:  pkgconfig(alsa)
+BuildRequires:  automake
+BuildRequires:  check-devel
+BuildRequires:  glib2-devel >= 2.16
+BuildRequires:  libsndfile-devel
+BuildRequires:  libtool
+BuildRequires:  libudev-devel
+BuildRequires:  libusb-devel
+BuildRequires:  pkg-config
+BuildRequires:  readline-devel
+BuildRequires:  udev
+BuildRequires:  pkgconfig(libnl-1)
+Url:            http://www.bluez.org
+Version:        4.101
+Release:        0
+Summary:        Bluetooth Stack for Linux
+License:        GPL-2.0+
+Group:          Hardware/Mobile
+Source:         bluez-%{version}.tar.gz
+Source2:        bluez-coldplug.init
+Source3:        bluetooth.sysconfig
+Source4:        bluetooth.sh
+Source5:        baselibs.conf
+Source7:        bluetooth.modprobe
+BuildRoot:      %{_tmppath}/%{name}-%{version}-build
+
+%define cups_lib_dir %{_prefix}/lib/cups
+
+%description
+The Bluetooth stack for Linux.
+
+%package devel
+Summary:        Files needed for BlueZ development
+License:        GPL-2.0+
+Group:          Development/Sources
+Requires:       libbluetooth = %{version}
+
+%description devel
+Files needed to develop applications for the BlueZ Bluetooth protocol
+stack.
+
+%package -n libbluetooth
+Summary:        Bluetooth Libraries
+License:        GPL-2.0+
+Group:          Hardware/Mobile
+
+%description -n libbluetooth
+Bluetooth protocol stack libraries.
+
+%package cups
+Summary:        CUPS Driver for Bluetooth Printers
+License:        GPL-2.0+
+Group:          Hardware/Printing
+Requires:       libbluetooth = %{version}
+
+%description cups
+Contains the files required by CUPS for printing to Bluetooth-connected
+printers.
+
+
+%package test
+Summary:        Tools for testing of various Bluetooth-functions
+License:        GPL-2.0+ ; MIT
+Group:          Development/Tools/Debuggers
+Requires:       dbus-python
+Requires:       libbluetooth = %{version}
+Requires:       python-gobject2
+
+%description test
+Contains a few tools for testing various bluetooth functions. The
+BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A.
+
+
+%package sbc
+Summary:        Bluetooth Low-Complexity, Sub-Band Codec Utilities
+License:        GPL-2.0+
+Group:          Hardware/Mobile
+Requires:       libbluetooth = %{version}
+Requires:       libsbc = %{version}
+
+%description sbc
+The package contains utilities for using the SBC codec.
+
+The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
+
+
+
+%package -n libsbc
+Summary:        Bluetooth Low-Complexity, Sub-Band Codec Library
+License:        GPL-2.0+
+Group:          Hardware/Mobile
+Requires:       libbluetooth = %{version}
+
+%description -n libsbc
+The package contains libraries for using the SBC codec.
+
+The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
+
+%package alsa
+Summary:        Bluetooth Sound Support
+License:        GPL-2.0+
+Group:          Productivity/Multimedia/Sound/Utilities
+Requires:       libbluetooth = %{version}
+Provides:       bluez-audio:%_libdir/alsa-lib/libasound_module_pcm_bluetooth.so
+
+%description alsa
+The package contains libraries for using bluetooth audio services.
+
+The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
+
+
+%package compat
+Summary:        Bluetooth Stack for Linux
+License:        GPL-2.0+
+Group:          Hardware/Mobile
+Requires:       libbluetooth = %{version}
+
+%description compat
+The Bluetooth stack for Linux. This package contains older and partly
+deprecated binaries that might still be needed for compatibility.
+
+
+%prep
+%setup -q
+
+%build
+autoreconf -fiv
+%configure  --with-pic \
+                       --libexecdir=/lib \
+                       --enable-gstreamer      \
+                       --enable-alsa           \
+                       --enable-usb            \
+                       --enable-tools          \
+                       --enable-bccmd          \
+                       --enable-hid2hci        \
+                       --enable-dfutool        \
+                       --enable-cups           \
+                       --enable-test           \
+                       --enable-pand           \
+                       --enable-dund           \
+                       --enable-proximity      \
+                       --enable-wiimote        \
+                       --enable-thermometer    \
+                       --enable-datafiles      \
+                       --enable-pcmcia \
+            --with-systemdunitdir=%{_unitdir} \
+                       %{?with_libcapng}
+make %{?_smp_mflags} all V=1
+
+%check
+make check
+
+%install
+%make_install
+
+# bluez-test
+cd test
+install --mode=0755    \
+       simple-agent    \
+       simple-service  \
+       list-devices    \
+       test-audio      \
+       test-adapter    \
+       test-device     \
+       test-discovery  \
+       test-input      \
+       test-manager    \
+       test-network    \
+       test-serial     \
+       test-service    \
+       test-telephony  \
+       $RPM_BUILD_ROOT/%{_bindir}/
+cd ..
+rm -rvf $RPM_BUILD_ROOT/%{_libdir}/gstreamer-*
+install --mode=0755 -D %{S:4} $RPM_BUILD_ROOT/usr/lib/udev/bluetooth.sh
+install --mode=0644 -D %{S:7} $RPM_BUILD_ROOT/%{_sysconfdir}/modprobe.d/50-bluetooth.conf
+# In openSUSE 11.3 there is upstream compliant CUPS 1.4
+# which means to have a fixed "/usr/lib/cups/" directory
+# on all platforms (see Novell/Suse Bugzilla bnc#575544):
+if ! test -e %{buildroot}%{cups_lib_dir}/backend/bluetooth
+then if test -e %{buildroot}%{_libdir}/cups/backend/bluetooth
+     then mkdir -p %{buildroot}%{cups_lib_dir}/backend
+          mv %{buildroot}%{_libdir}/cups/backend/bluetooth %{buildroot}%{cups_lib_dir}/backend/bluetooth
+     fi
+fi
+# no idea why this is suddenly necessary...
+install --mode 0755 -d $RPM_BUILD_ROOT/var/lib/bluetooth
+
+
+
+
+
+%post -n libsbc -p /sbin/ldconfig
+
+%postun -n libsbc -p /sbin/ldconfig
+
+%post -n libbluetooth -p /sbin/ldconfig
+
+%postun -n libbluetooth -p /sbin/ldconfig
+
+%files
+%defattr(-, root, root)
+%doc COPYING 
+%{_bindir}/hcitool
+%{_bindir}/l2ping
+%{_bindir}/rfcomm
+%{_bindir}/sdptool
+%{_bindir}/ciptool
+#%{_bindir}/dfutool
+%{_bindir}/gatttool
+%{_sbindir}/hciattach
+%{_sbindir}/hciconfig
+%{_sbindir}/bluetoothd
+#%{_sbindir}/hid2hci
+%{_sbindir}/bccmd
+%dir /usr/lib/udev
+/usr/lib/udev/*
+/usr/lib/udev/bluetooth_serial
+/usr/lib/udev/rules.d/97-bluetooth-serial.rules
+/usr/share/dbus-1/system-services/org.bluez.service
+%dir %{_sysconfdir}/bluetooth
+%config(noreplace) %{_sysconfdir}/bluetooth/main.conf
+%config(noreplace) %{_sysconfdir}/bluetooth/rfcomm.conf
+%config %{_sysconfdir}/dbus-1/system.d/bluetooth.conf
+%dir /var/lib/bluetooth
+%dir %{_sysconfdir}/modprobe.d
+%config(noreplace) %{_sysconfdir}/modprobe.d/50-bluetooth.conf
+%{_unitdir}/bluetooth.service
+
+%files devel
+%defattr(-, root, root)
+/usr/include/bluetooth
+%{_libdir}/libbluetooth.so
+%{_libdir}/pkgconfig/bluez.pc
+
+%files -n libbluetooth
+%defattr(-, root, root)
+%{_libdir}/libbluetooth.so.*
+%doc AUTHORS COPYING ChangeLog README
+
+%files cups
+%defattr(-,root,root)
+%dir %{cups_lib_dir}
+%dir %{cups_lib_dir}/backend
+%{cups_lib_dir}/backend/bluetooth
+
+%files test
+%defattr(-,root,root)
+%{_sbindir}/hciemu
+%{_bindir}/l2test
+%{_bindir}/rctest
+%{_bindir}/list-devices
+%{_bindir}/simple-agent
+%{_bindir}/simple-service
+%{_bindir}/test-adapter
+%{_bindir}/test-audio
+%{_bindir}/test-device
+%{_bindir}/test-discovery
+%{_bindir}/test-input
+%{_bindir}/test-manager
+%{_bindir}/test-network
+%{_bindir}/test-serial
+%{_bindir}/test-service
+%{_bindir}/test-telephony
+
+%files alsa
+%defattr(-,root,root)
+%dir /usr/share/alsa
+%config /usr/share/alsa/bluetooth.conf
+%{_libdir}/alsa-lib/*.so
+
+
+%files compat
+%defattr(-,root,root)
+%{_bindir}/dund
+%{_bindir}/pand
+
+%docs_package
+
+%changelog