----------------------------
-What: Support for driver specific ioctls in the pwc driver (everything
- defined in media/pwc-ioctl.h)
-When: 3.3
-Why: This stems from the v4l1 era, with v4l2 everything can be done with
- standardized v4l2 API calls
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: Software emulation of arbritary resolutions in the pwc driver
When: 3.3
Why: The pwc driver claims to support any resolution between 160x120
return r;
}
-static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
-{
- unsigned char buf[2];
- int ret;
-
- if (pdev->type < 730) {
- *on_value = -1;
- *off_value = -1;
- return 0;
- }
-
- ret = recv_control_msg(pdev,
- GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
- if (ret < 0)
- return ret;
- *on_value = buf[0] * 100;
- *off_value = buf[1] * 100;
- return 0;
-}
-
-static int _pwc_mpt_reset(struct pwc_device *pdev, int flags)
-{
- unsigned char buf;
- int r;
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- r = -ENODEV;
- goto leave;
- }
-
- buf = flags & 0x03; // only lower two bits are currently used
- r = send_control_msg(pdev,
- SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
-leave:
- mutex_unlock(&pdev->udevlock);
- return r;
-}
-
-int pwc_mpt_reset(struct pwc_device *pdev, int flags)
-{
- int ret;
- ret = _pwc_mpt_reset(pdev, flags);
- if (ret >= 0) {
- pdev->pan_angle = 0;
- pdev->tilt_angle = 0;
- }
- return ret;
-}
-
-static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
-{
- unsigned char buf[4];
- int r;
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- r = -ENODEV;
- goto leave;
- }
-
- /* set new relative angle; angles are expressed in degrees * 100,
- but cam as .5 degree resolution, hence divide by 200. Also
- the angle must be multiplied by 64 before it's send to
- the cam (??)
- */
- pan = 64 * pan / 100;
- tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */
- buf[0] = pan & 0xFF;
- buf[1] = (pan >> 8) & 0xFF;
- buf[2] = tilt & 0xFF;
- buf[3] = (tilt >> 8) & 0xFF;
- r = send_control_msg(pdev,
- SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
-leave:
- mutex_unlock(&pdev->udevlock);
- return r;
-}
-
-int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
-{
- int ret;
-
- /* check absolute ranges */
- if (pan < pdev->angle_range.pan_min ||
- pan > pdev->angle_range.pan_max ||
- tilt < pdev->angle_range.tilt_min ||
- tilt > pdev->angle_range.tilt_max)
- return -ERANGE;
-
- /* go to relative range, check again */
- pan -= pdev->pan_angle;
- tilt -= pdev->tilt_angle;
- /* angles are specified in degrees * 100, thus the limit = 36000 */
- if (pan < -36000 || pan > 36000 || tilt < -36000 || tilt > 36000)
- return -ERANGE;
-
- ret = _pwc_mpt_set_angle(pdev, pan, tilt);
- if (ret >= 0) {
- pdev->pan_angle += pan;
- pdev->tilt_angle += tilt;
- }
- if (ret == -EPIPE) /* stall -> out of range */
- ret = -ERANGE;
- return ret;
-}
-
-static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status)
-{
- int ret;
- unsigned char buf[5];
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- ret = -ENODEV;
- goto leave;
- }
-
- ret = recv_control_msg(pdev,
- GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
- if (ret < 0)
- goto leave;
- status->status = buf[0] & 0x7; // 3 bits are used for reporting
- status->time_pan = (buf[1] << 8) + buf[2];
- status->time_tilt = (buf[3] << 8) + buf[4];
-leave:
- mutex_unlock(&pdev->udevlock);
- return ret;
-}
-
#ifdef CONFIG_USB_PWC_DEBUG
int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
{
return 0;
}
#endif
-
- /* End of Add-Ons */
- /* ************************************************* */
-
-/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
- ioctl() calls. With 2.4, you have to do tedious copy_from_user()
- and copy_to_user() calls. With these macros we circumvent this,
- and let me maintain only one source file. The functionality is
- exactly the same otherwise.
- */
-
-/* define local variable for arg */
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type *ARG_name = arg;
-/* copy arg to local variable */
-#define ARG_IN(ARG_name) /* nothing */
-/* argument itself (referenced) */
-#define ARGR(ARG_name) (*ARG_name)
-/* argument address */
-#define ARGA(ARG_name) ARG_name
-/* copy local variable to arg */
-#define ARG_OUT(ARG_name) /* nothing */
-
-/*
- * Our ctrls use native values, but the old custom pwc ioctl interface expects
- * values from 0 - 65535, define 2 helper functions to scale things. */
-static int pwc_ioctl_g_ctrl(struct v4l2_ctrl *ctrl)
-{
- return v4l2_ctrl_g_ctrl(ctrl) * 65535 / ctrl->maximum;
-}
-
-static int pwc_ioctl_s_ctrl(struct v4l2_ctrl *ctrl, int val)
-{
- return v4l2_ctrl_s_ctrl(ctrl, val * ctrl->maximum / 65535);
-}
-
-long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
-{
- long ret = 0;
-
- switch(cmd) {
- case VIDIOCPWCRUSER:
- ret = v4l2_ctrl_s_ctrl(pdev->restore_user, 0);
- break;
-
- case VIDIOCPWCSUSER:
- ret = v4l2_ctrl_s_ctrl(pdev->save_user, 0);
- break;
-
- case VIDIOCPWCFACTORY:
- ret = v4l2_ctrl_s_ctrl(pdev->restore_factory, 0);
- break;
-
- case VIDIOCPWCSCQUAL:
- {
- ARG_DEF(int, qual)
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- ret = -ENODEV;
- goto leave;
- }
-
- if (pdev->iso_init) {
- ret = -EBUSY;
- goto leave;
- }
-
- ARG_IN(qual)
- if (ARGR(qual) < 0 || ARGR(qual) > 3)
- ret = -EINVAL;
- else
- ret = pwc_set_video_mode(pdev,
- pdev->view.x, pdev->view.y,
- pdev->vframes, ARGR(qual));
-leave:
- mutex_unlock(&pdev->udevlock);
- break;
- }
-
- case VIDIOCPWCGCQUAL:
- {
- ARG_DEF(int, qual)
-
- ARGR(qual) = pdev->vcompression;
- ARG_OUT(qual)
- break;
- }
-
- case VIDIOCPWCPROBE:
- {
- ARG_DEF(struct pwc_probe, probe)
-
- strcpy(ARGR(probe).name, pdev->vdev.name);
- ARGR(probe).type = pdev->type;
- ARG_OUT(probe)
- break;
- }
-
- case VIDIOCPWCGSERIAL:
- {
- ARG_DEF(struct pwc_serial, serial)
-
- strcpy(ARGR(serial).serial, pdev->serial);
- ARG_OUT(serial)
- break;
- }
-
- case VIDIOCPWCSAGC:
- {
- ARG_DEF(int, agc)
- ARG_IN(agc)
- ret = v4l2_ctrl_s_ctrl(pdev->autogain, ARGR(agc) < 0);
- if (ret == 0 && ARGR(agc) >= 0)
- ret = pwc_ioctl_s_ctrl(pdev->gain, ARGR(agc));
- break;
- }
-
- case VIDIOCPWCGAGC:
- {
- ARG_DEF(int, agc)
- if (v4l2_ctrl_g_ctrl(pdev->autogain))
- ARGR(agc) = -1;
- else
- ARGR(agc) = pwc_ioctl_g_ctrl(pdev->gain);
- ARG_OUT(agc)
- break;
- }
-
- case VIDIOCPWCSSHUTTER:
- {
- ARG_DEF(int, shutter)
- ARG_IN(shutter)
- ret = v4l2_ctrl_s_ctrl(pdev->exposure_auto,
- /* Menu idx 0 = auto, idx 1 = manual */
- ARGR(shutter) >= 0);
- if (ret == 0 && ARGR(shutter) >= 0)
- ret = pwc_ioctl_s_ctrl(pdev->exposure, ARGR(shutter));
- break;
- }
-
- case VIDIOCPWCSAWB:
- {
- ARG_DEF(struct pwc_whitebalance, wb)
- ARG_IN(wb)
- ret = v4l2_ctrl_s_ctrl(pdev->auto_white_balance,
- ARGR(wb).mode);
- if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
- ret = pwc_ioctl_s_ctrl(pdev->red_balance,
- ARGR(wb).manual_red);
- if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
- ret = pwc_ioctl_s_ctrl(pdev->blue_balance,
- ARGR(wb).manual_blue);
- break;
- }
-
- case VIDIOCPWCGAWB:
- {
- ARG_DEF(struct pwc_whitebalance, wb)
- ARGR(wb).mode = v4l2_ctrl_g_ctrl(pdev->auto_white_balance);
- ARGR(wb).manual_red = ARGR(wb).read_red =
- pwc_ioctl_g_ctrl(pdev->red_balance);
- ARGR(wb).manual_blue = ARGR(wb).read_blue =
- pwc_ioctl_g_ctrl(pdev->blue_balance);
- ARG_OUT(wb)
- break;
- }
-
- case VIDIOCPWCSAWBSPEED:
- {
- ARG_DEF(struct pwc_wb_speed, wbs)
-
- if (ARGR(wbs).control_speed > 0) {
- ret = pwc_ioctl_s_ctrl(pdev->awb_speed,
- ARGR(wbs).control_speed);
- }
- if (ret == 0 && ARGR(wbs).control_delay > 0) {
- ret = pwc_ioctl_s_ctrl(pdev->awb_delay,
- ARGR(wbs).control_delay);
- }
- break;
- }
-
- case VIDIOCPWCGAWBSPEED:
- {
- ARG_DEF(struct pwc_wb_speed, wbs)
-
- ARGR(wbs).control_speed = v4l2_ctrl_g_ctrl(pdev->awb_speed);
- ARGR(wbs).control_delay = v4l2_ctrl_g_ctrl(pdev->awb_delay);
- ARG_OUT(wbs)
- break;
- }
-
- case VIDIOCPWCSLED:
- {
- ARG_DEF(struct pwc_leds, leds)
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- ret = -ENODEV;
- break;
- }
-
- ARG_IN(leds)
- ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
-
- mutex_unlock(&pdev->udevlock);
- break;
- }
-
-
- case VIDIOCPWCGLED:
- {
- ARG_DEF(struct pwc_leds, leds)
-
- mutex_lock(&pdev->udevlock);
- if (!pdev->udev) {
- ret = -ENODEV;
- break;
- }
-
- ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
- ARG_OUT(leds)
-
- mutex_unlock(&pdev->udevlock);
- break;
- }
-
- case VIDIOCPWCSCONTOUR:
- {
- ARG_DEF(int, contour)
- ARG_IN(contour)
- ret = v4l2_ctrl_s_ctrl(pdev->autocontour, ARGR(contour) < 0);
- if (ret == 0 && ARGR(contour) >= 0)
- ret = pwc_ioctl_s_ctrl(pdev->contour, ARGR(contour));
- break;
- }
-
- case VIDIOCPWCGCONTOUR:
- {
- ARG_DEF(int, contour)
- if (v4l2_ctrl_g_ctrl(pdev->autocontour))
- ARGR(contour) = -1;
- else
- ARGR(contour) = pwc_ioctl_g_ctrl(pdev->contour);
- ARG_OUT(contour)
- break;
- }
-
- case VIDIOCPWCSBACKLIGHT:
- {
- ARG_DEF(int, backlight)
- ARG_IN(backlight)
- ret = v4l2_ctrl_s_ctrl(pdev->backlight, ARGR(backlight));
- break;
- }
-
- case VIDIOCPWCGBACKLIGHT:
- {
- ARG_DEF(int, backlight)
- ARGR(backlight) = v4l2_ctrl_g_ctrl(pdev->backlight);
- ARG_OUT(backlight)
- break;
- }
-
- case VIDIOCPWCSFLICKER:
- {
- ARG_DEF(int, flicker)
- ARG_IN(flicker)
- ret = v4l2_ctrl_s_ctrl(pdev->flicker, ARGR(flicker));
- break;
- }
-
- case VIDIOCPWCGFLICKER:
- {
- ARG_DEF(int, flicker)
- ARGR(flicker) = v4l2_ctrl_g_ctrl(pdev->flicker);
- ARG_OUT(flicker)
- break;
- }
-
- case VIDIOCPWCSDYNNOISE:
- {
- ARG_DEF(int, dynnoise)
- ARG_IN(dynnoise)
- ret = v4l2_ctrl_s_ctrl(pdev->noise_reduction, ARGR(dynnoise));
- break;
- }
-
- case VIDIOCPWCGDYNNOISE:
- {
- ARG_DEF(int, dynnoise)
- ARGR(dynnoise) = v4l2_ctrl_g_ctrl(pdev->noise_reduction);
- ARG_OUT(dynnoise);
- break;
- }
-
- case VIDIOCPWCGREALSIZE:
- {
- ARG_DEF(struct pwc_imagesize, size)
-
- ARGR(size).width = pdev->image.x;
- ARGR(size).height = pdev->image.y;
- ARG_OUT(size)
- break;
- }
-
- case VIDIOCPWCMPTRESET:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(int, flags)
-
- ARG_IN(flags)
- ret = pwc_mpt_reset(pdev, ARGR(flags));
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTGRANGE:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_range, range)
-
- ARGR(range) = pdev->angle_range;
- ARG_OUT(range)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSANGLE:
- {
- int new_pan, new_tilt;
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARG_IN(angles)
- /* The camera can only set relative angles, so
- do some calculations when getting an absolute angle .
- */
- if (ARGR(angles).absolute)
- {
- new_pan = ARGR(angles).pan;
- new_tilt = ARGR(angles).tilt;
- }
- else
- {
- new_pan = pdev->pan_angle + ARGR(angles).pan;
- new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
- }
- ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt);
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTGANGLE:
- {
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARGR(angles).absolute = 1;
- ARGR(angles).pan = pdev->pan_angle;
- ARGR(angles).tilt = pdev->tilt_angle;
- ARG_OUT(angles)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSTATUS:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- ARG_DEF(struct pwc_mpt_status, status)
-
- ret = pwc_mpt_get_status(pdev, ARGA(status));
- ARG_OUT(status)
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCGVIDCMD:
- {
- ARG_DEF(struct pwc_video_command, vcmd);
-
- ARGR(vcmd).type = pdev->type;
- ARGR(vcmd).release = pdev->release;
- ARGR(vcmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(vcmd).bandlength = pdev->vbandlength;
- ARGR(vcmd).frame_size = pdev->frame_size;
- ARG_OUT(vcmd)
- break;
- }
- /*
- case VIDIOCPWCGVIDTABLE:
- {
- ARG_DEF(struct pwc_table_init_buffer, table);
- ARGR(table).len = pdev->cmd_len;
- memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size);
- ARG_OUT(table)
- break;
- }
- */
-
- default:
- ret = -ENOIOCTLCMD;
- break;
- }
-
- if (ret > 0)
- return 0;
- return ret;
-}
-
-
-/* vim: set cinoptions= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
#include "pwc-timon.h"
#include "pwc-kiara.h"
#include "pwc-dec23.h"
-#include <media/pwc-ioctl.h>
#include <linux/string.h>
#include <linux/slab.h>
pdev->vframes = default_fps;
strcpy(pdev->serial, serial_number);
pdev->features = features;
- if (vendor_id == 0x046D && product_id == 0x08B5) {
- /* Logitech QuickCam Orbit
- The ranges have been determined experimentally; they may differ from cam to cam.
- Also, the exact ranges left-right and up-down are different for my cam
- */
- pdev->angle_range.pan_min = -7000;
- pdev->angle_range.pan_max = 7000;
- pdev->angle_range.tilt_min = -3000;
- pdev->angle_range.tilt_max = 2500;
- }
pwc_construct(pdev); /* set min/max sizes correct */
mutex_init(&pdev->capt_file_lock);
#ifndef PWC_KIARA_H
#define PWC_KIARA_H
-#include <media/pwc-ioctl.h>
+#include "pwc.h"
#define PWC_FPS_MAX_KIARA 6
#ifndef PWC_TIMON_H
#define PWC_TIMON_H
-#include <media/pwc-ioctl.h>
+#include "pwc.h"
#define PWC_FPS_MAX_TIMON 6
return 0;
}
-static long pwc_default(struct file *file, void *fh, bool valid_prio,
- int cmd, void *arg)
-{
- struct pwc_device *pdev = video_drvdata(file);
-
- return pwc_ioctl(pdev, cmd, arg);
-}
-
const struct v4l2_ioctl_ops pwc_ioctl_ops = {
.vidioc_querycap = pwc_querycap,
.vidioc_enum_input = pwc_enum_input,
.vidioc_log_status = pwc_log_status,
.vidioc_enum_framesizes = pwc_enum_framesizes,
.vidioc_enum_frameintervals = pwc_enum_frameintervals,
- .vidioc_default = pwc_default,
};
-
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
#include <linux/input.h>
#endif
-#include <media/pwc-ioctl.h>
-
/* Version block */
#define PWC_VERSION "10.0.15"
#define PWC_NAME "pwc"
#define PT_RESET_CONTROL_FORMATTER 0x02
#define PT_STATUS_FORMATTER 0x03
+/* Enumeration of image sizes */
+#define PSZ_SQCIF 0x00
+#define PSZ_QSIF 0x01
+#define PSZ_QCIF 0x02
+#define PSZ_SIF 0x03
+#define PSZ_CIF 0x04
+#define PSZ_VGA 0x05
+#define PSZ_MAX 6
+
+struct pwc_raw_frame {
+ __le16 type; /* type of the webcam */
+ __le16 vbandlength; /* Size of 4 lines compressed (used by the
+ decompressor) */
+ __u8 cmd[4]; /* the four byte of the command (in case of
+ nala, only the first 3 bytes is filled) */
+ __u8 rawframe[0]; /* frame_size = H / 4 * vbandlength */
+} __packed;
+
+/* structure for transferring x & y coordinates */
+struct pwc_coord {
+ int x, y; /* guess what */
+ int size; /* size, or offset */
+};
+
/* intermediate buffers with raw data from the USB cam */
struct pwc_frame_buf
{
struct pwc_coord image, view; /* image and viewport size */
struct pwc_coord offset; /* offset of the viewport */
- /*** motorized pan/tilt feature */
- struct pwc_mpt_range angle_range;
- int pan_angle; /* in degrees * 100 */
- int tilt_angle; /* absolute angle; 0,0 is home */
-
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
struct input_dev *button_dev; /* webcam snapshot button input */
char button_phys[64];
extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height,
int frames, int compression);
extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size);
-extern int pwc_mpt_reset(struct pwc_device *pdev, int flags);
-extern int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt);
extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
extern int send_control_msg(struct pwc_device *pdev,
/* Power down or up the camera; not supported by all models */
extern void pwc_camera_power(struct pwc_device *pdev, int power);
-/* Private ioctl()s; see pwc-ioctl.h */
-extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg);
-
extern const struct v4l2_ioctl_ops pwc_ioctl_ops;
/** pwc-uncompress.c */
+++ /dev/null
-#ifndef PWC_IOCTL_H
-#define PWC_IOCTL_H
-
-/* (C) 2001-2004 Nemosoft Unv.
- (C) 2004-2006 Luc Saillard (luc@saillard.org)
-
- NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
- driver and thus may have bugs that are not present in the original version.
- Please send bug reports and support requests to <luc@saillard.org>.
- The decompression routines have been implemented by reverse-engineering the
- Nemosoft binary pwcx module. Caveat emptor.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-/* This is pwc-ioctl.h belonging to PWC 10.0.10
- It contains structures and defines to communicate from user space
- directly to the driver.
- */
-
-/*
- Changes
- 2001/08/03 Alvarado Added ioctl constants to access methods for
- changing white balance and red/blue gains
- 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE
- 2003/12/13 Nemosft Unv. Some modifications to make interfacing to
- PWCX easier
- 2006/01/01 Luc Saillard Add raw format definition
- */
-
-/* These are private ioctl() commands, specific for the Philips webcams.
- They contain functions not found in other webcams, and settings not
- specified in the Video4Linux API.
-
- The #define names are built up like follows:
- VIDIOC VIDeo IOCtl prefix
- PWC Philps WebCam
- G optional: Get
- S optional: Set
- ... the function
- */
-
-#include <linux/types.h>
-
-/* Enumeration of image sizes */
-#define PSZ_SQCIF 0x00
-#define PSZ_QSIF 0x01
-#define PSZ_QCIF 0x02
-#define PSZ_SIF 0x03
-#define PSZ_CIF 0x04
-#define PSZ_VGA 0x05
-#define PSZ_MAX 6
-
-
-/* The frame rate is encoded in the video_window.flags parameter using
- the upper 16 bits, since some flags are defined nowadays. The following
- defines provide a mask and shift to filter out this value.
- This value can also be passing using the private flag when using v4l2 and
- VIDIOC_S_FMT ioctl.
-
- In 'Snapshot' mode the camera freezes its automatic exposure and colour
- balance controls.
- */
-#define PWC_FPS_SHIFT 16
-#define PWC_FPS_MASK 0x00FF0000
-#define PWC_FPS_FRMASK 0x003F0000
-#define PWC_FPS_SNAPSHOT 0x00400000
-#define PWC_QLT_MASK 0x03000000
-#define PWC_QLT_SHIFT 24
-
-
-/* structure for transferring x & y coordinates */
-struct pwc_coord
-{
- int x, y; /* guess what */
- int size; /* size, or offset */
-};
-
-
-/* Used with VIDIOCPWCPROBE */
-struct pwc_probe
-{
- char name[32];
- int type;
-};
-
-struct pwc_serial
-{
- char serial[30]; /* String with serial number. Contains terminating 0 */
-};
-
-/* pwc_whitebalance.mode values */
-#define PWC_WB_INDOOR 0
-#define PWC_WB_OUTDOOR 1
-#define PWC_WB_FL 2
-#define PWC_WB_MANUAL 3
-#define PWC_WB_AUTO 4
-
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
- Set mode to one of the PWC_WB_* values above.
- *red and *blue are the respective gains of these colour components inside
- the camera; range 0..65535
- When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
- otherwise undefined.
- 'read_red' and 'read_blue' are read-only.
-*/
-struct pwc_whitebalance
-{
- int mode;
- int manual_red, manual_blue; /* R/W */
- int read_red, read_blue; /* R/O */
-};
-
-/*
- 'control_speed' and 'control_delay' are used in automatic whitebalance mode,
- and tell the camera how fast it should react to changes in lighting, and
- with how much delay. Valid values are 0..65535.
-*/
-struct pwc_wb_speed
-{
- int control_speed;
- int control_delay;
-
-};
-
-/* Used with VIDIOCPWC[SG]LED */
-struct pwc_leds
-{
- int led_on; /* Led on-time; range = 0..25000 */
- int led_off; /* Led off-time; range = 0..25000 */
-};
-
-/* Image size (used with GREALSIZE) */
-struct pwc_imagesize
-{
- int width;
- int height;
-};
-
-/* Defines and structures for Motorized Pan & Tilt */
-#define PWC_MPT_PAN 0x01
-#define PWC_MPT_TILT 0x02
-#define PWC_MPT_TIMEOUT 0x04 /* for status */
-
-/* Set angles; when absolute != 0, the angle is absolute and the
- driver calculates the relative offset for you. This can only
- be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
- absolute angles.
- */
-struct pwc_mpt_angles
-{
- int absolute; /* write-only */
- int pan; /* degrees * 100 */
- int tilt; /* degress * 100 */
-};
-
-/* Range of angles of the camera, both horizontally and vertically.
- */
-struct pwc_mpt_range
-{
- int pan_min, pan_max; /* degrees * 100 */
- int tilt_min, tilt_max;
-};
-
-struct pwc_mpt_status
-{
- int status;
- int time_pan;
- int time_tilt;
-};
-
-
-/* This is used for out-of-kernel decompression. With it, you can get
- all the necessary information to initialize and use the decompressor
- routines in standalone applications.
- */
-struct pwc_video_command
-{
- int type; /* camera type (645, 675, 730, etc.) */
- int release; /* release number */
-
- int size; /* one of PSZ_* */
- int alternate;
- int command_len; /* length of USB video command */
- unsigned char command_buf[13]; /* Actual USB video command */
- int bandlength; /* >0 = compressed */
- int frame_size; /* Size of one (un)compressed frame */
-};
-
-/* Flags for PWCX subroutines. Not all modules honour all flags. */
-#define PWCX_FLAG_PLANAR 0x0001
-#define PWCX_FLAG_BAYER 0x0008
-
-
-/* IOCTL definitions */
-
- /* Restore user settings */
-#define VIDIOCPWCRUSER _IO('v', 192)
- /* Save user settings */
-#define VIDIOCPWCSUSER _IO('v', 193)
- /* Restore factory settings */
-#define VIDIOCPWCFACTORY _IO('v', 194)
-
- /* You can manipulate the compression factor. A compression preference of 0
- means use uncompressed modes when available; 1 is low compression, 2 is
- medium and 3 is high compression preferred. Of course, the higher the
- compression, the lower the bandwidth used but more chance of artefacts
- in the image. The driver automatically chooses a higher compression when
- the preferred mode is not available.
- */
- /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */
-#define VIDIOCPWCSCQUAL _IOW('v', 195, int)
- /* Get preferred compression quality */
-#define VIDIOCPWCGCQUAL _IOR('v', 195, int)
-
-
-/* Retrieve serial number of camera */
-#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial)
-
- /* This is a probe function; since so many devices are supported, it
- becomes difficult to include all the names in programs that want to
- check for the enhanced Philips stuff. So in stead, try this PROBE;
- it returns a structure with the original name, and the corresponding
- Philips type.
- To use, fill the structure with zeroes, call PROBE and if that succeeds,
- compare the name with that returned from VIDIOCGCAP; they should be the
- same. If so, you can be assured it is a Philips (OEM) cam and the type
- is valid.
- */
-#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe)
-
- /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
-#define VIDIOCPWCSAGC _IOW('v', 200, int)
- /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCGAGC _IOR('v', 200, int)
- /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCSSHUTTER _IOW('v', 201, int)
-
- /* Color compensation (Auto White Balance) */
-#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance)
-#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance)
-
- /* Auto WB speed */
-#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed)
-#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed)
-
- /* LEDs on/off/blink; int range 0..65535 */
-#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds)
-#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds)
-
- /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
-#define VIDIOCPWCSCONTOUR _IOW('v', 206, int)
-#define VIDIOCPWCGCONTOUR _IOR('v', 206, int)
-
- /* Backlight compensation; 0 = off, otherwise on */
-#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int)
-#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int)
-
- /* Flickerless mode; = 0 off, otherwise on */
-#define VIDIOCPWCSFLICKER _IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
-
- /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
-#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int)
-#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int)
-
- /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
-#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize)
-
- /* Motorized pan & tilt functions */
-#define VIDIOCPWCMPTRESET _IOW('v', 211, int)
-#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range)
-#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status)
-
- /* Get the USB set-video command; needed for initializing libpwcx */
-#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command)
-struct pwc_table_init_buffer {
- int len;
- char *buffer;
-
-};
-#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer)
-
-/*
- * This is private command used when communicating with v4l2.
- * In the future all private ioctl will be remove/replace to
- * use interface offer by v4l2.
- */
-
-#define V4L2_CID_PRIVATE_SAVE_USER (V4L2_CID_PRIVATE_BASE + 0)
-#define V4L2_CID_PRIVATE_RESTORE_USER (V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_PRIVATE_COLOUR_MODE (V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_PRIVATE_AUTOCONTOUR (V4L2_CID_PRIVATE_BASE + 4)
-#define V4L2_CID_PRIVATE_CONTOUR (V4L2_CID_PRIVATE_BASE + 5)
-#define V4L2_CID_PRIVATE_BACKLIGHT (V4L2_CID_PRIVATE_BASE + 6)
-#define V4L2_CID_PRIVATE_FLICKERLESS (V4L2_CID_PRIVATE_BASE + 7)
-#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8)
-
-struct pwc_raw_frame {
- __le16 type; /* type of the webcam */
- __le16 vbandlength; /* Size of 4lines compressed (used by the decompressor) */
- __u8 cmd[4]; /* the four byte of the command (in case of nala,
- only the first 3 bytes is filled) */
- __u8 rawframe[0]; /* frame_size = H/4*vbandlength */
-} __attribute__ ((packed));
-
-
-#endif
projects / platform / kernel / linux-stable.git / commitdiff