bnx2x: allow adding VLANs while interface is down
authorMichal Schmidt <mschmidt@redhat.com>
Fri, 3 Jun 2016 13:32:18 +0000 (15:32 +0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 6 Jun 2016 03:11:39 +0000 (23:11 -0400)
Since implementing VLAN filtering in commit 05cc5a39ddb74
("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while
the interface is down:

  # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10
  RTNETLINK answers: Bad address

and in dmesg (with bnx2x.debug=0x20):
  bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN
  configuration the interface is down

Other drivers have no problem with this.
Fix this peculiar behavior in the following way:
 - Accept requests to add/kill VID regardless of the device state.
   Maintain the requested list of VIDs in the bp->vlan_reg list.
 - If the device is up, try to configure the VID list into the hardware.
   If we run out of VLAN credits or encounter a failure configuring an
   entry, fall back to accepting all VLANs.
   If we successfully configure all entries from the list, turn the
   fallback off.
 - Use the same code for reconfiguring VLANs during NIC load.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

index c5fe915..a59d55e 100644 (file)
@@ -12895,52 +12895,71 @@ static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add)
        return rc;
 }
 
-int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
+static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp)
 {
        struct bnx2x_vlan_entry *vlan;
        int rc = 0;
 
-       if (!bp->vlan_cnt) {
-               DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n");
-               return 0;
-       }
-
+       /* Configure all non-configured entries */
        list_for_each_entry(vlan, &bp->vlan_reg, link) {
-               /* Prepare for cleanup in case of errors */
-               if (rc) {
-                       vlan->hw = false;
-                       continue;
-               }
-
-               if (!vlan->hw)
+               if (vlan->hw)
                        continue;
 
-               DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid);
+               if (bp->vlan_cnt >= bp->vlan_credit)
+                       return -ENOBUFS;
 
                rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
                if (rc) {
-                       BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid);
-                       vlan->hw = false;
-                       rc = -EINVAL;
-                       continue;
+                       BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid);
+                       return rc;
                }
+
+               DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid);
+               vlan->hw = true;
+               bp->vlan_cnt++;
        }
 
-       return rc;
+       return 0;
+}
+
+static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
+{
+       bool need_accept_any_vlan;
+
+       need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp);
+
+       if (bp->accept_any_vlan != need_accept_any_vlan) {
+               bp->accept_any_vlan = need_accept_any_vlan;
+               DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n",
+                  bp->accept_any_vlan ? "raised" : "cleared");
+               if (set_rx_mode) {
+                       if (IS_PF(bp))
+                               bnx2x_set_rx_mode_inner(bp);
+                       else
+                               bnx2x_vfpf_storm_rx_mode(bp);
+               }
+       }
+}
+
+int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
+{
+       struct bnx2x_vlan_entry *vlan;
+
+       /* The hw forgot all entries after reload */
+       list_for_each_entry(vlan, &bp->vlan_reg, link)
+               vlan->hw = false;
+       bp->vlan_cnt = 0;
+
+       /* Don't set rx mode here. Our caller will do it. */
+       bnx2x_vlan_configure(bp, false);
+
+       return 0;
 }
 
 static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
 {
        struct bnx2x *bp = netdev_priv(dev);
        struct bnx2x_vlan_entry *vlan;
-       bool hw = false;
-       int rc = 0;
-
-       if (!netif_running(bp->dev)) {
-               DP(NETIF_MSG_IFUP,
-                  "Ignoring VLAN configuration the interface is down\n");
-               return -EFAULT;
-       }
 
        DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid);
 
@@ -12948,93 +12967,47 @@ static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
        if (!vlan)
                return -ENOMEM;
 
-       bp->vlan_cnt++;
-       if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) {
-               DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n");
-               bp->accept_any_vlan = true;
-               if (IS_PF(bp))
-                       bnx2x_set_rx_mode_inner(bp);
-               else
-                       bnx2x_vfpf_storm_rx_mode(bp);
-       } else if (bp->vlan_cnt <= bp->vlan_credit) {
-               rc = __bnx2x_vlan_configure_vid(bp, vid, true);
-               hw = true;
-       }
-
        vlan->vid = vid;
-       vlan->hw = hw;
+       vlan->hw = false;
+       list_add_tail(&vlan->link, &bp->vlan_reg);
 
-       if (!rc) {
-               list_add(&vlan->link, &bp->vlan_reg);
-       } else {
-               bp->vlan_cnt--;
-               kfree(vlan);
-       }
-
-       DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc);
+       if (netif_running(dev))
+               bnx2x_vlan_configure(bp, true);
 
-       return rc;
+       return 0;
 }
 
 static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
 {
        struct bnx2x *bp = netdev_priv(dev);
        struct bnx2x_vlan_entry *vlan;
+       bool found = false;
        int rc = 0;
 
-       if (!netif_running(bp->dev)) {
-               DP(NETIF_MSG_IFUP,
-                  "Ignoring VLAN configuration the interface is down\n");
-               return -EFAULT;
-       }
-
        DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid);
 
-       if (!bp->vlan_cnt) {
-               BNX2X_ERR("Unable to kill VLAN %d\n", vid);
-               return -EINVAL;
-       }
-
        list_for_each_entry(vlan, &bp->vlan_reg, link)
-               if (vlan->vid == vid)
+               if (vlan->vid == vid) {
+                       found = true;
                        break;
+               }
 
-       if (vlan->vid != vid) {
+       if (!found) {
                BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid);
                return -EINVAL;
        }
 
-       if (vlan->hw)
+       if (netif_running(dev) && vlan->hw) {
                rc = __bnx2x_vlan_configure_vid(bp, vid, false);
+               DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid);
+               bp->vlan_cnt--;
+       }
 
        list_del(&vlan->link);
        kfree(vlan);
 
-       bp->vlan_cnt--;
-
-       if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) {
-               /* Configure all non-configured entries */
-               list_for_each_entry(vlan, &bp->vlan_reg, link) {
-                       if (vlan->hw)
-                               continue;
-
-                       rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
-                       if (rc) {
-                               BNX2X_ERR("Unable to config VLAN %d\n",
-                                         vlan->vid);
-                               continue;
-                       }
-                       DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n",
-                          vlan->vid);
-                       vlan->hw = true;
-               }
-               DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n");
-               bp->accept_any_vlan = false;
-               if (IS_PF(bp))
-                       bnx2x_set_rx_mode_inner(bp);
-               else
-                       bnx2x_vfpf_storm_rx_mode(bp);
-       }
+       if (netif_running(dev))
+               bnx2x_vlan_configure(bp, true);
 
        DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc);