--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - SDK Camera
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-debug=3,avsysvideosrc:4 || NOT-USE-DEFAULT_VALUE
+ModelName = TIZEN_SDK
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = v4l2src | 1,1 | do-timestamp,1 | device,/dev/video0
+UseVideoscale = 0
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 2
+SupportMediaPacketPreviewCb = 0
+
+[AudioInput]
+AudioDevice = 0,1 || 0
+AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0
+VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 3,0 | qos,0 | sync,0 | enable-last-sample,0
+UseVideoscale = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+UseVideoconvert = 1
+VideoconvertElement = videoconvert | 0,0
+
+[VideoEncoder]
+H263 = avenc_h263p | 1,0 | compliance, -2
+MPEG4 = avenc_mpeg4 | 1,0 | compliance, -2
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance, -2
+WAVE = wavenc | 0,0
+VORBIS = vorbisenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 1
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+PlayCaptureSound = 1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 1
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 1
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 0
+RecordsinkElement = filesink | 1,0 | async,0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = avmux_mp4 | 0,0
+OGG = oggmux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - SDK Camera
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-debug=3,avsysvideosrc:4 || NOT-USE-DEFAULT_VALUE
-ModelName = TIZEN_SDK
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = v4l2src | 1,1 | do-timestamp,1 | device,/dev/video0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 2
-SupportMediaPacketPreviewCb = 0
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 3,0 | qos,0 | sync,0 | enable-last-sample,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-UseVideoconvert = 1
-VideoconvertElement = videoconvert | 0,0
-
-[VideoEncoder]
-H263 = avenc_h263p | 1,0 | compliance, -2
-MPEG4 = avenc_mpeg4 | 1,0 | compliance, -2
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance, -2
-WAVE = wavenc | 0,0
-VORBIS = vorbisenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-PlayCaptureSound = 1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 0
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-OGG = oggmux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - SDK Camera
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-debug=3,avsysvideosrc:4 || NOT-USE-DEFAULT_VALUE
-ModelName = TIZEN_SDK
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = v4l2src | 1,1 | do-timestamp,1 | device,/dev/video0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 2
-SupportMediaPacketPreviewCb = 0
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 3,0 | qos,0 | sync,0 | enable-last-sample,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[VideoEncoder]
-H263 = avenc_h263p | 1,0 | compliance, -2
-MPEG4 = avenc_mpeg4 | 1,0 | compliance, -2
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance, -2
-WAVE = wavenc | 0,0
-VORBIS = vorbisenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-PlayCaptureSound = 1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 0
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-OGG = oggmux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+; if disabled typefind element will used directely
+use decodebin = no ; async state change problem exist
+
+use sink handler = yes
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element = ffmpegcolorspace
+
+audiosink element = pulsesink
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = ffdec_, omx_, v4l2
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+gstparam1 =
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+generate dot = no
+
+; parameter for clock provide in audiosink
+provide clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 150 ; msec
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+
+
+[rtsp streaming]
+
+rtspsrc element = rtspsrc
+
+rtsp buffering time = 5000; msec
+
+rtsp rebuffering time = 15000; msec
+
+rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
+
+rtsp error concealment = yes
+
+
+[hw accelation]
+use video hw accel = no
+
+
+[priority]
+
+use priority setting = no
+
+demux = 95
+
+videosink = 96
+
+audiosink = 97
+
+ringbuffer = 98
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element = ffmpegcolorspace
-
-audiosink element = pulsesink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = ffdec_, omx_, v4l2
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element = ffmpegcolorspace
-
-audiosink element = avsysaudiosink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = ffdec_, omx_, v4l2
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = GT-TIZEN
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = tvcamerasrc | 1,1 | do-timestamp,1 | device,/dev/video241
+UseVideoscale = 1
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 1
+
+[AudioInput]
+AudioDevice = 0 || 0
+AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
+UseVideoscale = 1
+VideoscaleElement = fimcconvert | 1,0 | rotang,0
+VideodecoderElementH264 = avdec_h264 | 0,0
+
+[VideoEncoder]
+MPEG4 = avenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+MP3 = lame | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 0
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 0
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 0
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = avmux_mp4 | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = tvcamerasrc | 1,1 | do-timestamp,1 | device,/dev/video241
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 1
-
-[AudioInput]
-AudioDevice = 0 || 0
-AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-VideodecoderElementH264 = avdec_h264 | 0,0
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-MP3 = lame | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = tvcamerasrc | 1,1 | do-timestamp,1 | device,/dev/video241
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 1
-
-[AudioInput]
-AudioDevice = 0 || 0
-AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-MP3 = lame | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element =
+
+audiosink element = pulsesink
+
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = v4l2,omx
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter is for only video to be determined
+; which clock will be used
+; if yes, system clock will be used
+; apart from this, audiosink is clock provider for audio
+use system clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2,omx
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = GT-TIZEN
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = videotestsrc | 2,0 | do-timestamp,1 | is-live,1
+UseVideoscale = 1
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 2
+
+[AudioInput]
+AudioDevice = 0,1 || 0
+AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
+UseVideoscale = 1
+VideoscaleElement = fimcconvert | 1,0 | rotang,0
+;VideoscaleElement = videoscale
+
+[VideoEncoder]
+MPEG4 = avenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 1
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 0
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 1
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = mp4mux | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = videotestsrc | 2,0 | do-timestamp,1 | is-live,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 2
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-;VideoscaleElement = videoscale
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = videotestsrc | 2,0 | do-timestamp,1 | is-live,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 2
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-;VideoscaleElement = videoscale
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element =
+
+audiosink element = pulsesink
+
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = v4l2,omx
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter is for only video to be determined
+; which clock will be used
+; if yes, system clock will be used
+; apart from this, audiosink is clock provider for audio
+use system clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2,omx
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = TM1
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
+UseVideoscale = 0
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 1
+DeviceCount = 2
+SupportMediaPacketPreviewCb = 1
+
+[AudioInput]
+AudioDevice = 0,1 || 0
+AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
+UseVideoscale = 0
+VideoscaleElement = videoscale | 1,0 | rotang,90
+
+[VideoEncoder]
+H263 = sprdenc_h263 | 0,0
+H264 = sprdenc_h264 | 0,0
+MPEG4 = sprdenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 0
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 1
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 0
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+SupportDualStream = 0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = avmux_mp4 | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = TM1
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 1
-DeviceCount = 2
-SupportMediaPacketPreviewCb = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | rotang,90
-
-[VideoEncoder]
-H263 = sprdenc_h263 | 0,0
-H264 = sprdenc_h264 | 0,0
-MPEG4 = sprdenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-SupportDualStream = 0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = TM1
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 1
-DeviceCount = 2
-SupportMediaPacketPreviewCb = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | rotang,90
-
-[VideoEncoder]
-H263 = sprdenc_h263 | 0,0
-H264 = sprdenc_h264 | 0,0
-MPEG4 = sprdenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-SupportDualStream = 0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element =
+
+audiosink element = pulsesink
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = v4l2
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter is for only video to be determined
+; which clock will be used
+; if yes, system clock will be used
+; apart from this, audiosink is clock provider for audio
+use system clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element =
-
-audiosink element = pulsesink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = TW1
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+;VideosrcElement = v4l2src | 1,0 | do-timestamp,1
+UseVideoscale = 1
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 0
+
+[AudioInput]
+AudioDevice = 0,1 || 0
+AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
+UseVideoscale = 0
+VideoscaleElement = videoscale | 1,0 | rotang,90
+
+[VideoEncoder]
+MPEG4 = avenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 0
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 1
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 0
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+SupportDualStream = 0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = avmux_mp4 | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = TW1
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-;VideosrcElement = v4l2src | 1,0 | do-timestamp,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 0
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | rotang,90
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-SupportDualStream = 0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = TW1
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-;VideosrcElement = v4l2src | 1,0 | do-timestamp,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 0
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | rotang,90
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-SupportDualStream = 0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = avmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element =
+
+audiosink element = pulsesink
+
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = v4l2,omx
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter is for only video to be determined
+; which clock will be used
+; if yes, system clock will be used
+; apart from this, audiosink is clock provider for audio
+use system clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2,omx
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = GT-TIZEN
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = v4l2src | 1,0 | do-timestamp,1
+UseVideoscale = 1
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 1
+
+[AudioInput]
+AudioDevice = 0,1 || 0
+AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
+Videosink = 0,3,4 || 3
+VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
+UseVideoscale = 1
+VideoscaleElement = fimcconvert | 1,0 | rotang,0
+;VideoscaleElement = videoscale
+
+[VideoEncoder]
+MPEG4 = avenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 1
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 0
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 1
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = mp4mux | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = v4l2src | 1,0 | do-timestamp,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = waylandsink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-;VideoscaleElement = videoscale
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = v4l2src | 1,0 | do-timestamp,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-AudiomodemsrcElement = pulsesrc | 2,0 | do-timestamp,1 | blocksize,640
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 1
-VideoscaleElement = fimcconvert | 1,0 | rotang,0
-;VideoscaleElement = videoscale
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = avmux_3gp | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
--- /dev/null
+[general]
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element overlay = waylandsink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+videosink element remote = shmsink
+videosrc element remote = shmsrc
+
+video converter element =
+
+audiosink element = pulsesink
+
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+element exclude keyword = v4l2,omx
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter is for only video to be determined
+; which clock will be used
+; if yes, system clock will be used
+; apart from this, audiosink is clock provider for audio
+use system clock = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+; extracted pcm buffer size
+pcm buffer size = 51200 ; 50Kbytes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /home/owner/content
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = waylandsink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-videosink element remote = shmsink
-videosrc element remote = shmsrc
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2,omx
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
+++ /dev/null
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = xvimagesink
-videosink element evas = evasimagesink
-videosink element fake = fakesink
-
-video converter element =
-
-audiosink element = pulsesink
-
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = v4l2
-
-; ignore resume play just for debugging
-ignore first skip request = no
-
-;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
-video decoder type = 0
-audio decoder type = 0
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; for asm function enable = yes, disable = no
-enable asm = yes
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /home/owner/content
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-%bcond_with wayland
-
Name: mmfw-sysconf
Summary: Multimedia Framework system configuration package
-Version: 0.2.68
+Version: 0.2.69
Release: 0
Group: Multimedia/Configuration
License: LGPL-2.1+ and Apache-2.0
mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3
cp -arf %{name}-target-u3/* %{buildroot}%{_datadir}/%{name}-target-u3
-%if %{with wayland}
-mv %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
-%else
-mv %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini.x %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_player.ini.wayland
-rm %{buildroot}%{_datadir}/%{name}-target-u3%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland
-%endif
+
mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-u3%{_datadir}/license/%{name}-target-u3
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-u3%{_datadir}/license/%{name}-target-u3
mkdir -p %{buildroot}%{_datadir}/%{name}-target-n4
cp -arf %{name}-target-n4/* %{buildroot}%{_datadir}/%{name}-target-n4
-mv %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-target-n4%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
+
mkdir -p %{buildroot}%{_datadir}/%{name}-target-n4%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-n4%{_datadir}/license/%{name}-target-n4
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-n4%{_datadir}/license/%{name}-target-n4
mkdir -p %{buildroot}%{_datadir}/%{name}-target-hawkp
cp -arf %{name}-target-hawkp/* %{buildroot}%{_datadir}/%{name}-target-hawkp
-mv %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-target-hawkp%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
+
mkdir -p %{buildroot}%{_datadir}/%{name}-target-hawkp%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-hawkp%{_datadir}/license/%{name}-target-hawkp
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-hawkp%{_datadir}/license/%{name}-target-hawkp
mkdir -p %{buildroot}%{_datadir}/%{name}-target-tm1
cp -arf %{name}-target-tm1/* %{buildroot}%{_datadir}/%{name}-target-tm1
-mv %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-target-tm1%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
+
mkdir -p %{buildroot}%{_datadir}/%{name}-target-tm1%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-tm1%{_datadir}/license/%{name}-target-tm1
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-tm1%{_datadir}/license/%{name}-target-tm1
mkdir -p %{buildroot}%{_datadir}/%{name}-target-tw1
cp -arf %{name}-target-tw1/* %{buildroot}%{_datadir}/%{name}-target-tw1
-mv %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-target-tw1%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
+
mkdir -p %{buildroot}%{_datadir}/%{name}-target-tw1%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-tw1%{_datadir}/license/%{name}-target-tw1
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-tw1%{_datadir}/license/%{name}-target-tw1
mkdir -p %{buildroot}%{_datadir}/%{name}-simulator
cp -arf %{name}-simulator/* %{buildroot}%{_datadir}/%{name}-simulator
-%if %{with wayland}
-mv %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini.wayland %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini.x
-rm %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x
-%else
-mv %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini.x %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini
-mv %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini.x %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini
-rm %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_player.ini.wayland
-rm %{buildroot}%{_datadir}/%{name}-simulator%{_sysconfdir}/multimedia/mmfw_camcorder.ini.wayland
-%endif
+
mkdir -p %{buildroot}%{_datadir}/%{name}-simulator%{_datadir}/license
cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-simulator%{_datadir}/license/%{name}-simulator
cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-simulator%{_datadir}/license/%{name}-simulator
projects / platform / core / multimedia / mmfw-sysconf.git / commitdiff