GPIO: clps711x: Add DT support
authorAlexander Shiyan <shc_work@mail.ru>
Fri, 26 Apr 2013 15:47:30 +0000 (19:47 +0400)
committerOlof Johansson <olof@lixom.net>
Tue, 11 Jun 2013 22:44:57 +0000 (15:44 -0700)
Add DT support to the CLPS711X GPIO driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Documentation/devicetree/bindings/gpio/gpio-clps711x.txt [new file with mode: 0644]
drivers/gpio/gpio-clps711x.c

diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
new file mode 100644 (file)
index 0000000..e0d0446
--- /dev/null
@@ -0,0 +1,28 @@
+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-gpio"
+- reg: Physical base GPIO controller registers location and length.
+  There should be two registers, first is DATA register, the second
+  is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = active high
+    1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+       gpio0 = &porta;
+};
+
+porta: gpio@80000000 {
+       compatible = "cirrus,clps711x-gpio";
+       reg = <0x80000000 0x1>, <0x80000040 0x1>;
+       gpio-controller;
+       #gpio-cells = <2>;
+};
index 6ce8a8c..0edaf2c 100644 (file)
 
 static int clps711x_gpio_probe(struct platform_device *pdev)
 {
+       struct device_node *np = pdev->dev.of_node;
        void __iomem *dat, *dir;
        struct bgpio_chip *bgc;
        struct resource *res;
-       int err, id = pdev->id;
+       int err, id = np ? of_alias_get_id(np, "gpio") : pdev->id;
 
        if ((id < 0) || (id > 4))
                return -ENODEV;
@@ -76,10 +77,17 @@ static int clps711x_gpio_remove(struct platform_device *pdev)
        return bgpio_remove(bgc);
 }
 
+static const struct of_device_id clps711x_gpio_ids[] = {
+       { .compatible = "cirrus,clps711x-gpio" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, clps711x_gpio_ids);
+
 static struct platform_driver clps711x_gpio_driver = {
        .driver = {
-               .name   = "clps711x-gpio",
-               .owner  = THIS_MODULE,
+               .name           = "clps711x-gpio",
+               .owner          = THIS_MODULE,
+               .of_match_table = of_match_ptr(clps711x_gpio_ids),
        },
        .probe  = clps711x_gpio_probe,
        .remove = clps711x_gpio_remove,