* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits)
time: Prevent 32 bit overflow with set_normalized_timespec()
clocksource: Delay clocksource down rating to late boot
clocksource: clocksource_select must be called with mutex locked
clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash
timers: Drop a function prototype
clocksource: Resolve cpu hotplug dead lock with TSC unstable
timer.c: Fix S/390 comments
timekeeping: Fix invalid getboottime() value
timekeeping: Fix up read_persistent_clock() breakage on sh
timekeeping: Increase granularity of read_persistent_clock(), build fix
time: Introduce CLOCK_REALTIME_COARSE
x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown
clocksource: Avoid clocksource watchdog circular locking dependency
clocksource: Protect the watchdog rating changes with clocksource_mutex
clocksource: Call clocksource_change_rating() outside of watchdog_lock
timekeeping: Introduce read_boot_clock
timekeeping: Increase granularity of read_persistent_clock()
timekeeping: Update clocksource with stop_machine
timekeeping: Add timekeeper read_clock helper functions
timekeeping: Move NTP adjusted clock multiplier to struct timekeeper
...
Fix trivial conflict due to MIPS lemote -> loongson renaming.
*/
unsigned long long sched_clock(void)
{
- unsigned long long ret;
-
- ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
- ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
- return ret;
+ return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+ clocksource_32k.mult, clocksource_32k.shift);
}
static int __init omap_init_clocksource_32k(void)
return mktime(year, mon, day, hour, min, sec);
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- return read_rtc_mmss();
+ ts->tv_sec = read_rtc_mmss();
+ ts->tv_nsec = 0;
}
int update_persistent_clock(struct timespec now)
#include <asm/dec/ioasic.h>
#include <asm/dec/machtype.h>
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
unsigned int year, mon, day, hour, min, sec, real_year;
unsigned long flags;
year += real_year - 72 + 2000;
- return mktime(year, mon, day, hour, min, sec);
+ ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+ ts->tv_nsec = 0;
}
/*
lasat_ndelay(1000);
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
unsigned long word;
unsigned long flags;
rtc_end_op();
spin_unlock_irqrestore(&rtc_lock, flags);
- return word;
+ ts->tv_sec = word;
+ ts->tv_nsec = 0;
}
int rtc_mips_set_mmss(unsigned long time)
int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
+ struct timespec ts;
int r;
if (!write) {
- rtctmp = read_persistent_clock();
+ read_persistent_clock(&ts);
+ rtctmp = ts.tv_sec;
/* check for time < 0 and set to 0 */
if (rtctmp < 0)
rtctmp = 0;
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
+ struct timespec ts;
int r;
- rtctmp = read_persistent_clock();
+ read_persistent_clock(&ts);
+ rtctmp = ts.tv_sec;
if (rtctmp < 0)
rtctmp = 0;
r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
mips_hpt_frequency = cpu_clock_freq / 2;
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- return mc146818_get_cmos_time();
+ ts->tv_sec = return mc146818_get_cmos_time();
+ ts->tv_nsec = 0;
}
return count;
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- return mc146818_get_cmos_time();
+ ts->tv_sec = mc146818_get_cmos_time();
+ ts->tv_nsec = 0;
}
static void __init plat_perf_setup(void)
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
unsigned int year, month, day, hour, min, sec;
unsigned long flags;
m48t37_base->control = 0x00;
spin_unlock_irqrestore(&rtc_lock, flags);
- return mktime(year, month, day, hour, min, sec);
+ ts->tv_sec = mktime(year, month, day, hour, min, sec);
+ ts->tv_nsec = 0;
}
int rtc_mips_set_time(unsigned long tim)
enum swarm_rtc_type swarm_rtc_type;
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
+ unsigned long sec;
+
switch (swarm_rtc_type) {
case RTC_XICOR:
- return xicor_get_time();
+ sec = xicor_get_time();
+ break;
case RTC_M4LT81:
- return m41t81_get_time();
+ sec = m41t81_get_time();
+ break;
case RTC_NONE:
default:
- return mktime(2000, 1, 1, 0, 0, 0);
+ sec = mktime(2000, 1, 1, 0, 0, 0);
+ break;
}
+ ts->tv_sec = sec;
+ tv->tv_nsec = 0;
}
int rtc_mips_set_time(unsigned long sec)
setup_pit_timer();
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- return -1;
+ ts->tv_sec = -1;
+ ts->tv_nsec = 0;
}
return ppc_md.set_rtc_time(&tm);
}
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
static int first = 1;
+ ts->tv_nsec = 0;
/* XXX this is a litle fragile but will work okay in the short term */
if (first) {
first = 0;
timezone_offset = ppc_md.time_init();
/* get_boot_time() isn't guaranteed to be safe to call late */
- if (ppc_md.get_boot_time)
- return ppc_md.get_boot_time() -timezone_offset;
+ if (ppc_md.get_boot_time) {
+ ts->tv_sec = ppc_md.get_boot_time() - timezone_offset;
+ return;
+ }
+ }
+ if (!ppc_md.get_rtc_time) {
+ ts->tv_sec = 0;
+ return;
}
- if (!ppc_md.get_rtc_time)
- return 0;
ppc_md.get_rtc_time(&tm);
- return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
+ ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
}
/* clocksource code */
static void etr_reset(void);
static void stp_reset(void);
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- struct timespec ts;
+ tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, ts);
+}
- tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
- return ts.tv_sec;
+void read_boot_clock(struct timespec *ts)
+{
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, ts);
}
static cycle_t read_tod_clock(struct clocksource *cs)
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+struct clocksource * __init clocksource_default_clock(void)
+{
+ return &clocksource_tod;
+}
void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
{
*/
void __init time_init(void)
{
- struct timespec ts;
- unsigned long flags;
- cycle_t now;
-
/* Reset time synchronization interfaces. */
etr_reset();
stp_reset();
if (clocksource_register(&clocksource_tod) != 0)
panic("Could not register TOD clock source");
- /*
- * The TOD clock is an accurate clock. The xtime should be
- * initialized in a way that the difference between TOD and
- * xtime is reasonably small. Too bad that timekeeping_init
- * sets xtime.tv_nsec to zero. In addition the clock source
- * change from the jiffies clock source to the TOD clock
- * source add another error of up to 1/HZ second. The same
- * function sets wall_to_monotonic to a value that is too
- * small for /proc/uptime to be accurate.
- * Reset xtime and wall_to_monotonic to sane values.
- */
- write_seqlock_irqsave(&xtime_lock, flags);
- now = get_clock();
- tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
- clocksource_tod.cycle_last = now;
- clocksource_tod.raw_time = xtime;
- tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
- set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
#ifdef CONFIG_GENERIC_CMOS_UPDATE
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
- struct timespec tv;
- rtc_sh_get_time(&tv);
- return tv.tv_sec;
+ rtc_sh_get_time(ts);
}
int update_persistent_clock(struct timespec now)
u32 shift;
} clock;
struct timespec wall_to_monotonic;
+ struct timespec wall_time_coarse;
};
extern struct vsyscall_gtod_data __vsyscall_gtod_data
__section_vsyscall_gtod_data;
DEFINE_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
-#ifdef CONFIG_X86_32
-static void pit_disable_clocksource(void);
-#else
-static inline void pit_disable_clocksource(void) { }
-#endif
-
/*
* HPET replaces the PIT, when enabled. So we need to know, which of
* the two timers is used
outb_pit(0, PIT_CH0);
outb_pit(0, PIT_CH0);
}
- pit_disable_clocksource();
break;
case CLOCK_EVT_MODE_ONESHOT:
/* One shot setup */
- pit_disable_clocksource();
outb_pit(0x38, PIT_MODE);
break;
.shift = 20,
};
-static void pit_disable_clocksource(void)
-{
- /*
- * Use mult to check whether it is registered or not
- */
- if (pit_cs.mult) {
- clocksource_unregister(&pit_cs);
- pit_cs.mult = 0;
- }
-}
-
static int __init init_pit_clocksource(void)
{
/*
}
/* not static: needed by APM */
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
{
unsigned long retval, flags;
retval = get_wallclock();
spin_unlock_irqrestore(&rtc_lock, flags);
- return retval;
+ ts->tv_sec = retval;
+ ts->tv_nsec = 0;
}
int update_persistent_clock(struct timespec now)
}
#endif
+static void resume_tsc(void)
+{
+ clocksource_tsc.cycle_last = 0;
+}
+
static struct clocksource clocksource_tsc = {
.name = "tsc",
.rating = 300,
.read = read_tsc,
+ .resume = resume_tsc,
.mask = CLOCKSOURCE_MASK(64),
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
{
if (!tsc_unstable) {
tsc_unstable = 1;
- printk("Marking TSC unstable due to %s\n", reason);
+ printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
/* Change only the rating, when not registered */
if (clocksource_tsc.mult)
- clocksource_change_rating(&clocksource_tsc, 0);
- else
+ clocksource_mark_unstable(&clocksource_tsc);
+ else {
+ clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE;
clocksource_tsc.rating = 0;
+ }
}
}
vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
+ vsyscall_gtod_data.wall_time_coarse = __current_kernel_time();
write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
}
return 0;
}
+notrace static noinline int do_realtime_coarse(struct timespec *ts)
+{
+ unsigned long seq;
+ do {
+ seq = read_seqbegin(>od->lock);
+ ts->tv_sec = gtod->wall_time_coarse.tv_sec;
+ ts->tv_nsec = gtod->wall_time_coarse.tv_nsec;
+ } while (unlikely(read_seqretry(>od->lock, seq)));
+ return 0;
+}
+
+notrace static noinline int do_monotonic_coarse(struct timespec *ts)
+{
+ unsigned long seq, ns, secs;
+ do {
+ seq = read_seqbegin(>od->lock);
+ secs = gtod->wall_time_coarse.tv_sec;
+ ns = gtod->wall_time_coarse.tv_nsec;
+ secs += gtod->wall_to_monotonic.tv_sec;
+ ns += gtod->wall_to_monotonic.tv_nsec;
+ } while (unlikely(read_seqretry(>od->lock, seq)));
+ vset_normalized_timespec(ts, secs, ns);
+ return 0;
+}
+
notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
{
- if (likely(gtod->sysctl_enabled && gtod->clock.vread))
+ if (likely(gtod->sysctl_enabled))
switch (clock) {
case CLOCK_REALTIME:
- return do_realtime(ts);
+ if (likely(gtod->clock.vread))
+ return do_realtime(ts);
+ break;
case CLOCK_MONOTONIC:
- return do_monotonic(ts);
+ if (likely(gtod->clock.vread))
+ return do_monotonic(ts);
+ break;
+ case CLOCK_REALTIME_COARSE:
+ return do_realtime_coarse(ts);
+ case CLOCK_MONOTONIC_COARSE:
+ return do_monotonic_coarse(ts);
}
return vdso_fallback_gettime(clock, ts);
}
void __init time_init(void)
{
- xtime.tv_nsec = 0;
- xtime.tv_sec = read_persistent_clock();
-
+ /* FIXME: xtime&wall_to_monotonic are set in timekeeping_init. */
+ read_persistent_clock(&xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
#include <linux/list.h>
#include <linux/cache.h>
#include <linux/timer.h>
+#include <linux/init.h>
#include <asm/div64.h>
#include <asm/io.h>
* @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
- * @mult: cycle to nanosecond multiplier (adjusted by NTP)
- * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP)
+ * @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @flags: flags describing special properties
* @vread: vsyscall based read
* @resume: resume function for the clocksource, if necessary
- * @cycle_interval: Used internally by timekeeping core, please ignore.
- * @xtime_interval: Used internally by timekeeping core, please ignore.
*/
struct clocksource {
/*
void (*disable)(struct clocksource *cs);
cycle_t mask;
u32 mult;
- u32 mult_orig;
u32 shift;
unsigned long flags;
cycle_t (*vread)(void);
#define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0)
#endif
- /* timekeeping specific data, ignore */
- cycle_t cycle_interval;
- u64 xtime_interval;
- u32 raw_interval;
/*
* Second part is written at each timer interrupt
* Keep it in a different cache line to dirty no
* more than one cache line.
*/
cycle_t cycle_last ____cacheline_aligned_in_smp;
- u64 xtime_nsec;
- s64 error;
- struct timespec raw_time;
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
#endif
};
-extern struct clocksource *clock; /* current clocksource */
-
/*
* Clock source flags bits::
*/
#define CLOCK_SOURCE_WATCHDOG 0x10
#define CLOCK_SOURCE_VALID_FOR_HRES 0x20
+#define CLOCK_SOURCE_UNSTABLE 0x40
/* simplify initialization of mask field */
#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
}
/**
- * clocksource_read: - Access the clocksource's current cycle value
- * @cs: pointer to clocksource being read
- *
- * Uses the clocksource to return the current cycle_t value
- */
-static inline cycle_t clocksource_read(struct clocksource *cs)
-{
- return cs->read(cs);
-}
-
-/**
- * clocksource_enable: - enable clocksource
- * @cs: pointer to clocksource
- *
- * Enables the specified clocksource. The clocksource callback
- * function should start up the hardware and setup mult and field
- * members of struct clocksource to reflect hardware capabilities.
- */
-static inline int clocksource_enable(struct clocksource *cs)
-{
- int ret = 0;
-
- if (cs->enable)
- ret = cs->enable(cs);
-
- /*
- * The frequency may have changed while the clocksource
- * was disabled. If so the code in ->enable() must update
- * the mult value to reflect the new frequency. Make sure
- * mult_orig follows this change.
- */
- cs->mult_orig = cs->mult;
-
- return ret;
-}
-
-/**
- * clocksource_disable: - disable clocksource
- * @cs: pointer to clocksource
- *
- * Disables the specified clocksource. The clocksource callback
- * function should power down the now unused hardware block to
- * save power.
- */
-static inline void clocksource_disable(struct clocksource *cs)
-{
- /*
- * Save mult_orig in mult so clocksource_enable() can
- * restore the value regardless if ->enable() updates
- * the value of mult or not.
- */
- cs->mult = cs->mult_orig;
-
- if (cs->disable)
- cs->disable(cs);
-}
-
-/**
- * cyc2ns - converts clocksource cycles to nanoseconds
- * @cs: Pointer to clocksource
- * @cycles: Cycles
+ * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
*
- * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
+ * Converts cycles to nanoseconds, using the given mult and shift.
*
* XXX - This could use some mult_lxl_ll() asm optimization
*/
-static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles)
-{
- u64 ret = (u64)cycles;
- ret = (ret * cs->mult) >> cs->shift;
- return ret;
-}
-
-/**
- * clocksource_calculate_interval - Calculates a clocksource interval struct
- *
- * @c: Pointer to clocksource.
- * @length_nsec: Desired interval length in nanoseconds.
- *
- * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
- * pair and interval request.
- *
- * Unless you're the timekeeping code, you should not be using this!
- */
-static inline void clocksource_calculate_interval(struct clocksource *c,
- unsigned long length_nsec)
+static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
{
- u64 tmp;
-
- /* Do the ns -> cycle conversion first, using original mult */
- tmp = length_nsec;
- tmp <<= c->shift;
- tmp += c->mult_orig/2;
- do_div(tmp, c->mult_orig);
-
- c->cycle_interval = (cycle_t)tmp;
- if (c->cycle_interval == 0)
- c->cycle_interval = 1;
-
- /* Go back from cycles -> shifted ns, this time use ntp adjused mult */
- c->xtime_interval = (u64)c->cycle_interval * c->mult;
- c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift;
+ return ((u64) cycles * mult) >> shift;
}
extern struct clocksource* clocksource_get_next(void);
extern void clocksource_change_rating(struct clocksource *cs, int rating);
extern void clocksource_resume(void);
+extern struct clocksource * __init __weak clocksource_default_clock(void);
+extern void clocksource_mark_unstable(struct clocksource *cs);
#ifdef CONFIG_GENERIC_TIME_VSYSCALL
extern void update_vsyscall(struct timespec *ts, struct clocksource *c);
}
#endif
+extern void timekeeping_notify(struct clocksource *clock);
+
#endif /* _LINUX_CLOCKSOURCE_H */
* @function: timer expiry callback function
* @base: pointer to the timer base (per cpu and per clock)
* @state: state information (See bit values above)
- * @cb_entry: list head to enqueue an expired timer into the callback list
* @start_site: timer statistics field to store the site where the timer
* was started
* @start_comm: timer statistics field to store the name of the process which
enum hrtimer_restart (*function)(struct hrtimer *);
struct hrtimer_clock_base *base;
unsigned long state;
- struct list_head cb_entry;
#ifdef CONFIG_TIMER_STATS
int start_pid;
void *start_site;
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
-extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
extern struct timespec timespec_add_safe(const struct timespec lhs,
const struct timespec rhs);
extern struct timespec wall_to_monotonic;
extern seqlock_t xtime_lock;
-extern unsigned long read_persistent_clock(void);
+extern void read_persistent_clock(struct timespec *ts);
+extern void read_boot_clock(struct timespec *ts);
extern int update_persistent_clock(struct timespec now);
extern int no_sync_cmos_clock __read_mostly;
void timekeeping_init(void);
unsigned long get_seconds(void);
struct timespec current_kernel_time(void);
+struct timespec __current_kernel_time(void); /* does not hold xtime_lock */
+struct timespec get_monotonic_coarse(void);
#define CURRENT_TIME (current_kernel_time())
#define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 })
extern int timekeeping_valid_for_hres(void);
extern void update_wall_time(void);
extern void update_xtime_cache(u64 nsec);
+extern void timekeeping_leap_insert(int leapsecond);
struct tms;
extern void do_sys_times(struct tms *);
#define CLOCK_PROCESS_CPUTIME_ID 2
#define CLOCK_THREAD_CPUTIME_ID 3
#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
/*
* The IDs of various hardware clocks:
/*
* Return when the next timer-wheel timeout occurs (in absolute jiffies),
- * locks the timer base:
- */
-extern unsigned long next_timer_interrupt(void);
-/*
- * Return when the next timer-wheel timeout occurs (in absolute jiffies),
* locks the timer base and does the comparison against the given
* jiffie.
*/
#include <asm/uaccess.h>
-/**
- * ktime_get - get the monotonic time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t ktime_get(void)
-{
- struct timespec now;
-
- ktime_get_ts(&now);
-
- return timespec_to_ktime(now);
-}
-EXPORT_SYMBOL_GPL(ktime_get);
-
-/**
- * ktime_get_real - get the real (wall-) time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t ktime_get_real(void)
-{
- struct timespec now;
-
- getnstimeofday(&now);
-
- return timespec_to_ktime(now);
-}
-
-EXPORT_SYMBOL_GPL(ktime_get_real);
-
/*
* The timer bases:
*
}
};
-/**
- * ktime_get_ts - get the monotonic clock in timespec format
- * @ts: pointer to timespec variable
- *
- * The function calculates the monotonic clock from the realtime
- * clock and the wall_to_monotonic offset and stores the result
- * in normalized timespec format in the variable pointed to by @ts.
- */
-void ktime_get_ts(struct timespec *ts)
-{
- struct timespec tomono;
- unsigned long seq;
-
- do {
- seq = read_seqbegin(&xtime_lock);
- getnstimeofday(ts);
- tomono = wall_to_monotonic;
-
- } while (read_seqretry(&xtime_lock, seq));
-
- set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
- ts->tv_nsec + tomono.tv_nsec);
-}
-EXPORT_SYMBOL_GPL(ktime_get_ts);
-
/*
* Get the coarse grained time at the softirq based on xtime and
* wall_to_monotonic.
clock_id = CLOCK_MONOTONIC;
timer->base = &cpu_base->clock_base[clock_id];
- INIT_LIST_HEAD(&timer->cb_entry);
hrtimer_init_timer_hres(timer);
#ifdef CONFIG_TIMER_STATS
return 0;
}
+
+static int posix_get_realtime_coarse(clockid_t which_clock, struct timespec *tp)
+{
+ *tp = current_kernel_time();
+ return 0;
+}
+
+static int posix_get_monotonic_coarse(clockid_t which_clock,
+ struct timespec *tp)
+{
+ *tp = get_monotonic_coarse();
+ return 0;
+}
+
+int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp)
+{
+ *tp = ktime_to_timespec(KTIME_LOW_RES);
+ return 0;
+}
/*
* Initialize everything, well, just everything in Posix clocks/timers ;)
*/
.timer_create = no_timer_create,
.nsleep = no_nsleep,
};
+ struct k_clock clock_realtime_coarse = {
+ .clock_getres = posix_get_coarse_res,
+ .clock_get = posix_get_realtime_coarse,
+ .clock_set = do_posix_clock_nosettime,
+ .timer_create = no_timer_create,
+ .nsleep = no_nsleep,
+ };
+ struct k_clock clock_monotonic_coarse = {
+ .clock_getres = posix_get_coarse_res,
+ .clock_get = posix_get_monotonic_coarse,
+ .clock_set = do_posix_clock_nosettime,
+ .timer_create = no_timer_create,
+ .nsleep = no_nsleep,
+ };
register_posix_clock(CLOCK_REALTIME, &clock_realtime);
register_posix_clock(CLOCK_MONOTONIC, &clock_monotonic);
register_posix_clock(CLOCK_MONOTONIC_RAW, &clock_monotonic_raw);
+ register_posix_clock(CLOCK_REALTIME_COARSE, &clock_realtime_coarse);
+ register_posix_clock(CLOCK_MONOTONIC_COARSE, &clock_monotonic_coarse);
posix_timers_cache = kmem_cache_create("posix_timers_cache",
sizeof (struct k_itimer), 0, SLAB_PANIC,
* 0 <= tv_nsec < NSEC_PER_SEC
* For negative values only the tv_sec field is negative !
*/
-void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec)
+void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec)
{
while (nsec >= NSEC_PER_SEC) {
+ /*
+ * The following asm() prevents the compiler from
+ * optimising this loop into a modulo operation. See
+ * also __iter_div_u64_rem() in include/linux/time.h
+ */
+ asm("" : "+rm"(nsec));
nsec -= NSEC_PER_SEC;
++sec;
}
while (nsec < 0) {
+ asm("" : "+rm"(nsec));
nsec += NSEC_PER_SEC;
--sec;
}
*
* TODO WishList:
* o Allow clocksource drivers to be unregistered
- * o get rid of clocksource_jiffies extern
*/
#include <linux/clocksource.h>
#include <linux/module.h>
#include <linux/sched.h> /* for spin_unlock_irq() using preempt_count() m68k */
#include <linux/tick.h>
+#include <linux/kthread.h>
void timecounter_init(struct timecounter *tc,
const struct cyclecounter *cc,
}
EXPORT_SYMBOL(timecounter_cyc2time);
-/* XXX - Would like a better way for initializing curr_clocksource */
-extern struct clocksource clocksource_jiffies;
-
/*[Clocksource internal variables]---------
* curr_clocksource:
- * currently selected clocksource. Initialized to clocksource_jiffies.
- * next_clocksource:
- * pending next selected clocksource.
+ * currently selected clocksource.
* clocksource_list:
* linked list with the registered clocksources
- * clocksource_lock:
- * protects manipulations to curr_clocksource and next_clocksource
- * and the clocksource_list
+ * clocksource_mutex:
+ * protects manipulations to curr_clocksource and the clocksource_list
* override_name:
* Name of the user-specified clocksource.
*/
-static struct clocksource *curr_clocksource = &clocksource_jiffies;
-static struct clocksource *next_clocksource;
-static struct clocksource *clocksource_override;
+static struct clocksource *curr_clocksource;
static LIST_HEAD(clocksource_list);
-static DEFINE_SPINLOCK(clocksource_lock);
+static DEFINE_MUTEX(clocksource_mutex);
static char override_name[32];
static int finished_booting;
-/* clocksource_done_booting - Called near the end of core bootup
- *
- * Hack to avoid lots of clocksource churn at boot time.
- * We use fs_initcall because we want this to start before
- * device_initcall but after subsys_initcall.
- */
-static int __init clocksource_done_booting(void)
-{
- finished_booting = 1;
- return 0;
-}
-fs_initcall(clocksource_done_booting);
-
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
+static void clocksource_watchdog_work(struct work_struct *work);
+
static LIST_HEAD(watchdog_list);
static struct clocksource *watchdog;
static struct timer_list watchdog_timer;
+static DECLARE_WORK(watchdog_work, clocksource_watchdog_work);
static DEFINE_SPINLOCK(watchdog_lock);
static cycle_t watchdog_last;
-static unsigned long watchdog_resumed;
+static int watchdog_running;
+
+static int clocksource_watchdog_kthread(void *data);
+static void __clocksource_change_rating(struct clocksource *cs, int rating);
/*
* Interval: 0.5sec Threshold: 0.0625s
#define WATCHDOG_INTERVAL (HZ >> 1)
#define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
-static void clocksource_ratewd(struct clocksource *cs, int64_t delta)
+static void clocksource_watchdog_work(struct work_struct *work)
{
- if (delta > -WATCHDOG_THRESHOLD && delta < WATCHDOG_THRESHOLD)
- return;
+ /*
+ * If kthread_run fails the next watchdog scan over the
+ * watchdog_list will find the unstable clock again.
+ */
+ kthread_run(clocksource_watchdog_kthread, NULL, "kwatchdog");
+}
+static void __clocksource_unstable(struct clocksource *cs)
+{
+ cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
+ cs->flags |= CLOCK_SOURCE_UNSTABLE;
+ if (finished_booting)
+ schedule_work(&watchdog_work);
+}
+
+static void clocksource_unstable(struct clocksource *cs, int64_t delta)
+{
printk(KERN_WARNING "Clocksource %s unstable (delta = %Ld ns)\n",
cs->name, delta);
- cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
- clocksource_change_rating(cs, 0);
- list_del(&cs->wd_list);
+ __clocksource_unstable(cs);
+}
+
+/**
+ * clocksource_mark_unstable - mark clocksource unstable via watchdog
+ * @cs: clocksource to be marked unstable
+ *
+ * This function is called instead of clocksource_change_rating from
+ * cpu hotplug code to avoid a deadlock between the clocksource mutex
+ * and the cpu hotplug mutex. It defers the update of the clocksource
+ * to the watchdog thread.
+ */
+void clocksource_mark_unstable(struct clocksource *cs)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&watchdog_lock, flags);
+ if (!(cs->flags & CLOCK_SOURCE_UNSTABLE)) {
+ if (list_empty(&cs->wd_list))
+ list_add(&cs->wd_list, &watchdog_list);
+ __clocksource_unstable(cs);
+ }
+ spin_unlock_irqrestore(&watchdog_lock, flags);
}
static void clocksource_watchdog(unsigned long data)
{
- struct clocksource *cs, *tmp;
+ struct clocksource *cs;
cycle_t csnow, wdnow;
int64_t wd_nsec, cs_nsec;
- int resumed;
+ int next_cpu;
spin_lock(&watchdog_lock);
-
- resumed = test_and_clear_bit(0, &watchdog_resumed);
+ if (!watchdog_running)
+ goto out;
wdnow = watchdog->read(watchdog);
- wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
+ wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask,
+ watchdog->mult, watchdog->shift);
watchdog_last = wdnow;
- list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
- csnow = cs->read(cs);
+ list_for_each_entry(cs, &watchdog_list, wd_list) {
- if (unlikely(resumed)) {
- cs->wd_last = csnow;
+ /* Clocksource already marked unstable? */
+ if (cs->flags & CLOCK_SOURCE_UNSTABLE) {
+ if (finished_booting)
+ schedule_work(&watchdog_work);
continue;
}
- /* Initialized ? */
+ csnow = cs->read(cs);
+
+ /* Clocksource initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
- if ((cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
- (watchdog->flags & CLOCK_SOURCE_IS_CONTINUOUS)) {
- cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
- /*
- * We just marked the clocksource as
- * highres-capable, notify the rest of the
- * system as well so that we transition
- * into high-res mode:
- */
- tick_clock_notify();
- }
cs->flags |= CLOCK_SOURCE_WATCHDOG;
cs->wd_last = csnow;
- } else {
- cs_nsec = cyc2ns(cs, (csnow - cs->wd_last) & cs->mask);
- cs->wd_last = csnow;
- /* Check the delta. Might remove from the list ! */
- clocksource_ratewd(cs, cs_nsec - wd_nsec);
+ continue;
}
- }
- if (!list_empty(&watchdog_list)) {
- /*
- * Cycle through CPUs to check if the CPUs stay
- * synchronized to each other.
- */
- int next_cpu = cpumask_next(raw_smp_processor_id(),
- cpu_online_mask);
+ /* Check the deviation from the watchdog clocksource. */
+ cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) &
+ cs->mask, cs->mult, cs->shift);
+ cs->wd_last = csnow;
+ if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
+ clocksource_unstable(cs, cs_nsec - wd_nsec);
+ continue;
+ }
- if (next_cpu >= nr_cpu_ids)
- next_cpu = cpumask_first(cpu_online_mask);
- watchdog_timer.expires += WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer, next_cpu);
+ if (!(cs->flags & CLOCK_SOURCE_VALID_FOR_HRES) &&
+ (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
+ (watchdog->flags & CLOCK_SOURCE_IS_CONTINUOUS)) {
+ cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
+ /*
+ * We just marked the clocksource as highres-capable,
+ * notify the rest of the system as well so that we
+ * transition into high-res mode:
+ */
+ tick_clock_notify();
+ }
}
+
+ /*
+ * Cycle through CPUs to check if the CPUs stay synchronized
+ * to each other.
+ */
+ next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
+ if (next_cpu >= nr_cpu_ids)
+ next_cpu = cpumask_first(cpu_online_mask);
+ watchdog_timer.expires += WATCHDOG_INTERVAL;
+ add_timer_on(&watchdog_timer, next_cpu);
+out:
spin_unlock(&watchdog_lock);
}
+
+static inline void clocksource_start_watchdog(void)
+{
+ if (watchdog_running || !watchdog || list_empty(&watchdog_list))
+ return;
+ init_timer(&watchdog_timer);
+ watchdog_timer.function = clocksource_watchdog;
+ watchdog_last = watchdog->read(watchdog);
+ watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
+ add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask));
+ watchdog_running = 1;
+}
+
+static inline void clocksource_stop_watchdog(void)
+{
+ if (!watchdog_running || (watchdog && !list_empty(&watchdog_list)))
+ return;
+ del_timer(&watchdog_timer);
+ watchdog_running = 0;
+}
+
+static inline void clocksource_reset_watchdog(void)
+{
+ struct clocksource *cs;
+
+ list_for_each_entry(cs, &watchdog_list, wd_list)
+ cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+}
+
static void clocksource_resume_watchdog(void)
{
- set_bit(0, &watchdog_resumed);
+ unsigned long flags;
+
+ spin_lock_irqsave(&watchdog_lock, flags);
+ clocksource_reset_watchdog();
+ spin_unlock_irqrestore(&watchdog_lock, flags);
}
-static void clocksource_check_watchdog(struct clocksource *cs)
+static void clocksource_enqueue_watchdog(struct clocksource *cs)
{
- struct clocksource *cse;
unsigned long flags;
spin_lock_irqsave(&watchdog_lock, flags);
if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
- int started = !list_empty(&watchdog_list);
-
+ /* cs is a clocksource to be watched. */
list_add(&cs->wd_list, &watchdog_list);
- if (!started && watchdog) {
- watchdog_last = watchdog->read(watchdog);
- watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer,
- cpumask_first(cpu_online_mask));
- }
+ cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
} else {
+ /* cs is a watchdog. */
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
-
+ /* Pick the best watchdog. */
if (!watchdog || cs->rating > watchdog->rating) {
- if (watchdog)
- del_timer(&watchdog_timer);
watchdog = cs;
- init_timer(&watchdog_timer);
- watchdog_timer.function = clocksource_watchdog;
-
/* Reset watchdog cycles */
- list_for_each_entry(cse, &watchdog_list, wd_list)
- cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
- /* Start if list is not empty */
- if (!list_empty(&watchdog_list)) {
- watchdog_last = watchdog->read(watchdog);
- watchdog_timer.expires =
- jiffies + WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer,
- cpumask_first(cpu_online_mask));
- }
+ clocksource_reset_watchdog();
+ }
+ }
+ /* Check if the watchdog timer needs to be started. */
+ clocksource_start_watchdog();
+ spin_unlock_irqrestore(&watchdog_lock, flags);
+}
+
+static void clocksource_dequeue_watchdog(struct clocksource *cs)
+{
+ struct clocksource *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&watchdog_lock, flags);
+ if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
+ /* cs is a watched clocksource. */
+ list_del_init(&cs->wd_list);
+ } else if (cs == watchdog) {
+ /* Reset watchdog cycles */
+ clocksource_reset_watchdog();
+ /* Current watchdog is removed. Find an alternative. */
+ watchdog = NULL;
+ list_for_each_entry(tmp, &clocksource_list, list) {
+ if (tmp == cs || tmp->flags & CLOCK_SOURCE_MUST_VERIFY)
+ continue;
+ if (!watchdog || tmp->rating > watchdog->rating)
+ watchdog = tmp;
}
}
+ cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+ /* Check if the watchdog timer needs to be stopped. */
+ clocksource_stop_watchdog();
spin_unlock_irqrestore(&watchdog_lock, flags);
}
-#else
-static void clocksource_check_watchdog(struct clocksource *cs)
+
+static int clocksource_watchdog_kthread(void *data)
+{
+ struct clocksource *cs, *tmp;
+ unsigned long flags;
+ LIST_HEAD(unstable);
+
+ mutex_lock(&clocksource_mutex);
+ spin_lock_irqsave(&watchdog_lock, flags);
+ list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list)
+ if (cs->flags & CLOCK_SOURCE_UNSTABLE) {
+ list_del_init(&cs->wd_list);
+ list_add(&cs->wd_list, &unstable);
+ }
+ /* Check if the watchdog timer needs to be stopped. */
+ clocksource_stop_watchdog();
+ spin_unlock_irqrestore(&watchdog_lock, flags);
+
+ /* Needs to be done outside of watchdog lock */
+ list_for_each_entry_safe(cs, tmp, &unstable, wd_list) {
+ list_del_init(&cs->wd_list);
+ __clocksource_change_rating(cs, 0);
+ }
+ mutex_unlock(&clocksource_mutex);
+ return 0;
+}
+
+#else /* CONFIG_CLOCKSOURCE_WATCHDOG */
+
+static void clocksource_enqueue_watchdog(struct clocksource *cs)
{
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
}
+static inline void clocksource_dequeue_watchdog(struct clocksource *cs) { }
static inline void clocksource_resume_watchdog(void) { }
-#endif
+static inline int clocksource_watchdog_kthread(void *data) { return 0; }
+
+#endif /* CONFIG_CLOCKSOURCE_WATCHDOG */
/**
* clocksource_resume - resume the clocksource(s)
void clocksource_resume(void)
{
struct clocksource *cs;
- unsigned long flags;
- spin_lock_irqsave(&clocksource_lock, flags);
+ mutex_lock(&clocksource_mutex);
- list_for_each_entry(cs, &clocksource_list, list) {
+ list_for_each_entry(cs, &clocksource_list, list)
if (cs->resume)
cs->resume();
- }
clocksource_resume_watchdog();
- spin_unlock_irqrestore(&clocksource_lock, flags);
+ mutex_unlock(&clocksource_mutex);
}
/**
clocksource_resume_watchdog();
}
+#ifdef CONFIG_GENERIC_TIME
+
/**
- * clocksource_get_next - Returns the selected clocksource
+ * clocksource_select - Select the best clocksource available
+ *
+ * Private function. Must hold clocksource_mutex when called.
*
+ * Select the clocksource with the best rating, or the clocksource,
+ * which is selected by userspace override.
*/
-struct clocksource *clocksource_get_next(void)
+static void clocksource_select(void)
{
- unsigned long flags;
+ struct clocksource *best, *cs;
- spin_lock_irqsave(&clocksource_lock, flags);
- if (next_clocksource && finished_booting) {
- curr_clocksource = next_clocksource;
- next_clocksource = NULL;
+ if (!finished_booting || list_empty(&clocksource_list))
+ return;
+ /* First clocksource on the list has the best rating. */
+ best = list_first_entry(&clocksource_list, struct clocksource, list);
+ /* Check for the override clocksource. */
+ list_for_each_entry(cs, &clocksource_list, list) {
+ if (strcmp(cs->name, override_name) != 0)
+ continue;
+ /*
+ * Check to make sure we don't switch to a non-highres
+ * capable clocksource if the tick code is in oneshot
+ * mode (highres or nohz)
+ */
+ if (!(cs->flags & CLOCK_SOURCE_VALID_FOR_HRES) &&
+ tick_oneshot_mode_active()) {
+ /* Override clocksource cannot be used. */
+ printk(KERN_WARNING "Override clocksource %s is not "
+ "HRT compatible. Cannot switch while in "
+ "HRT/NOHZ mode\n", cs->name);
+ override_name[0] = 0;
+ } else
+ /* Override clocksource can be used. */
+ best = cs;
+ break;
+ }
+ if (curr_clocksource != best) {
+ printk(KERN_INFO "Switching to clocksource %s\n", best->name);
+ curr_clocksource = best;
+ timekeeping_notify(curr_clocksource);
}
- spin_unlock_irqrestore(&clocksource_lock, flags);
-
- return curr_clocksource;
}
-/**
- * select_clocksource - Selects the best registered clocksource.
- *
- * Private function. Must hold clocksource_lock when called.
+#else /* CONFIG_GENERIC_TIME */
+
+static inline void clocksource_select(void) { }
+
+#endif
+
+/*
+ * clocksource_done_booting - Called near the end of core bootup
*
- * Select the clocksource with the best rating, or the clocksource,
- * which is selected by userspace override.
+ * Hack to avoid lots of clocksource churn at boot time.
+ * We use fs_initcall because we want this to start before
+ * device_initcall but after subsys_initcall.
*/
-static struct clocksource *select_clocksource(void)
+static int __init clocksource_done_booting(void)
{
- struct clocksource *next;
-
- if (list_empty(&clocksource_list))
- return NULL;
-
- if (clocksource_override)
- next = clocksource_override;
- else
- next = list_entry(clocksource_list.next, struct clocksource,
- list);
+ finished_booting = 1;
- if (next == curr_clocksource)
- return NULL;
+ /*
+ * Run the watchdog first to eliminate unstable clock sources
+ */
+ clocksource_watchdog_kthread(NULL);
- return next;
+ mutex_lock(&clocksource_mutex);
+ clocksource_select();
+ mutex_unlock(&clocksource_mutex);
+ return 0;
}
+fs_initcall(clocksource_done_booting);
/*
* Enqueue the clocksource sorted by rating
*/
-static int clocksource_enqueue(struct clocksource *c)
+static void clocksource_enqueue(struct clocksource *cs)
{
- struct list_head *tmp, *entry = &clocksource_list;
+ struct list_head *entry = &clocksource_list;
+ struct clocksource *tmp;
- list_for_each(tmp, &clocksource_list) {
- struct clocksource *cs;
-
- cs = list_entry(tmp, struct clocksource, list);
- if (cs == c)
- return -EBUSY;
+ list_for_each_entry(tmp, &clocksource_list, list)
/* Keep track of the place, where to insert */
- if (cs->rating >= c->rating)
- entry = tmp;
- }
- list_add(&c->list, entry);
-
- if (strlen(c->name) == strlen(override_name) &&
- !strcmp(c->name, override_name))
- clocksource_override = c;
-
- return 0;
+ if (tmp->rating >= cs->rating)
+ entry = &tmp->list;
+ list_add(&cs->list, entry);
}
/**
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
-int clocksource_register(struct clocksource *c)
+int clocksource_register(struct clocksource *cs)
{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&clocksource_lock, flags);
- ret = clocksource_enqueue(c);
- if (!ret)
- next_clocksource = select_clocksource();
- spin_unlock_irqrestore(&clocksource_lock, flags);
- if (!ret)
- clocksource_check_watchdog(c);
- return ret;
+ mutex_lock(&clocksource_mutex);
+ clocksource_enqueue(cs);
+ clocksource_select();
+ clocksource_enqueue_watchdog(cs);
+ mutex_unlock(&clocksource_mutex);
+ return 0;
}
EXPORT_SYMBOL(clocksource_register);
+static void __clocksource_change_rating(struct clocksource *cs, int rating)
+{
+ list_del(&cs->list);
+ cs->rating = rating;
+ clocksource_enqueue(cs);
+ clocksource_select();
+}
+
/**
* clocksource_change_rating - Change the rating of a registered clocksource
- *
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
- unsigned long flags;
-
- spin_lock_irqsave(&clocksource_lock, flags);
- list_del(&cs->list);
- cs->rating = rating;
- clocksource_enqueue(cs);
- next_clocksource = select_clocksource();
- spin_unlock_irqrestore(&clocksource_lock, flags);
+ mutex_lock(&clocksource_mutex);
+ __clocksource_change_rating(cs, rating);
+ mutex_unlock(&clocksource_mutex);
}
+EXPORT_SYMBOL(clocksource_change_rating);
/**
* clocksource_unregister - remove a registered clocksource
*/
void clocksource_unregister(struct clocksource *cs)
{
- unsigned long flags;
-
- spin_lock_irqsave(&clocksource_lock, flags);
+ mutex_lock(&clocksource_mutex);
+ clocksource_dequeue_watchdog(cs);
list_del(&cs->list);
- if (clocksource_override == cs)
- clocksource_override = NULL;
- next_clocksource = select_clocksource();
- spin_unlock_irqrestore(&clocksource_lock, flags);
+ clocksource_select();
+ mutex_unlock(&clocksource_mutex);
}
+EXPORT_SYMBOL(clocksource_unregister);
#ifdef CONFIG_SYSFS
/**
{
ssize_t count = 0;
- spin_lock_irq(&clocksource_lock);
+ mutex_lock(&clocksource_mutex);
count = snprintf(buf, PAGE_SIZE, "%s\n", curr_clocksource->name);
- spin_unlock_irq(&clocksource_lock);
+ mutex_unlock(&clocksource_mutex);
return count;
}
struct sysdev_attribute *attr,
const char *buf, size_t count)
{
- struct clocksource *ovr = NULL;
size_t ret = count;
- int len;
/* strings from sysfs write are not 0 terminated! */
if (count >= sizeof(override_name))
if (buf[count-1] == '\n')
count--;
- spin_lock_irq(&clocksource_lock);
+ mutex_lock(&clocksource_mutex);
if (count > 0)
memcpy(override_name, buf, count);
override_name[count] = 0;
+ clocksource_select();
- len = strlen(override_name);
- if (len) {
- struct clocksource *cs;
-
- ovr = clocksource_override;
- /* try to select it: */
- list_for_each_entry(cs, &clocksource_list, list) {
- if (strlen(cs->name) == len &&
- !strcmp(cs->name, override_name))
- ovr = cs;
- }
- }
-
- /*
- * Check to make sure we don't switch to a non-highres capable
- * clocksource if the tick code is in oneshot mode (highres or nohz)
- */
- if (tick_oneshot_mode_active() && ovr &&
- !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
- printk(KERN_WARNING "%s clocksource is not HRT compatible. "
- "Cannot switch while in HRT/NOHZ mode\n", ovr->name);
- ovr = NULL;
- override_name[0] = 0;
- }
-
- /* Reselect, when the override name has changed */
- if (ovr != clocksource_override) {
- clocksource_override = ovr;
- next_clocksource = select_clocksource();
- }
-
- spin_unlock_irq(&clocksource_lock);
+ mutex_unlock(&clocksource_mutex);
return ret;
}
struct clocksource *src;
ssize_t count = 0;
- spin_lock_irq(&clocksource_lock);
+ mutex_lock(&clocksource_mutex);
list_for_each_entry(src, &clocksource_list, list) {
/*
* Don't show non-HRES clocksource if the tick code is
max((ssize_t)PAGE_SIZE - count, (ssize_t)0),
"%s ", src->name);
}
- spin_unlock_irq(&clocksource_lock);
+ mutex_unlock(&clocksource_mutex);
count += snprintf(buf + count,
max((ssize_t)PAGE_SIZE - count, (ssize_t)0), "\n");
*/
static int __init boot_override_clocksource(char* str)
{
- unsigned long flags;
- spin_lock_irqsave(&clocksource_lock, flags);
+ mutex_lock(&clocksource_mutex);
if (str)
strlcpy(override_name, str, sizeof(override_name));
- spin_unlock_irqrestore(&clocksource_lock, flags);
+ mutex_unlock(&clocksource_mutex);
return 1;
}
.read = jiffies_read,
.mask = 0xffffffff, /*32bits*/
.mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
- .mult_orig = NSEC_PER_JIFFY << JIFFIES_SHIFT,
.shift = JIFFIES_SHIFT,
};
}
core_initcall(init_jiffies_clocksource);
+
+struct clocksource * __init __weak clocksource_default_clock(void)
+{
+ return &clocksource_jiffies;
+}
case TIME_OK:
break;
case TIME_INS:
- xtime.tv_sec--;
- wall_to_monotonic.tv_sec++;
+ timekeeping_leap_insert(-1);
time_state = TIME_OOP;
printk(KERN_NOTICE
"Clock: inserting leap second 23:59:60 UTC\n");
res = HRTIMER_RESTART;
break;
case TIME_DEL:
- xtime.tv_sec++;
+ timekeeping_leap_insert(1);
time_tai--;
- wall_to_monotonic.tv_sec--;
time_state = TIME_WAIT;
printk(KERN_NOTICE
"Clock: deleting leap second 23:59:59 UTC\n");
time_state = TIME_OK;
break;
}
- update_vsyscall(&xtime, clock);
write_sequnlock(&xtime_lock);
#include <linux/jiffies.h>
#include <linux/time.h>
#include <linux/tick.h>
+#include <linux/stop_machine.h>
+
+/* Structure holding internal timekeeping values. */
+struct timekeeper {
+ /* Current clocksource used for timekeeping. */
+ struct clocksource *clock;
+ /* The shift value of the current clocksource. */
+ int shift;
+
+ /* Number of clock cycles in one NTP interval. */
+ cycle_t cycle_interval;
+ /* Number of clock shifted nano seconds in one NTP interval. */
+ u64 xtime_interval;
+ /* Raw nano seconds accumulated per NTP interval. */
+ u32 raw_interval;
+
+ /* Clock shifted nano seconds remainder not stored in xtime.tv_nsec. */
+ u64 xtime_nsec;
+ /* Difference between accumulated time and NTP time in ntp
+ * shifted nano seconds. */
+ s64 ntp_error;
+ /* Shift conversion between clock shifted nano seconds and
+ * ntp shifted nano seconds. */
+ int ntp_error_shift;
+ /* NTP adjusted clock multiplier */
+ u32 mult;
+};
+
+struct timekeeper timekeeper;
+
+/**
+ * timekeeper_setup_internals - Set up internals to use clocksource clock.
+ *
+ * @clock: Pointer to clocksource.
+ *
+ * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
+ * pair and interval request.
+ *
+ * Unless you're the timekeeping code, you should not be using this!
+ */
+static void timekeeper_setup_internals(struct clocksource *clock)
+{
+ cycle_t interval;
+ u64 tmp;
+
+ timekeeper.clock = clock;
+ clock->cycle_last = clock->read(clock);
+ /* Do the ns -> cycle conversion first, using original mult */
+ tmp = NTP_INTERVAL_LENGTH;
+ tmp <<= clock->shift;
+ tmp += clock->mult/2;
+ do_div(tmp, clock->mult);
+ if (tmp == 0)
+ tmp = 1;
+
+ interval = (cycle_t) tmp;
+ timekeeper.cycle_interval = interval;
+
+ /* Go back from cycles -> shifted ns */
+ timekeeper.xtime_interval = (u64) interval * clock->mult;
+ timekeeper.raw_interval =
+ ((u64) interval * clock->mult) >> clock->shift;
+
+ timekeeper.xtime_nsec = 0;
+ timekeeper.shift = clock->shift;
+
+ timekeeper.ntp_error = 0;
+ timekeeper.ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
+
+ /*
+ * The timekeeper keeps its own mult values for the currently
+ * active clocksource. These value will be adjusted via NTP
+ * to counteract clock drifting.
+ */
+ timekeeper.mult = clock->mult;
+}
+
+/* Timekeeper helper functions. */
+static inline s64 timekeeping_get_ns(void)
+{
+ cycle_t cycle_now, cycle_delta;
+ struct clocksource *clock;
+
+ /* read clocksource: */
+ clock = timekeeper.clock;
+ cycle_now = clock->read(clock);
+
+ /* calculate the delta since the last update_wall_time: */
+ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
+
+ /* return delta convert to nanoseconds using ntp adjusted mult. */
+ return clocksource_cyc2ns(cycle_delta, timekeeper.mult,
+ timekeeper.shift);
+}
+
+static inline s64 timekeeping_get_ns_raw(void)
+{
+ cycle_t cycle_now, cycle_delta;
+ struct clocksource *clock;
+
+ /* read clocksource: */
+ clock = timekeeper.clock;
+ cycle_now = clock->read(clock);
+
+ /* calculate the delta since the last update_wall_time: */
+ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
+
+ /* return delta convert to nanoseconds using ntp adjusted mult. */
+ return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+}
/*
* This read-write spinlock protects us from races in SMP while
*/
struct timespec xtime __attribute__ ((aligned (16)));
struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
-static unsigned long total_sleep_time; /* seconds */
+static struct timespec total_sleep_time;
+
+/*
+ * The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock.
+ */
+struct timespec raw_time;
/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;
timespec_add_ns(&xtime_cache, nsec);
}
-struct clocksource *clock;
-
+/* must hold xtime_lock */
+void timekeeping_leap_insert(int leapsecond)
+{
+ xtime.tv_sec += leapsecond;
+ wall_to_monotonic.tv_sec -= leapsecond;
+ update_vsyscall(&xtime, timekeeper.clock);
+}
#ifdef CONFIG_GENERIC_TIME
+
/**
- * clocksource_forward_now - update clock to the current time
+ * timekeeping_forward_now - update clock to the current time
*
* Forward the current clock to update its state since the last call to
* update_wall_time(). This is useful before significant clock changes,
* as it avoids having to deal with this time offset explicitly.
*/
-static void clocksource_forward_now(void)
+static void timekeeping_forward_now(void)
{
cycle_t cycle_now, cycle_delta;
+ struct clocksource *clock;
s64 nsec;
- cycle_now = clocksource_read(clock);
+ clock = timekeeper.clock;
+ cycle_now = clock->read(clock);
cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
clock->cycle_last = cycle_now;
- nsec = cyc2ns(clock, cycle_delta);
+ nsec = clocksource_cyc2ns(cycle_delta, timekeeper.mult,
+ timekeeper.shift);
/* If arch requires, add in gettimeoffset() */
nsec += arch_gettimeoffset();
timespec_add_ns(&xtime, nsec);
- nsec = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
- clock->raw_time.tv_nsec += nsec;
+ nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+ timespec_add_ns(&raw_time, nsec);
}
/**
*/
void getnstimeofday(struct timespec *ts)
{
- cycle_t cycle_now, cycle_delta;
unsigned long seq;
s64 nsecs;
seq = read_seqbegin(&xtime_lock);
*ts = xtime;
-
- /* read clocksource: */
- cycle_now = clocksource_read(clock);
-
- /* calculate the delta since the last update_wall_time: */
- cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
- /* convert to nanoseconds: */
- nsecs = cyc2ns(clock, cycle_delta);
+ nsecs = timekeeping_get_ns();
/* If arch requires, add in gettimeoffset() */
nsecs += arch_gettimeoffset();
EXPORT_SYMBOL(getnstimeofday);
+ktime_t ktime_get(void)
+{
+ unsigned int seq;
+ s64 secs, nsecs;
+
+ WARN_ON(timekeeping_suspended);
+
+ do {
+ seq = read_seqbegin(&xtime_lock);
+ secs = xtime.tv_sec + wall_to_monotonic.tv_sec;
+ nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec;
+ nsecs += timekeeping_get_ns();
+
+ } while (read_seqretry(&xtime_lock, seq));
+ /*
+ * Use ktime_set/ktime_add_ns to create a proper ktime on
+ * 32-bit architectures without CONFIG_KTIME_SCALAR.
+ */
+ return ktime_add_ns(ktime_set(secs, 0), nsecs);
+}
+EXPORT_SYMBOL_GPL(ktime_get);
+
+/**
+ * ktime_get_ts - get the monotonic clock in timespec format
+ * @ts: pointer to timespec variable
+ *
+ * The function calculates the monotonic clock from the realtime
+ * clock and the wall_to_monotonic offset and stores the result
+ * in normalized timespec format in the variable pointed to by @ts.
+ */
+void ktime_get_ts(struct timespec *ts)
+{
+ struct timespec tomono;
+ unsigned int seq;
+ s64 nsecs;
+
+ WARN_ON(timekeeping_suspended);
+
+ do {
+ seq = read_seqbegin(&xtime_lock);
+ *ts = xtime;
+ tomono = wall_to_monotonic;
+ nsecs = timekeeping_get_ns();
+
+ } while (read_seqretry(&xtime_lock, seq));
+
+ set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
+ ts->tv_nsec + tomono.tv_nsec + nsecs);
+}
+EXPORT_SYMBOL_GPL(ktime_get_ts);
+
/**
* do_gettimeofday - Returns the time of day in a timeval
* @tv: pointer to the timeval to be set
write_seqlock_irqsave(&xtime_lock, flags);
- clocksource_forward_now();
+ timekeeping_forward_now();
ts_delta.tv_sec = tv->tv_sec - xtime.tv_sec;
ts_delta.tv_nsec = tv->tv_nsec - xtime.tv_nsec;
update_xtime_cache(0);
- clock->error = 0;
+ timekeeper.ntp_error = 0;
ntp_clear();
- update_vsyscall(&xtime, clock);
+ update_vsyscall(&xtime, timekeeper.clock);
write_sequnlock_irqrestore(&xtime_lock, flags);
*
* Accumulates current time interval and initializes new clocksource
*/
-static void change_clocksource(void)
+static int change_clocksource(void *data)
{
struct clocksource *new, *old;
- new = clocksource_get_next();
+ new = (struct clocksource *) data;
+
+ timekeeping_forward_now();
+ if (!new->enable || new->enable(new) == 0) {
+ old = timekeeper.clock;
+ timekeeper_setup_internals(new);
+ if (old->disable)
+ old->disable(old);
+ }
+ return 0;
+}
- if (clock == new)
+/**
+ * timekeeping_notify - Install a new clock source
+ * @clock: pointer to the clock source
+ *
+ * This function is called from clocksource.c after a new, better clock
+ * source has been registered. The caller holds the clocksource_mutex.
+ */
+void timekeeping_notify(struct clocksource *clock)
+{
+ if (timekeeper.clock == clock)
return;
+ stop_machine(change_clocksource, clock, NULL);
+ tick_clock_notify();
+}
- clocksource_forward_now();
+#else /* GENERIC_TIME */
- if (clocksource_enable(new))
- return;
+static inline void timekeeping_forward_now(void) { }
- new->raw_time = clock->raw_time;
- old = clock;
- clock = new;
- clocksource_disable(old);
+/**
+ * ktime_get - get the monotonic time in ktime_t format
+ *
+ * returns the time in ktime_t format
+ */
+ktime_t ktime_get(void)
+{
+ struct timespec now;
- clock->cycle_last = 0;
- clock->cycle_last = clocksource_read(clock);
- clock->error = 0;
- clock->xtime_nsec = 0;
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
+ ktime_get_ts(&now);
- tick_clock_notify();
+ return timespec_to_ktime(now);
+}
+EXPORT_SYMBOL_GPL(ktime_get);
- /*
- * We're holding xtime lock and waking up klogd would deadlock
- * us on enqueue. So no printing!
- printk(KERN_INFO "Time: %s clocksource has been installed.\n",
- clock->name);
- */
+/**
+ * ktime_get_ts - get the monotonic clock in timespec format
+ * @ts: pointer to timespec variable
+ *
+ * The function calculates the monotonic clock from the realtime
+ * clock and the wall_to_monotonic offset and stores the result
+ * in normalized timespec format in the variable pointed to by @ts.
+ */
+void ktime_get_ts(struct timespec *ts)
+{
+ struct timespec tomono;
+ unsigned long seq;
+
+ do {
+ seq = read_seqbegin(&xtime_lock);
+ getnstimeofday(ts);
+ tomono = wall_to_monotonic;
+
+ } while (read_seqretry(&xtime_lock, seq));
+
+ set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
+ ts->tv_nsec + tomono.tv_nsec);
}
-#else
-static inline void clocksource_forward_now(void) { }
-static inline void change_clocksource(void) { }
-#endif
+EXPORT_SYMBOL_GPL(ktime_get_ts);
+
+#endif /* !GENERIC_TIME */
+
+/**
+ * ktime_get_real - get the real (wall-) time in ktime_t format
+ *
+ * returns the time in ktime_t format
+ */
+ktime_t ktime_get_real(void)
+{
+ struct timespec now;
+
+ getnstimeofday(&now);
+
+ return timespec_to_ktime(now);
+}
+EXPORT_SYMBOL_GPL(ktime_get_real);
/**
* getrawmonotonic - Returns the raw monotonic time in a timespec
{
unsigned long seq;
s64 nsecs;
- cycle_t cycle_now, cycle_delta;
do {
seq = read_seqbegin(&xtime_lock);
-
- /* read clocksource: */
- cycle_now = clocksource_read(clock);
-
- /* calculate the delta since the last update_wall_time: */
- cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
- /* convert to nanoseconds: */
- nsecs = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
-
- *ts = clock->raw_time;
+ nsecs = timekeeping_get_ns_raw();
+ *ts = raw_time;
} while (read_seqretry(&xtime_lock, seq));
do {
seq = read_seqbegin(&xtime_lock);
- ret = clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
+ ret = timekeeper.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
} while (read_seqretry(&xtime_lock, seq));
}
/**
- * read_persistent_clock - Return time in seconds from the persistent clock.
+ * read_persistent_clock - Return time from the persistent clock.
*
* Weak dummy function for arches that do not yet support it.
- * Returns seconds from epoch using the battery backed persistent clock.
- * Returns zero if unsupported.
+ * Reads the time from the battery backed persistent clock.
+ * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
*
* XXX - Do be sure to remove it once all arches implement it.
*/
-unsigned long __attribute__((weak)) read_persistent_clock(void)
+void __attribute__((weak)) read_persistent_clock(struct timespec *ts)
{
- return 0;
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
+}
+
+/**
+ * read_boot_clock - Return time of the system start.
+ *
+ * Weak dummy function for arches that do not yet support it.
+ * Function to read the exact time the system has been started.
+ * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
+ *
+ * XXX - Do be sure to remove it once all arches implement it.
+ */
+void __attribute__((weak)) read_boot_clock(struct timespec *ts)
+{
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
}
/*
*/
void __init timekeeping_init(void)
{
+ struct clocksource *clock;
unsigned long flags;
- unsigned long sec = read_persistent_clock();
+ struct timespec now, boot;
+
+ read_persistent_clock(&now);
+ read_boot_clock(&boot);
write_seqlock_irqsave(&xtime_lock, flags);
ntp_init();
- clock = clocksource_get_next();
- clocksource_enable(clock);
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
- clock->cycle_last = clocksource_read(clock);
-
- xtime.tv_sec = sec;
- xtime.tv_nsec = 0;
+ clock = clocksource_default_clock();
+ if (clock->enable)
+ clock->enable(clock);
+ timekeeper_setup_internals(clock);
+
+ xtime.tv_sec = now.tv_sec;
+ xtime.tv_nsec = now.tv_nsec;
+ raw_time.tv_sec = 0;
+ raw_time.tv_nsec = 0;
+ if (boot.tv_sec == 0 && boot.tv_nsec == 0) {
+ boot.tv_sec = xtime.tv_sec;
+ boot.tv_nsec = xtime.tv_nsec;
+ }
set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ -boot.tv_sec, -boot.tv_nsec);
update_xtime_cache(0);
- total_sleep_time = 0;
+ total_sleep_time.tv_sec = 0;
+ total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&xtime_lock, flags);
}
/* time in seconds when suspend began */
-static unsigned long timekeeping_suspend_time;
+static struct timespec timekeeping_suspend_time;
/**
* timekeeping_resume - Resumes the generic timekeeping subsystem.
static int timekeeping_resume(struct sys_device *dev)
{
unsigned long flags;
- unsigned long now = read_persistent_clock();
+ struct timespec ts;
+
+ read_persistent_clock(&ts);
clocksource_resume();
write_seqlock_irqsave(&xtime_lock, flags);
- if (now && (now > timekeeping_suspend_time)) {
- unsigned long sleep_length = now - timekeeping_suspend_time;
-
- xtime.tv_sec += sleep_length;
- wall_to_monotonic.tv_sec -= sleep_length;
- total_sleep_time += sleep_length;
+ if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
+ ts = timespec_sub(ts, timekeeping_suspend_time);
+ xtime = timespec_add_safe(xtime, ts);
+ wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
+ total_sleep_time = timespec_add_safe(total_sleep_time, ts);
}
update_xtime_cache(0);
/* re-base the last cycle value */
- clock->cycle_last = 0;
- clock->cycle_last = clocksource_read(clock);
- clock->error = 0;
+ timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
+ timekeeper.ntp_error = 0;
timekeeping_suspended = 0;
write_sequnlock_irqrestore(&xtime_lock, flags);
{
unsigned long flags;
- timekeeping_suspend_time = read_persistent_clock();
+ read_persistent_clock(&timekeeping_suspend_time);
write_seqlock_irqsave(&xtime_lock, flags);
- clocksource_forward_now();
+ timekeeping_forward_now();
timekeeping_suspended = 1;
write_sequnlock_irqrestore(&xtime_lock, flags);
* If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
+static __always_inline int timekeeping_bigadjust(s64 error, s64 *interval,
s64 *offset)
{
s64 tick_error, i;
* here. This is tuned so that an error of about 1 msec is adjusted
* within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
- error2 = clock->error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = timekeeper.ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
error2 = abs(error2);
for (look_ahead = 0; error2 > 0; look_ahead++)
error2 >>= 2;
* Now calculate the error in (1 << look_ahead) ticks, but first
* remove the single look ahead already included in the error.
*/
- tick_error = tick_length >> (NTP_SCALE_SHIFT - clock->shift + 1);
- tick_error -= clock->xtime_interval >> 1;
+ tick_error = tick_length >> (timekeeper.ntp_error_shift + 1);
+ tick_error -= timekeeper.xtime_interval >> 1;
error = ((error - tick_error) >> look_ahead) + tick_error;
/* Finally calculate the adjustment shift value. */
* this is optimized for the most common adjustments of -1,0,1,
* for other values we can do a bit more work.
*/
-static void clocksource_adjust(s64 offset)
+static void timekeeping_adjust(s64 offset)
{
- s64 error, interval = clock->cycle_interval;
+ s64 error, interval = timekeeper.cycle_interval;
int adj;
- error = clock->error >> (NTP_SCALE_SHIFT - clock->shift - 1);
+ error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1);
if (error > interval) {
error >>= 2;
if (likely(error <= interval))
adj = 1;
else
- adj = clocksource_bigadjust(error, &interval, &offset);
+ adj = timekeeping_bigadjust(error, &interval, &offset);
} else if (error < -interval) {
error >>= 2;
if (likely(error >= -interval)) {
interval = -interval;
offset = -offset;
} else
- adj = clocksource_bigadjust(error, &interval, &offset);
+ adj = timekeeping_bigadjust(error, &interval, &offset);
} else
return;
- clock->mult += adj;
- clock->xtime_interval += interval;
- clock->xtime_nsec -= offset;
- clock->error -= (interval - offset) <<
- (NTP_SCALE_SHIFT - clock->shift);
+ timekeeper.mult += adj;
+ timekeeper.xtime_interval += interval;
+ timekeeper.xtime_nsec -= offset;
+ timekeeper.ntp_error -= (interval - offset) <<
+ timekeeper.ntp_error_shift;
}
/**
*/
void update_wall_time(void)
{
+ struct clocksource *clock;
cycle_t offset;
+ u64 nsecs;
/* Make sure we're fully resumed: */
if (unlikely(timekeeping_suspended))
return;
+ clock = timekeeper.clock;
#ifdef CONFIG_GENERIC_TIME
- offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
+ offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
#else
- offset = clock->cycle_interval;
+ offset = timekeeper.cycle_interval;
#endif
- clock->xtime_nsec = (s64)xtime.tv_nsec << clock->shift;
+ timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
/* normally this loop will run just once, however in the
* case of lost or late ticks, it will accumulate correctly.
*/
- while (offset >= clock->cycle_interval) {
+ while (offset >= timekeeper.cycle_interval) {
+ u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
+
/* accumulate one interval */
- offset -= clock->cycle_interval;
- clock->cycle_last += clock->cycle_interval;
+ offset -= timekeeper.cycle_interval;
+ clock->cycle_last += timekeeper.cycle_interval;
- clock->xtime_nsec += clock->xtime_interval;
- if (clock->xtime_nsec >= (u64)NSEC_PER_SEC << clock->shift) {
- clock->xtime_nsec -= (u64)NSEC_PER_SEC << clock->shift;
+ timekeeper.xtime_nsec += timekeeper.xtime_interval;
+ if (timekeeper.xtime_nsec >= nsecps) {
+ timekeeper.xtime_nsec -= nsecps;
xtime.tv_sec++;
second_overflow();
}
- clock->raw_time.tv_nsec += clock->raw_interval;
- if (clock->raw_time.tv_nsec >= NSEC_PER_SEC) {
- clock->raw_time.tv_nsec -= NSEC_PER_SEC;
- clock->raw_time.tv_sec++;
+ raw_time.tv_nsec += timekeeper.raw_interval;
+ if (raw_time.tv_nsec >= NSEC_PER_SEC) {
+ raw_time.tv_nsec -= NSEC_PER_SEC;
+ raw_time.tv_sec++;
}
/* accumulate error between NTP and clock interval */
- clock->error += tick_length;
- clock->error -= clock->xtime_interval << (NTP_SCALE_SHIFT - clock->shift);
+ timekeeper.ntp_error += tick_length;
+ timekeeper.ntp_error -= timekeeper.xtime_interval <<
+ timekeeper.ntp_error_shift;
}
/* correct the clock when NTP error is too big */
- clocksource_adjust(offset);
+ timekeeping_adjust(offset);
/*
* Since in the loop above, we accumulate any amount of time
* in xtime_nsec over a second into xtime.tv_sec, its possible for
* xtime_nsec to be fairly small after the loop. Further, if we're
- * slightly speeding the clocksource up in clocksource_adjust(),
+ * slightly speeding the clocksource up in timekeeping_adjust(),
* its possible the required corrective factor to xtime_nsec could
* cause it to underflow.
*
* We'll correct this error next time through this function, when
* xtime_nsec is not as small.
*/
- if (unlikely((s64)clock->xtime_nsec < 0)) {
- s64 neg = -(s64)clock->xtime_nsec;
- clock->xtime_nsec = 0;
- clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+ if (unlikely((s64)timekeeper.xtime_nsec < 0)) {
+ s64 neg = -(s64)timekeeper.xtime_nsec;
+ timekeeper.xtime_nsec = 0;
+ timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
}
/* store full nanoseconds into xtime after rounding it up and
* add the remainder to the error difference.
*/
- xtime.tv_nsec = ((s64)clock->xtime_nsec >> clock->shift) + 1;
- clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
- clock->error += clock->xtime_nsec << (NTP_SCALE_SHIFT - clock->shift);
+ xtime.tv_nsec = ((s64) timekeeper.xtime_nsec >> timekeeper.shift) + 1;
+ timekeeper.xtime_nsec -= (s64) xtime.tv_nsec << timekeeper.shift;
+ timekeeper.ntp_error += timekeeper.xtime_nsec <<
+ timekeeper.ntp_error_shift;
- update_xtime_cache(cyc2ns(clock, offset));
+ nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift);
+ update_xtime_cache(nsecs);
/* check to see if there is a new clocksource to use */
- change_clocksource();
- update_vsyscall(&xtime, clock);
+ update_vsyscall(&xtime, timekeeper.clock);
}
/**
*/
void getboottime(struct timespec *ts)
{
- set_normalized_timespec(ts,
- - (wall_to_monotonic.tv_sec + total_sleep_time),
- - wall_to_monotonic.tv_nsec);
+ struct timespec boottime = {
+ .tv_sec = wall_to_monotonic.tv_sec + total_sleep_time.tv_sec,
+ .tv_nsec = wall_to_monotonic.tv_nsec + total_sleep_time.tv_nsec
+ };
+
+ set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
}
/**
*/
void monotonic_to_bootbased(struct timespec *ts)
{
- ts->tv_sec += total_sleep_time;
+ *ts = timespec_add_safe(*ts, total_sleep_time);
}
unsigned long get_seconds(void)
}
EXPORT_SYMBOL(get_seconds);
+struct timespec __current_kernel_time(void)
+{
+ return xtime_cache;
+}
struct timespec current_kernel_time(void)
{
return now;
}
EXPORT_SYMBOL(current_kernel_time);
+
+struct timespec get_monotonic_coarse(void)
+{
+ struct timespec now, mono;
+ unsigned long seq;
+
+ do {
+ seq = read_seqbegin(&xtime_lock);
+
+ now = xtime_cache;
+ mono = wall_to_monotonic;
+ } while (read_seqretry(&xtime_lock, seq));
+
+ set_normalized_timespec(&now, now.tv_sec + mono.tv_sec,
+ now.tv_nsec + mono.tv_nsec);
+ return now;
+}
spinlock_t lock;
struct timer_list *running_timer;
unsigned long timer_jiffies;
+ unsigned long next_timer;
struct tvec_root tv1;
struct tvec tv2;
struct tvec tv3;
if (timer_pending(timer)) {
detach_timer(timer, 0);
+ if (timer->expires == base->next_timer &&
+ !tbase_get_deferrable(timer->base))
+ base->next_timer = base->timer_jiffies;
ret = 1;
} else {
if (pending_only)
}
timer->expires = expires;
+ if (time_before(timer->expires, base->next_timer) &&
+ !tbase_get_deferrable(timer->base))
+ base->next_timer = timer->expires;
internal_add_timer(base, timer);
out_unlock:
spin_lock_irqsave(&base->lock, flags);
timer_set_base(timer, base);
debug_timer_activate(timer);
+ if (time_before(timer->expires, base->next_timer) &&
+ !tbase_get_deferrable(timer->base))
+ base->next_timer = timer->expires;
internal_add_timer(base, timer);
/*
* Check whether the other CPU is idle and needs to be
base = lock_timer_base(timer, &flags);
if (timer_pending(timer)) {
detach_timer(timer, 1);
+ if (timer->expires == base->next_timer &&
+ !tbase_get_deferrable(timer->base))
+ base->next_timer = base->timer_jiffies;
ret = 1;
}
spin_unlock_irqrestore(&base->lock, flags);
ret = 0;
if (timer_pending(timer)) {
detach_timer(timer, 1);
+ if (timer->expires == base->next_timer &&
+ !tbase_get_deferrable(timer->base))
+ base->next_timer = base->timer_jiffies;
ret = 1;
}
out:
#ifdef CONFIG_NO_HZ
/*
* Find out when the next timer event is due to happen. This
- * is used on S/390 to stop all activity when a cpus is idle.
- * This functions needs to be called disabled.
+ * is used on S/390 to stop all activity when a CPU is idle.
+ * This function needs to be called with interrupts disabled.
*/
static unsigned long __next_timer_interrupt(struct tvec_base *base)
{
unsigned long expires;
spin_lock(&base->lock);
- expires = __next_timer_interrupt(base);
+ if (time_before_eq(base->next_timer, base->timer_jiffies))
+ base->next_timer = __next_timer_interrupt(base);
+ expires = base->next_timer;
spin_unlock(&base->lock);
if (time_before_eq(expires, now))
INIT_LIST_HEAD(base->tv1.vec + j);
base->timer_jiffies = jiffies;
+ base->next_timer = base->timer_jiffies;
return 0;
}
timer = list_first_entry(head, struct timer_list, entry);
detach_timer(timer, 0);
timer_set_base(timer, new_base);
+ if (time_before(timer->expires, new_base->next_timer) &&
+ !tbase_get_deferrable(timer->base))
+ new_base->next_timer = timer->expires;
internal_add_timer(new_base, timer);
}
}