net: phy: at803x: only the AT8030 needs a hardware reset on link change

Commit 13a56b44 ("at803x: Add support for hardware reset") added a
work-around for a hardware bug on the AT8030.  However, the work-around
was being called for all 803x PHYs, even those that don't need it.
Function at803x_link_change_notify() checks to make sure that it only
resets the PHY on the 8030, but it makes more sense to not call that
function at all if it isn't needed.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index b3ffaee..f279a89 100644 (file)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -359,27 +359,25 @@ static void at803x_link_change_notify(struct phy_device *phydev)
         * in the FIFO. In such cases, the FIFO enters an error mode it
         * cannot recover from by software.
         */
-       if (phydev->drv->phy_id == ATH8030_PHY_ID) {
-               if (phydev->state == PHY_NOLINK) {
-                       if (priv->gpiod_reset && !priv->phy_reset) {
-                               struct at803x_context context;
-
-                               at803x_context_save(phydev, &context);
-
-                               gpiod_set_value(priv->gpiod_reset, 1);
-                               msleep(1);
-                               gpiod_set_value(priv->gpiod_reset, 0);
-                               msleep(1);
-
-                               at803x_context_restore(phydev, &context);
-
-                               phydev_dbg(phydev, "%s(): phy was reset\n",
-                                          __func__);
-                               priv->phy_reset = true;
-                       }
-               } else {
-                       priv->phy_reset = false;
+       if (phydev->state == PHY_NOLINK) {
+               if (priv->gpiod_reset && !priv->phy_reset) {
+                       struct at803x_context context;
+
+                       at803x_context_save(phydev, &context);
+
+                       gpiod_set_value(priv->gpiod_reset, 1);
+                       msleep(1);
+                       gpiod_set_value(priv->gpiod_reset, 0);
+                       msleep(1);
+
+                       at803x_context_restore(phydev, &context);
+
+                       phydev_dbg(phydev, "%s(): phy was reset\n",
+                                  __func__);
+                       priv->phy_reset = true;
                }
+       } else {
+               priv->phy_reset = false;
        }
 }
 
@@ -391,7 +389,6 @@ static struct phy_driver at803x_driver[] = {
        .phy_id_mask            = 0xffffffef,
        .probe                  = at803x_probe,
        .config_init            = at803x_config_init,
-       .link_change_notify     = at803x_link_change_notify,
        .set_wol                = at803x_set_wol,
        .get_wol                = at803x_get_wol,
        .suspend                = at803x_suspend,
@@ -427,7 +424,6 @@ static struct phy_driver at803x_driver[] = {
        .phy_id_mask            = 0xffffffef,
        .probe                  = at803x_probe,
        .config_init            = at803x_config_init,
-       .link_change_notify     = at803x_link_change_notify,
        .set_wol                = at803x_set_wol,
        .get_wol                = at803x_get_wol,
        .suspend                = at803x_suspend,