ARM: mx3: remove some useless comments

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0d24b3c..b7d0953 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -42,10 +42,6 @@
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT       IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static int mx31_3ds_pins[] = {
        /* UART1 */
        MX31_PIN_CTS1__CTS1,
@@ -371,10 +367,6 @@ static struct sys_timer mx31_3ds_timer = {
        .init   = mx31_3ds_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31_3DS data structure.
- */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
        /* Maintainer: Freescale Semiconductor, Inc. */
        .boot_params = MX3x_PHYS_OFFSET + 0x100,

diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index cb80b96..14e7671 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -69,9 +69,6 @@
 #define EXPIO_INT_XUART_INTB   (MXC_EXP_IO_BASE + 11)
 
 #define MXC_MAX_EXP_IO_LINES   16
-/*
- * This file contains the board-specific initialization routines.
- */
 
 /*
  * The serial port definition structure.
@@ -497,9 +494,7 @@ static void mxc_init_audio(void)
        mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
-/*!
- * This structure defines static mappings for the i.MX31ADS board.
- */
+/* static mappings */
 static struct map_desc mx31ads_io_desc[] __initdata = {
        {
                .virtual        = MX31_CS4_BASE_ADDR_VIRT,
@@ -509,9 +504,6 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
        },
 };
 
-/*!
- * Set up static virtual mappings.
- */
 static void __init mx31ads_map_io(void)
 {
        mx31_map_io();
@@ -541,10 +533,6 @@ static struct sys_timer mx31ads_timer = {
        .init   = mx31ads_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31ADS data structure.
- */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
        /* Maintainer: Freescale Semiconductor, Inc. */
        .boot_params = MX3x_PHYS_OFFSET + 0x100,

diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index 0028163..17f758b 100644 (file)
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -54,10 +54,6 @@
 
 #define QONG_FPGA_IRQ          IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -263,11 +259,6 @@ static struct sys_timer qong_timer = {
        .init   = qong_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_QONG data structure.
- */
-
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
        /* Maintainer: DENX Software Engineering GmbH */
        .boot_params = MX3x_PHYS_OFFSET + 0x100,

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 3387319..eefd4cf 100644 (file)
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -28,14 +28,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
 
-/*!
- * @file mm.c
- *
- * @brief This file creates static virtual to physical mappings, common to all MX3 boards.
- *
- * @ingroup Memory
- */
-
 #ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
        imx_map_entry(MX31, X_MEMC, MT_DEVICE),
@@ -135,4 +127,3 @@ static int mxc_init_l2x0(void)
 
 arch_initcall(mxc_init_l2x0);
 #endif
-