mmc: meson-gx: add support for mmc-pwrseq-emmc
authorNeil Armstrong <narmstrong@baylibre.com>
Fri, 11 Oct 2019 15:33:52 +0000 (17:33 +0200)
committerNeil Armstrong <narmstrong@baylibre.com>
Fri, 18 Oct 2019 12:24:05 +0000 (14:24 +0200)
Add support for mmc-pwrseq-emmc in the meson-gx mmc driver to support
enabling the eMMC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
drivers/mmc/meson_gx_mmc.c

index 767dfff..031cc79 100644 (file)
@@ -7,8 +7,10 @@
 #include <dm.h>
 #include <fdtdec.h>
 #include <malloc.h>
+#include <pwrseq.h>
 #include <mmc.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/sd_emmc.h>
 #include <linux/log2.h>
 
@@ -239,6 +241,10 @@ static int meson_mmc_probe(struct udevice *dev)
        struct mmc *mmc = &pdata->mmc;
        struct mmc_config *cfg = &pdata->cfg;
        uint32_t val;
+#ifdef CONFIG_PWRSEQ
+       struct udevice *pwr_dev;
+       int ret;
+#endif
 
        cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
                        MMC_VDD_31_32 | MMC_VDD_165_195;
@@ -254,6 +260,17 @@ static int meson_mmc_probe(struct udevice *dev)
 
        mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
 
+#ifdef CONFIG_PWRSEQ
+       /* Enable power if needed */
+       ret = uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq",
+                                          &pwr_dev);
+       if (!ret) {
+               ret = pwrseq_set_power(pwr_dev, true);
+               if (ret)
+                       return ret;
+       }
+#endif
+
        /* reset all status bits */
        meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
 
@@ -292,3 +309,37 @@ U_BOOT_DRIVER(meson_mmc) = {
        .ofdata_to_platdata = meson_mmc_ofdata_to_platdata,
        .platdata_auto_alloc_size = sizeof(struct meson_mmc_platdata),
 };
+
+#ifdef CONFIG_PWRSEQ
+static int meson_mmc_pwrseq_set_power(struct udevice *dev, bool enable)
+{
+       struct gpio_desc reset;
+       int ret;
+
+       ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT);
+       if (ret)
+               return ret;
+       dm_gpio_set_value(&reset, 1);
+       udelay(1);
+       dm_gpio_set_value(&reset, 0);
+       udelay(200);
+
+       return 0;
+}
+
+static const struct pwrseq_ops meson_mmc_pwrseq_ops = {
+       .set_power      = meson_mmc_pwrseq_set_power,
+};
+
+static const struct udevice_id meson_mmc_pwrseq_ids[] = {
+       { .compatible = "mmc-pwrseq-emmc" },
+       { }
+};
+
+U_BOOT_DRIVER(meson_mmc_pwrseq_drv) = {
+       .name           = "mmc_pwrseq_emmc",
+       .id             = UCLASS_PWRSEQ,
+       .of_match       = meson_mmc_pwrseq_ids,
+       .ops            = &meson_mmc_pwrseq_ops,
+};
+#endif