net: Move network rules to drivers/net

The code under drivers/net is related to ethernet networking drivers, in
some fashion or another.  Drop these from the top-level Makefile and
also move the phy rule into drivers/net/Makefile which is where it
belongs.  Make the new rule for drivers/net check for the build-stage
relevant ETH symbol.

Fix up some Kconfig dependencies while we're here to mirror how the
Makefile logic now works.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Introduce ETH, Kconfig dependency changes, am43xx fix]
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/Makefile b/Makefile
index 9465e22..72cfa5c 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -813,9 +813,6 @@ libs-y += fs/
 libs-y += net/
 libs-y += disk/
 libs-y += drivers/
-libs-y += drivers/net/
-libs-y += drivers/net/phy/
-libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
 libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c43df88..34e8a12 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -585,6 +585,7 @@ config SPL_SAVEENV
 config SPL_ETH
        bool "Support Ethernet"
        depends on SPL_ENV_SUPPORT
+       depends on SPL_NET
        help
          Enable access to the network subsystem and associated Ethernet
          drivers in SPL. This permits SPL to load U-Boot over an Ethernet
@@ -1216,6 +1217,7 @@ if SPL_USB_GADGET
 
 config SPL_USB_ETHER
        bool "Support USB Ethernet drivers"
+       depends on SPL_NET
        help
          Enable access to the USB network subsystem and associated
          drivers in SPL. This permits SPL to load U-Boot over a

diff --git a/drivers/Makefile b/drivers/Makefile
index 1283b88..4cbc407 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
 obj-y += mtd/
 obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
+obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
 obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
@@ -48,9 +49,6 @@ obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
 obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_ETH) += net/
-obj-$(CONFIG_SPL_ETH) += net/phy/
-obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET) += usb/common/

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0b906db..8b1add1 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2,6 +2,9 @@ source "drivers/net/phy/Kconfig"
 source "drivers/net/pfe_eth/Kconfig"
 source "drivers/net/fsl-mc/Kconfig"
 
+config ETH
+       def_bool y
+
 config DM_ETH
        bool "Enable Driver Model for Ethernet drivers"
        depends on DM

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b94ccea..96c061a 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -3,6 +3,8 @@
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
+obj-y += phy/
+
 obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
 obj-$(CONFIG_AG7XXX) += ag7xxx.o
 obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
@@ -33,6 +35,7 @@ obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o
 obj-$(CONFIG_EP93XX) += ep93xx_eth.o
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_FEC_MXC) += fec_mxc.o
+obj-$(CONFIG_FMAN_ENET) += fm/
 obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
 obj-$(CONFIG_FTGMAC100) += ftgmac100.o
 obj-$(CONFIG_FTMAC110) += ftmac110.o

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index d4d463d..ff1949e 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -59,7 +59,7 @@
 #define CONFIG_AM437X_USB2PHY2_HOST
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
 #undef CONFIG_USB_DWC3_PHY_OMAP
 #undef CONFIG_USB_DWC3_OMAP
 #undef CONFIG_USB_DWC3

diff --git a/net/eth_common.c b/net/eth_common.c
index 58f899a..82d527a 100644 (file)
--- a/net/eth_common.c
+++ b/net/eth_common.c
@@ -32,6 +32,7 @@ int eth_env_set_enetaddr_by_index(const char *base_name, int index,
 void eth_common_init(void)
 {
        bootstage_mark(BOOTSTAGE_ID_NET_ETH_START);
+#if CONFIG_IS_ENABLED(ETH)
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
        miiphy_init();
 #endif
@@ -39,6 +40,7 @@ void eth_common_init(void)
 #ifdef CONFIG_PHYLIB
        phy_init();
 #endif
+#endif
 }
 
 int eth_mac_skip(int index)