bool "Ethernet support"
depends on ETRAX_ARCH_V10
select ETHERNET
- select NET_CORE
select MII
help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
bool "Ethernet support"
depends on ETRAX_ARCH_V32
select ETHERNET
- select NET_CORE
select MII
help
This option enables the ETRAX FS built-in 10/100Mbit Ethernet
# that for each of the symbols.
if NETDEVICES
+config MII
+ tristate
+
config NET_CORE
default y
bool "Network core driver support"
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
-config MII
- tristate "Generic Media Independent Interface device support"
- help
- Most ethernet controllers have MII transceiver either as an external
- or internal device. It is safe to say Y or M here even if your
- ethernet card lacks MII.
-
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA) && HAS_IOPORT
- select NET_CORE
select MII
---help---
This option enables driver support for a large number of 10Mbps and
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the PCI-Express gigabit ethernet adapters
tristate "Myson MTD-8xx PCI Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
config NET_NETX
tristate "NetX Ethernet support"
- select NET_CORE
select MII
depends on ARCH_NETX
---help---
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on HAS_IOMEM && HAS_DMA
- select NET_CORE
select MII
select PHYLIB
select CRC32
tristate "Adaptec Starfire/DuraLAN support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
tristate "Blackfin on-chip MAC support"
depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
select CRC32
- select NET_CORE
select MII
select PHYLIB
select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
depends on ARCH_SUNXI
depends on OF
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have an AMD 8111-based PCI LANCE ethernet card,
tristate "AMD PCnet32 PCI support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L2 fast ethernet adapter.
tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros/Attansic L1 gigabit ethernet
tristate "Atheros L1E Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L1E gigabit ethernet adapter.
tristate "Atheros L1C Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L1C gigabit ethernet adapter.
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
- select NET_CORE
select MII
select PHYLIB
help
config EP93XX_ETH
tristate "EP93xx Ethernet support"
depends on ARM && ARCH_EP93XX
- select NET_CORE
select MII
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS || COLDFIRE
select CRC32
- select NET_CORE
select MII
---help---
Support for DM9000 chipset.
tristate "Winbond W89c840 Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the Winbond W89c840 chip. It also works with
tristate "Sundance Alta support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the Sundance "Alta" chip.
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
- select NET_CORE
select MII
---help---
This driver supports the FTMAC100 10/100 Ethernet controller
config FS_ENET
tristate "Freescale Ethernet Driver"
depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
- select NET_CORE
select MII
select PHYLIB
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI
- select NET_CORE
select MII
---help---
This driver supports IP1000 gigabit Ethernet cards.
config E100
tristate "Intel(R) PRO/100+ support"
depends on PCI
- select NET_CORE
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
config ARM_KS8695_ETHER
tristate "KS8695 Ethernet support"
depends on ARM && ARCH_KS8695
- select NET_CORE
select MII
---help---
If you wish to compile a kernel for the KS8695 and want to
config KS8851
tristate "Micrel KS8851 SPI"
depends on SPI
- select NET_CORE
select MII
select CRC32
select EEPROM_93CX6
config KS8851_MLL
tristate "Micrel KS8851 MLL"
depends on HAS_IOMEM
- select NET_CORE
select MII
---help---
This platform driver is for Micrel KS8851 Address/data bus
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on PCI
- select NET_CORE
select MII
select CRC32
---help---
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
select PHYLIB
- select NET_CORE
select MII
---help---
Say Y here if you want to use built-in Ethernet ports
config PCH_GBE
tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI
- select NET_CORE
select MII
select PTP_1588_CLOCK_PCH
---help---
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
- select NET_CORE
select MII
---help---
If you have a Gigabit Ethernet card of this type, say Y and read
tristate "RDC R6040 Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
depends on PCI
select FW_LOADER
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
config SH_ETH
tristate "Renesas SuperH Ethernet support"
select CRC32
- select NET_CORE
select MII
select MDIO_BITBANG
select PHYLIB
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
select CRC32
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) card of this type, say Y and read
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
- select NET_CORE
select MII
depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
MN10300 || COLDFIRE || ARM64)
tristate "SMC 91Cxx PCMCIA support"
depends on PCMCIA
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
tristate "SMC EtherPower II"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
- select NET_CORE
select MII
depends on (ARM || SUPERH || MN10300)
---help---
tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
depends on HAS_IOMEM
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
config STMMAC_ETH
tristate "STMicroelectronics 10/100/1000 Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
- select NET_CORE
select MII
select PHYLIB
select CRC32
tristate "VIA Rhine support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
depends on (PCI || USE_OF)
select CRC32
select CRC_CCITT
- select NET_CORE
select MII
---help---
If you have a VIA "Velocity" based network card say Y here.
config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support"
- select NET_CORE
select MII
---help---
Say Y here if you know you have Pegasus or Pegasus-II based adapter.
config USB_RTL8150
tristate "USB RTL8150 based ethernet device support"
- select NET_CORE
select MII
help
Say Y here if you have RTL8150 based usb-ethernet adapter.
config USB_RTL8152
tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
- select NET_CORE
select MII
help
This option adds support for Realtek RTL8152 based USB 2.0
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select NET_CORE
select MII
---help---
This driver supports several kinds of network links over USB,
depends on PCI && NET
depends on m
select SBYPASS
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff