+2002-01-06 Andrew Cagney <ac131313@redhat.com>
+
+ Fix PR gdb/66.
+ * gdb.base/structs.exp: Replace skip for a29k with skip for
+ gdb,cannot_call_functions.
+ * gdb.base/call-ar-st.exp: Remove references to a29k in comments.
+ * gdb.base/callfuncs.exp: Ditto.
+ * gdb.base/call-rt-st.exp: Ditto.
+ * gdb.base/call-strs.exp: Ditto.
+ * gdb.base/callfwmall.exp: Ditto.
+ * gdb.base/scope.exp: Obsolete xfail a29k.
+ * gdb.c++/misc.exp: Ditto.
+ * gdb.c++/cplusfuncs.exp: Ditto.
+ * gdb.base/ptype.exp: Ditto.
+ * gdb.base/printcmds.exp: Ditto.
+ * gdb.base/opaque.exp: Ditto.
+ * gdb.base/list.exp: Ditto.
+ * gdb.base/funcargs.exp: Ditto.
+ * gdb.base/default.exp: Ditto.
+
2002-01-04 Michael Snyder <msnyder@redhat.com>
* gdb.base/info-proc.exp: New file, test for "info proc" cmd.
return -1;
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't call functions, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
return -1;
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't do function calls, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't call functions, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
set prototypes 0
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't do function calls, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't call functions, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
timeout { fail "(timeout) attach" }
}
-# FIXME: attach kills the udi connection
-if { [istarget "a29k-*-udi"] } {
- gdb_exit
- gdb_start
-}
+# OBSOLETE # FIXME: attach kills the udi connection
+# OBSOLETE if { [istarget "a29k-*-udi"] } {
+# OBSOLETE gdb_exit
+# OBSOLETE gdb_start
+# OBSOLETE }
if ![target_info exists use_gdb_stub] {
gdb_test "break" "No default breakpoint address now." "break"
}
- setup_xfail "mips-idt-*" "a29k-*-udi"
+ setup_xfail "mips-idt-*"
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "backtrace" "No stack."
# ba and bac are no longer unique command prefixes. So these tests
# GDB needs to be fixed to map unique alias here for ba bac.
#
foreach i "bt ba bac" {
- setup_xfail "mips-idt-*" "a29k-*-udi"
+ setup_xfail "mips-idt-*"
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
}
} else {
# This works on the MIPS IDT board, but confuses future tests.
if ![istarget "mips-idt-*"] then {
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "continue" "The program is not being run." "continue"
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
}
-# FIXME: continue kills the udi connection
-if [istarget "a29k-*-udi"] then {
- gdb_exit
- gdb_start
-}
+# OBSOLETE # FIXME: continue kills the udi connection
+# OBSOLETE if [istarget "a29k-*-udi"] then {
+# OBSOLETE gdb_exit
+# OBSOLETE gdb_start
+# OBSOLETE }
#test call
gdb_test "call" "The history is empty..*" "call"
#test detach
gdb_test "detach" "" "detach"
-# FIXME: continue kills the udi connection
-if [istarget "a29k-*-udi"] then {
- gdb_exit
- gdb_start
-}
+# OBSOLETE # FIXME: continue kills the udi connection
+# OBSOLETE if [istarget "a29k-*-udi"] then {
+# OBSOLETE gdb_exit
+# OBSOLETE gdb_start
+# OBSOLETE }
if [istarget "h8300-*-hms"] then {
gdb_exit
gdb_start
}
#test frame "f" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "f" "No stack." "frame \"f\" abbreviation"
#test frame
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "frame" "No stack." "frame"
#test fg
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "fg" "The program is not being run." "fg"
# FIXME: fg kills the udi connection
#test file
}
#test finish
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "finish" "The program is not running." "finish"
#test forward-search
# The message here comes from the regexp library, not gdb, and so can
#test info address
gdb_test "info address" "Argument required." "info address"
#test info all-registers
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info all-registers" "The program has no registers now." "info all-registers"
#test info args
gdb_test "info args" "No frame selected." "info args"
#test info locals
gdb_test "info locals" "No frame selected." "info locals"
#test info program
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info program" "The program being debugged is not being run." "info program"
#test info registers
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info registers" "The program has no registers now." "info registers"
#test info stack "s" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
#test info stack
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info stack" "No stack." "info stack"
#test info set
# FIXME -- needs to match the entire output
#test inspect
gdb_test "inspect" "The history is empty." "inspect"
#test jump
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "jump" "The program is not being run." "jump"
#test kill
gdb_test "kill" "The program is not being run." "kill"
# to deduce the filename from the exec file.
gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
#test next "n" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
#test next
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "next" "The program is not being run." "next"
#test nexti "ni" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
#test nexti
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "nexti" "The program is not being run." "nexti"
#test output
gdb_test "output" "Argument required .expression to compute.*" "output"
gdb_test "rbreak" "" "rbreak"
#test return
-# The middle case accommodates the a29k, where doing the "ni" above causes
-# an initial stack to be created.
+# The middle case accomodated the OBSOLETE a29k, where doing the "ni"
+# above causes an initial stack to be created.
gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
#test reverse-search
gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
#test step "s" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
#test step
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #1"
#test search
gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
#test show
gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename: *The filename in which to record the command history is .*\[\r\n\]+history save: *Saving of the history record on exit is on..*\[\r\n\]+history size: *The size of the command history is.*\[\r\n\]+listsize: *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements: *Limit on string chars or array elements to print is 200..*" "show"
#test stepi "si" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
#test stepi
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "stepi" "The program is not being run." "stepi"
#test signal
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "signal" "The program is not being run." "signal"
#test source
gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
#test step "s" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
#test step
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #2"
#test symbol-file
gdb_test "symbol-file" "" "symbol-file"
#test tty
gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
#test until "u" abbreviation
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "u" "The program is not running." "until \"u\" abbreviation"
#test until
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "until" "The program is not running." "until"
#test undisplay
# FIXME -- need to dump full output to detailed log
#test whatis
gdb_test "whatis" "The history is empty." "whatis"
#test where
-setup_xfail "a29k-*-udi"
+# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "where" "No stack." "where"
#test x
#The case in which it prints a number is for vxgdb.
gdb_breakpoint call0e
# Run; should stop at call0a and print actual arguments.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
gdb_run_cmd
gdb_expect {
gdb_breakpoint call1e;
# Run; should stop at call1a and print actual arguments.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
gdb_run_cmd
gdb_expect {
# Run; should stop at call2a and print actual arguments.
setup_xfail "i960-*-*" 1813
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "mips-sgi-irix5*" }
# The debug info. for "f" is not correct. It's a known bug.
if {$hp_cc_compiler} {setup_xfail hppa2.0w-*-*}
# Run; should stop at call3a and print actual arguments.
# Try dereferencing the arguments.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call3a \\(cp=$hex \"a.*\", sp=$hex, ip=$hex, lp=$hex\\) .*$gdb_prompt $" { pass "run to call3a" }
# Run; should stop at call4a and print actual arguments.
# Try dereferencing the arguments.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call4a \\(stp=$hex\\) .*$gdb_prompt $" {
# Run; should stop at call5a and print actual arguments.
# Try dereferencing the arguments.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call5a \\(st=\{s1 = 101, s2 = 102\}\\) .*$gdb_prompt $" {
# Run; should stop at call6a and print actual arguments.
# Print backtrace.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint $decimal, call6a .*$gdb_prompt $" { pass "run to call6a" }
# Run; should stop at call7a and print actual arguments.
# Print backtrace.
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint $decimal, call7a .*$gdb_prompt $" {
}
if ![istarget sparclet-*-*] {
- # The a29k fails all of these tests, perhaps because the prologue
- # code is broken.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
+ # OBSOLETE # code is broken.
+ # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "backtrace 100\n"
gdb_expect_list "recursive passing of structs by value" ".*$gdb_prompt $" {
".*\[\r\n\]#0 .* hitbottom \\(\\) "
proc test_list_include_file {} {
global gdb_prompt
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1"
# Ultrix gdb takes the second case below; it's also correct.
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "list list0.c:main\n"
gdb_expect {
-re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" {
timeout { fail "list list0.c:main (timeout)" }
}
- # The i960 and a29k-amd-udi are the second case
+ # The i960 is a second case
+ # OBSOLETE # The a29k-amd-udi is a second case
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
# SunPRO cc is the third case.
setup_xfail "rs6000-*-*" 1804
setup_xfail "powerpc-*-*" 1804
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
send_gdb "list list0.h:foo\n"
}
# Ultrix gdb is the second case.
- # a29k-amd-udi is the third case.
+ # OBSOLETE # a29k-amd-udi is the third case.
send_gdb "list list1.c:bar\n"
gdb_expect {
-re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
timeout { fail "list list1.c:bar (timeout)" }
}
- # The i960 and a29k-amd-udi are the second case
+ # The i960 is a second case
+ # OBSOLETE # The a29k-amd-udi is a second case
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
proc setup_xfail_on_opaque_pointer {} {
global gcc_compiled
- setup_xfail "a29k-*-udi" "vax-*-*" "i*86-sequent-bsd*"
+ setup_xfail "vax-*-*" "i*86-sequent-bsd*"
+ # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then {
setup_xfail "alpha-*-*" "mips-sgi-irix5*"
}
# (Test may involve inferior malloc() calls).
set timeout 60;
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"a string\"" " = \"a string\""
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"embedded \\000 null\"" " = \"embedded \\\\0 null\""
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"abcd\"\[2\]" " = 99 'c'"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p sizeof (\"abcdef\")" " = 7"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "ptype \"foo\"" " = char \\\[4\\\]"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p *\"foo\"" " = 102 'f'"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "ptype *\"foo\"" " = char"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p &*\"foo\"" " = \"foo\""
setup_xfail "*-*-*"
gdb_test "ptype &*\"foo\"" "type = char \\*"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p (char *)\"foo\"" " = \"foo\""
}
# (Test may involve inferior malloc() calls).
set timeout 60;
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print {'a','b','c'}" " = \"abc\""
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {0,1,2}" " = {0, 1, 2}"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {(long)0,(long)1,(long)2}" " = {0, 1, 2}"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {{0,1,2},{3,4,5}}" " = {{0, 1, 2}, {3, 4, 5}}"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print {4,5,6}\[2\]" " = 6"
- setup_xfail "a29k-*-udi" 2416
+ # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print *&{4,5,6}\[1\]" " = 5"
}
# test both whatis and ptype for all the types, the tests should be
# merged into whatis.exp, or else maintenance will be a royal pain -kingdon
#setup_xfail "i960-*-*" 1821
-#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#setup_xfail "mips-idt-*" "mips-sgi-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char\n"
#gdb_expect {
# -re "type = char.*$gdb_prompt $" { pass "ptype char" }
#}
#
#
-#setup_xfail "mips-*-*" "a29k-*-*"
+#setup_xfail "mips-*-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char\n"
#gdb_expect {
# -re "type = signed char.*$gdb_prompt $" { pass "ptype signed char" }
# test ptype command with arrays
#
#setup_xfail "i960-*-*" 1821
-#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#setup_xfail "mips-idt-*" "mips-sgi-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char_array\n"
#gdb_expect {
# -re "type = char .2..*$gdb_prompt $" { pass "ptype char array" }
#}
#
#
-#setup_xfail "mips-*-*" "a29k-*-*"
+#setup_xfail "mips-*-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char_array\n"
#gdb_expect {
# -re "type = (|signed )char .2..*$gdb_prompt $" { pass "ptype signed char array" }
## test ptype command with pointers
##
#setup_xfail "i960-*-*" 1821
-#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#setup_xfail "mips-idt-*" "mips-sgi-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char_pointer\n"
#gdb_expect {
# -re "type = char \*.*$gdb_prompt $" { pass "ptype char pointer" }
#}
#
#
-#setup_xfail "mips-*-*" "a29k-*-*"
+#setup_xfail "mips-*-*"
+# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char_pointer\n"
#gdb_expect {
# -re "type = (|signed )char \*.*$gdb_prompt $"
# This test will only fail if the file was compiled by gcc, but
# there's no way to check that.
- setup_xfail "a29k-*-udi" 2423
+ # OBSOLETE setup_xfail "a29k-*-udi" 2423
if [gdb_test "cont" "Break.* marker4.*at .*:$decimal.*" \
"continue to marker4 in scope.exp"] then { gdb_suppress_tests }
if [gdb_test "up" ".*localscopes.*" "up from marker4 in scope.exp"] {
return -1;
}
-# The a29k can't call functions, so don't even bother with this test.
-if [istarget "a29k-*-udi"] then {
- setup_xfail "a29k-*-udi" 2416
- fail "a29k-*-udi can not call functions"
+
+# Some targets can't call functions, so don't even bother with this
+# test.
+if [target_info exists gdb,cannot_call_functions] {
+ setup_xfail "*-*-*" 2416
+ fail "This target can not call functions"
continue
}
} else {
set signed_char "signed char"
}
-setup_xfail "a29k-*-*"
+# OBSOLETE setup_xfail "a29k-*-*"
if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
gdb_test "whatis v_signed_char" \
"type = $signed_char" \
global dm_type_void
global dm_type_void_star
- # These tests don't work for COFF targets; don't even try them
- if [istarget "a29k-*-udi"] then {
- setup_xfail "a29k-*-udi"
- fail "skipping operator tests"
- return
- }
+ # OBSOLETE # # These tests don't work for COFF targets; don't even try them
+ # OBSOLETE # if [istarget "a29k-*-udi"] then {
+ # OBSOLETE # setup_xfail "a29k-*-udi"
+ # OBSOLETE # fail "skipping operator tests"
+ # OBSOLETE # return
+ # OBSOLETE # }
# operator* requires quoting so that GDB does not treat it as a regexp.
info_func "operator\\*(" "void foo::operator*($dm_type_foo_ref);"
# See what language gdb thinks main() is, prior to reading full symbols.
# I think this fails for COFF targets.
- setup_xfail "a29k-*-udi"
+ # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "show language\n"
gdb_expect {
-re ".* source language is \"auto; currently c\[+\]+\".*$gdb_prompt $" {
projects / external / binutils.git / commitdiff