--- /dev/null
+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <net/cfg80211.h>
+
+#include <brcmu_wifi.h>
+#include <brcmu_utils.h>
+#include <defs.h>
+#include <dhd.h>
+#include <dhd_dbg.h>
+#include "fwil.h"
+#include "p2p.h"
+#include "wl_cfg80211.h"
+
+/* parameters used for p2p escan */
+#define P2PAPI_SCAN_NPROBES 1
+#define P2PAPI_SCAN_DWELL_TIME_MS 80
+#define P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS 40
+#define P2PAPI_SCAN_HOME_TIME_MS 60
+#define P2PAPI_SCAN_NPROBS_TIME_MS 30
+#define P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS 100
+#define WL_SCAN_CONNECT_DWELL_TIME_MS 200
+#define WL_SCAN_JOIN_PROBE_INTERVAL_MS 20
+
+#define BRCMF_P2P_WILDCARD_SSID "DIRECT-"
+#define BRCMF_P2P_WILDCARD_SSID_LEN (sizeof(BRCMF_P2P_WILDCARD_SSID) - 1)
+
+#define SOCIAL_CHAN_1 1
+#define SOCIAL_CHAN_2 6
+#define SOCIAL_CHAN_3 11
+#define SOCIAL_CHAN_CNT 3
+#define AF_PEER_SEARCH_CNT 2
+
+/**
+ * struct brcmf_p2p_disc_st_le - set discovery state in firmware.
+ *
+ * @state: requested discovery state (see enum brcmf_p2p_disc_state).
+ * @chspec: channel parameter for %WL_P2P_DISC_ST_LISTEN state.
+ * @dwell: dwell time in ms for %WL_P2P_DISC_ST_LISTEN state.
+ */
+struct brcmf_p2p_disc_st_le {
+ u8 state;
+ __le16 chspec;
+ __le16 dwell;
+};
+
+/**
+ * enum brcmf_p2p_disc_state - P2P discovery state values
+ *
+ * @WL_P2P_DISC_ST_SCAN: P2P discovery with wildcard SSID and P2P IE.
+ * @WL_P2P_DISC_ST_LISTEN: P2P discovery off-channel for specified time.
+ * @WL_P2P_DISC_ST_SEARCH: P2P discovery with P2P wildcard SSID and P2P IE.
+ */
+enum brcmf_p2p_disc_state {
+ WL_P2P_DISC_ST_SCAN,
+ WL_P2P_DISC_ST_LISTEN,
+ WL_P2P_DISC_ST_SEARCH
+};
+
+/**
+ * struct brcmf_p2p_scan_le - P2P specific scan request.
+ *
+ * @type: type of scan method requested (values: 'E' or 'S').
+ * @reserved: reserved (ignored).
+ * @eparams: parameters used for type 'E'.
+ * @sparams: parameters used for type 'S'.
+ */
+struct brcmf_p2p_scan_le {
+ u8 type;
+ u8 reserved[3];
+ union {
+ struct brcmf_escan_params_le eparams;
+ struct brcmf_scan_params_le sparams;
+ };
+};
+
+static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p)
+{
+ return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+}
+
+/**
+ * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation.
+ *
+ * @p2p: P2P specific data.
+ */
+static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p)
+{
+ struct net_device *ndev = cfg_to_ndev(p2p->cfg);
+ u8 null_eth_addr[] = { 0, 0, 0, 0, 0, 0 };
+ s32 ret = 0;
+
+ brcmf_fil_iovar_int_set(netdev_priv(ndev), "apsta", 1);
+
+ /* In case of COB type, firmware has default mac address
+ * After Initializing firmware, we have to set current mac address to
+ * firmware for P2P device address
+ */
+ ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "p2p_da_override",
+ null_eth_addr, sizeof(null_eth_addr));
+ if (ret)
+ brcmf_err("failed to update device address ret %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * brcmf_p2p_generate_bss_mac() - derive mac addresses for P2P.
+ *
+ * @p2p: P2P specific data.
+ *
+ * P2P needs mac addresses for P2P device and interface. These are
+ * derived from the primary net device, ie. the permanent ethernet
+ * address of the device.
+ */
+static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p)
+{
+ struct net_device *ndev = cfg_to_ndev(p2p->cfg);
+
+ /* Generate the P2P Device Address. This consists of the device's
+ * primary MAC address with the locally administered bit set.
+ */
+ memcpy(p2p->dev_addr, ndev->dev_addr, ETH_ALEN);
+ p2p->dev_addr[0] |= 0x02;
+
+ /* Generate the P2P Interface Address. If the discovery and connection
+ * BSSCFGs need to simultaneously co-exist, then this address must be
+ * different from the P2P Device Address, but also locally administered.
+ */
+ memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN);
+ p2p->int_addr[4] ^= 0x80;
+}
+
+/**
+ * brcmf_p2p_scan_is_p2p_request() - is cfg80211 scan request a P2P scan.
+ *
+ * @request: the scan request as received from cfg80211.
+ *
+ * returns true if one of the ssids in the request matches the
+ * P2P wildcard ssid; otherwise returns false.
+ */
+static bool brcmf_p2p_scan_is_p2p_request(struct cfg80211_scan_request *request)
+{
+ struct cfg80211_ssid *ssids = request->ssids;
+ int i;
+
+ for (i = 0; i < request->n_ssids; i++) {
+ if (ssids[i].ssid_len != BRCMF_P2P_WILDCARD_SSID_LEN)
+ continue;
+
+ brcmf_dbg(INFO, "comparing ssid \"%s\"", ssids[i].ssid);
+ if (!memcmp(BRCMF_P2P_WILDCARD_SSID, ssids[i].ssid,
+ BRCMF_P2P_WILDCARD_SSID_LEN))
+ return true;
+ }
+ return false;
+}
+
+/**
+ * brcmf_p2p_set_discover_state - set discover state in firmware.
+ *
+ * @ifp: low-level interface object.
+ * @state: discover state to set.
+ * @chanspec: channel parameters (for state @WL_P2P_DISC_ST_LISTEN only).
+ * @listen_ms: duration to listen (for state @WL_P2P_DISC_ST_LISTEN only).
+ */
+static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state,
+ u16 chanspec, u16 listen_ms)
+{
+ struct brcmf_p2p_disc_st_le discover_state;
+ s32 ret = 0;
+ brcmf_dbg(TRACE, "enter\n");
+
+ discover_state.state = state;
+ discover_state.chspec = cpu_to_le16(chanspec);
+ discover_state.dwell = cpu_to_le16(listen_ms);
+ ret = brcmf_fil_bsscfg_data_set(ifp, "p2p_state", &discover_state,
+ sizeof(discover_state));
+ return ret;
+}
+
+/**
+ * brcmf_p2p_discover_disable_search() - reset discover state.
+ *
+ * @p2p: P2P specific data.
+ *
+ * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success.
+ */
+static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p)
+{
+ struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+ struct brcmf_p2p_disc_st_le discovery_mode;
+ int ret;
+
+ /*
+ * vif presence indicates discovery is initialized.
+ */
+ if (!vif)
+ return -ENODEV;
+
+ ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state",
+ &discovery_mode,
+ sizeof(discovery_mode));
+ if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN)
+ ret = brcmf_p2p_set_discover_state(vif->ifp,
+ WL_P2P_DISC_ST_SCAN, 0, 0);
+ return ret;
+}
+
+/**
+ * brcmf_p2p_init_discovery() - enable discovery in the firmware.
+ *
+ * @p2p: P2P specific data.
+ *
+ * Configures the firmware to allow P2P peer discovery. Creates the
+ * virtual interface and consequently the P2P device for it.
+ */
+static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p)
+{
+ struct net_device *ndev = cfg_to_ndev(p2p->cfg);
+ struct brcmf_cfg80211_vif *vif;
+ struct brcmf_if *ifp;
+ struct p2p_bss *bss_dev;
+ s32 index;
+ s32 ret;
+
+ brcmf_dbg(TRACE, "enter\n");
+
+ bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE];
+ if (bss_dev->vif != NULL) {
+ brcmf_dbg(INFO, "do nothing, already initialized\n");
+ return 0;
+ }
+
+ /* Enable P2P Discovery in the firmware */
+ ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 1);
+ if (ret < 0) {
+ brcmf_err("set discover error\n");
+ return ret;
+ }
+
+ /* obtain bsscfg index for P2P discovery */
+ ret = brcmf_fil_iovar_int_get(netdev_priv(ndev), "p2p_dev", &index);
+ if (ret < 0) {
+ brcmf_err("retrieving discover bsscfg index failed\n");
+ return ret;
+ }
+
+ /*
+ * need brcmf_if for setting the discovery state.
+ */
+ ifp = kzalloc(sizeof(*vif->ifp), GFP_KERNEL);
+ if (!ifp) {
+ brcmf_err("could not create discovery if\n");
+ return -ENOMEM;
+ }
+
+ /* set required fields */
+ ifp->drvr = p2p->cfg->pub;
+ ifp->ifidx = 0;
+ ifp->bssidx = index;
+
+ /* Set the initial discovery state to SCAN */
+ ret = brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0);
+
+ if (ret != 0) {
+ brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n");
+ (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0);
+ kfree(ifp);
+ return ret;
+ }
+
+ /* create a vif for it */
+ vif = brcmf_alloc_vif(p2p->cfg, NULL, NL80211_IFTYPE_P2P_DEVICE, false);
+ if (IS_ERR(vif)) {
+ brcmf_err("could not create discovery vif\n");
+ kfree(ifp);
+ return PTR_ERR(vif);
+ }
+
+ vif->ifp = ifp;
+ ifp->vif = vif;
+ bss_dev->vif = vif;
+
+ return 0;
+}
+
+/**
+ * brcmf_p2p_deinit_discovery() - disable P2P device discovery.
+ *
+ * @p2p: P2P specific data.
+ *
+ * Resets the discovery state and disables it in firmware. The virtual
+ * interface and P2P device are freed.
+ */
+static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p)
+{
+ struct net_device *ndev = cfg_to_ndev(p2p->cfg);
+ struct brcmf_if *ifp;
+ struct p2p_bss *bss_dev;
+ brcmf_dbg(TRACE, "enter\n");
+
+ bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE];
+ if (bss_dev->vif == NULL) {
+ brcmf_err("do nothing, not initialized\n");
+ return -EINVAL;
+ }
+
+ ifp = bss_dev->vif->ifp;
+
+ /* Set the discovery state to SCAN */
+ (void)brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0);
+
+ /* Disable P2P discovery in the firmware */
+ (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0);
+
+ /* remove discovery interface */
+ brcmf_free_vif(bss_dev->vif);
+ bss_dev->vif = NULL;
+ kfree(ifp);
+
+ return 0;
+}
+
+/**
+ * brcmf_p2p_enable_discovery() - initialize and configure discovery.
+ *
+ * @p2p: P2P specific data.
+ * @ie: buffer containing information elements.
+ * @ie_len: length of @ie buffer.
+ *
+ * Initializes the discovery device and configure the virtual interface.
+ */
+static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p,
+ const u8 *ie, u32 ie_len)
+{
+ struct brcmf_cfg80211_vif *vif;
+ s32 ret = 0;
+
+ brcmf_dbg(TRACE, "enter\n");
+ vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+ if (vif) {
+ brcmf_dbg(INFO,
+ "DISCOVERY init already done, just process IE\n");
+ goto set_ie;
+ }
+
+ ret = brcmf_p2p_init_discovery(p2p);
+ if (ret < 0) {
+ brcmf_err("init discovery error %d\n", ret);
+ goto exit;
+ }
+
+ vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+
+ /*
+ * Set wsec to any non-zero value in the discovery bsscfg
+ * to ensure our P2P probe responses have the privacy bit
+ * set in the 802.11 WPA IE. Some peer devices may not
+ * initiate WPS with us if this bit is not set.
+ */
+ ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED);
+ if (ret < 0)
+ brcmf_err("wsec error %d\n", ret);
+
+set_ie:
+ if (ie_len) {
+ ret = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
+ ie, ie_len);
+
+ if (ret < 0) {
+ brcmf_err("set probreq ie occurs error %d\n", ret);
+ goto exit;
+ }
+ }
+exit:
+ return ret;
+}
+
+/*
+ * brcmf_p2p_escan() - initiate a P2P scan.
+ *
+ * @p2p: P2P specific data.
+ * @num_chans: number of channels to scan.
+ * @chanspecs: channel parameters for @num_chans channels.
+ * @search_state: P2P discover state to use.
+ * @action: scan action to pass to firmware.
+ * @bss_type: type of P2P bss.
+ */
+static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
+ u16 chanspecs[], s32 search_state, u16 action,
+ enum p2p_bss_type bss_type)
+{
+ s32 ret = 0;
+ s32 memsize = offsetof(struct brcmf_p2p_scan_le,
+ eparams.params_le.channel_list);
+ s32 nprobes;
+ s32 active;
+ u32 i;
+ u8 *memblk;
+ struct brcmf_cfg80211_vif *vif;
+ struct brcmf_p2p_scan_le *p2p_params;
+ struct brcmf_scan_params_le *sparams;
+ struct brcmf_ssid ssid;
+
+ /* add padding if uneven */
+ if (num_chans % 2)
+ memsize += sizeof(__le16);
+ memsize += num_chans * sizeof(__le16);
+ memblk = kzalloc(memsize, GFP_KERNEL);
+ if (!memblk)
+ return -ENOMEM;
+
+ vif = p2p->bss_idx[bss_type].vif;
+ if (vif == NULL) {
+ brcmf_err("no vif for bss type %d\n", bss_type);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ switch (search_state) {
+ case WL_P2P_DISC_ST_SEARCH:
+ /*
+ * If we in SEARCH STATE, we don't need to set SSID explictly
+ * because dongle use P2P WILDCARD internally by default
+ */
+ /* use null ssid */
+ ssid.SSID_len = 0;
+ memset(ssid.SSID, 0, sizeof(ssid.SSID));
+ break;
+ case WL_P2P_DISC_ST_SCAN:
+ /*
+ * wpa_supplicant has p2p_find command with type social or
+ * progressive. For progressive, we need to set the ssid to
+ * P2P WILDCARD because we just do broadcast scan unless
+ * setting SSID.
+ */
+ ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN;
+ memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len);
+ break;
+ default:
+ brcmf_err(" invalid search state %d\n", search_state);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0);
+
+ /*
+ * set p2p scan parameters.
+ */
+ p2p_params = (struct brcmf_p2p_scan_le *)memblk;
+ p2p_params->type = 'E';
+
+ /* determine the scan engine parameters */
+ sparams = &p2p_params->eparams.params_le;
+ sparams->bss_type = DOT11_BSSTYPE_ANY;
+ if (p2p->cfg->active_scan)
+ sparams->scan_type = 0;
+ else
+ sparams->scan_type = 1;
+
+ memset(&sparams->bssid, 0xFF, ETH_ALEN);
+ if (ssid.SSID_len)
+ memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len);
+ sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len);
+ sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS);
+
+ /*
+ * SOCIAL_CHAN_CNT + 1 takes care of the Progressive scan
+ * supported by the supplicant.
+ */
+ if (num_chans == SOCIAL_CHAN_CNT || num_chans == (SOCIAL_CHAN_CNT + 1))
+ active = P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS;
+ else if (num_chans == AF_PEER_SEARCH_CNT)
+ active = P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS;
+ else if (wl_get_vif_state_all(p2p->cfg, BRCMF_VIF_STATUS_CONNECTED))
+ active = -1;
+ else
+ active = P2PAPI_SCAN_DWELL_TIME_MS;
+
+ /* Override scan params to find a peer for a connection */
+ if (num_chans == 1) {
+ active = WL_SCAN_CONNECT_DWELL_TIME_MS;
+ /* XXX WAR to sync with presence period of VSDB GO.
+ * send probe request more frequently
+ */
+ nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS;
+ } else {
+ nprobes = active / P2PAPI_SCAN_NPROBS_TIME_MS;
+ }
+
+ if (nprobes <= 0)
+ nprobes = 1;
+
+ brcmf_dbg(INFO, "nprobes # %d, active_time %d\n", nprobes, active);
+ sparams->active_time = cpu_to_le32(active);
+ sparams->nprobes = cpu_to_le32(nprobes);
+ sparams->passive_time = cpu_to_le32(-1);
+ sparams->channel_num = cpu_to_le32(num_chans &
+ BRCMF_SCAN_PARAMS_COUNT_MASK);
+ for (i = 0; i < num_chans; i++)
+ sparams->channel_list[i] = cpu_to_le16(chanspecs[i]);
+
+ /* set the escan specific parameters */
+ p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
+ p2p_params->eparams.action = cpu_to_le16(action);
+ p2p_params->eparams.sync_id = cpu_to_le16(0x1234);
+ /* perform p2p scan on primary device */
+ ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize);
+ if (!ret)
+ set_bit(BRCMF_SCAN_STATUS_BUSY, &p2p->cfg->scan_status);
+exit:
+ kfree(memblk);
+ return ret;
+}
+
+/**
+ * brcmf_p2p_run_escan() - escan callback for peer-to-peer.
+ *
+ * @cfg: driver private data for cfg80211 interface.
+ * @ndev: net device for which scan is requested.
+ * @request: scan request from cfg80211.
+ * @action: scan action.
+ *
+ * Determines the P2P discovery state based to scan request parameters and
+ * validates the channels in the request.
+ */
+static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg,
+ struct net_device *ndev,
+ struct cfg80211_scan_request *request,
+ u16 action)
+{
+ struct brcmf_p2p_info *p2p = &cfg->p2p;
+ s32 err = 0;
+ s32 search_state = WL_P2P_DISC_ST_SCAN;
+ struct brcmf_cfg80211_vif *vif;
+ struct net_device *dev = NULL;
+ int i, num_nodfs = 0;
+ u16 *chanspecs;
+
+ brcmf_dbg(TRACE, "enter\n");
+
+ if (!request) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ if (request->n_channels) {
+ chanspecs = kcalloc(request->n_channels, sizeof(*chanspecs),
+ GFP_KERNEL);
+ if (!chanspecs) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif;
+ if (vif)
+ dev = vif->wdev.netdev;
+ if (request->n_channels == 3 &&
+ request->channels[0]->hw_value == SOCIAL_CHAN_1 &&
+ request->channels[1]->hw_value == SOCIAL_CHAN_2 &&
+ request->channels[2]->hw_value == SOCIAL_CHAN_3) {
+ /* SOCIAL CHANNELS 1, 6, 11 */
+ search_state = WL_P2P_DISC_ST_SEARCH;
+ brcmf_dbg(INFO, "P2P SEARCH PHASE START\n");
+ } else if (dev != NULL && vif->mode == WL_MODE_AP) {
+ /* If you are already a GO, then do SEARCH only */
+ brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n");
+ search_state = WL_P2P_DISC_ST_SEARCH;
+ } else {
+ brcmf_dbg(INFO, "P2P SCAN STATE START\n");
+ }
+
+ /*
+ * no P2P scanning on passive or DFS channels.
+ */
+ for (i = 0; i < request->n_channels; i++) {
+ struct ieee80211_channel *chan = request->channels[i];
+
+ if (chan->flags & (IEEE80211_CHAN_RADAR |
+ IEEE80211_CHAN_PASSIVE_SCAN))
+ continue;
+
+ chanspecs[i] = channel_to_chanspec(chan);
+ brcmf_dbg(INFO, "%d: chan=%d, channel spec=%x\n",
+ num_nodfs, chan->hw_value, chanspecs[i]);
+ num_nodfs++;
+ }
+ err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state,
+ action, P2PAPI_BSSCFG_DEVICE);
+ }
+exit:
+ if (err)
+ brcmf_err("error (%d)\n", err);
+ return err;
+}
+
+/**
+ * brcmf_p2p_scan_prep() - prepare scan based on request.
+ *
+ * @wiphy: wiphy device.
+ * @request: scan request from cfg80211.
+ *
+ * Prepare the scan appropriately for type of scan requested. Overrides the
+ * escan .run() callback for peer-to-peer scanning.
+ */
+int brcmf_p2p_scan_prep(struct wiphy *wiphy,
+ struct cfg80211_scan_request *request)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct brcmf_p2p_info *p2p = &cfg->p2p;
+ int err = 0;
+
+ if (brcmf_p2p_scan_is_p2p_request(request)) {
+ /* find my listen channel */
+ err = cfg80211_get_p2p_attr(request->ie, request->ie_len,
+ IEEE80211_P2P_ATTR_LISTEN_CHANNEL,
+ &p2p->listen_channel, 1);
+ if (err < 0)
+ return err;
+
+ clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status);
+ brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n");
+
+ err = brcmf_p2p_enable_discovery(p2p, request->ie,
+ request->ie_len);
+
+ /*
+ * override .run_escan() callback.
+ */
+ cfg->escan_info.run = brcmf_p2p_run_escan;
+ } else {
+ /*
+ * legacy scan trigger
+ * So, we have to disable p2p discovery if p2p discovery is on
+ */
+ (void)brcmf_p2p_discover_disable_search(p2p);
+
+ /*
+ * clear p2p vendor ies for probe request set by
+ * previous p2p related scan(s).
+ */
+ if (p2p_discover_vif(p2p))
+ err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p),
+ BRCMF_VNDR_IE_PRBREQ_FLAG,
+ request->ie,
+ request->ie_len);
+ }
+ return err;
+}
+
+/**
+ * brcmf_p2p_attach() - attach for P2P.
+ *
+ * @cfg: driver private data for cfg80211 interface.
+ */
+void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
+{
+ struct brcmf_p2p_info *p2p;
+
+ p2p = &cfg->p2p;
+
+ p2p->cfg = cfg;
+ brcmf_p2p_set_firmware(p2p);
+ brcmf_p2p_generate_bss_mac(p2p);
+}
+
+/**
+ * brcmf_p2p_detach() - detach P2P.
+ *
+ * @p2p: P2P specific data.
+ */
+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p)
+{
+ brcmf_p2p_deinit_discovery(p2p);
+ /* just set it all to zero */
+ memset(p2p, 0, sizeof(*p2p));
+}
+
+/**
+ * brcmf_p2p_add_vif() - create a new P2P virtual interface.
+ *
+ * @wiphy: wiphy device of new interface.
+ * @name: name of the new interface.
+ * @type: nl80211 interface type.
+ * @flags: TBD
+ * @params: TBD
+ *
+ * TODO: not yet supported.
+ */
+struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ brcmf_err("enter - not supported yet\n");
+ brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type);
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+/**
+ * brcmf_p2p_del_vif() - delete a P2P virtual interface.
+ *
+ * @wiphy: wiphy device of interface.
+ * @wdev: wireless device of interface.
+ *
+ * TODO: not yet supported.
+ */
+int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
+{
+ struct brcmf_cfg80211_vif *vif;
+
+ vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+ if (wdev->netdev)
+ brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name);
+ else
+ brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n",
+ wdev->identifier);
+ brcmf_err("enter - not supported yet\n");
+ return -EOPNOTSUPP;
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef WL_CFGP2P_H_
+#define WL_CFGP2P_H_
+
+#include <net/cfg80211.h>
+
+struct brcmf_cfg80211_info;
+
+/* vendor ies max buffer length for probe response or beacon */
+#define VNDR_IES_MAX_BUF_LEN 1400
+/* normal vendor ies buffer length */
+#define VNDR_IES_BUF_LEN 512
+
+/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */
+/**
+ * enum p2p_bss_type - different type of BSS configurations.
+ *
+ * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg.
+ * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg.
+ * @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg.
+ * @P2PAPI_BSSCFG_MAX: used for range checking.
+ */
+enum p2p_bss_type {
+ P2PAPI_BSSCFG_PRIMARY, /* maps to driver's primary bsscfg */
+ P2PAPI_BSSCFG_DEVICE, /* maps to driver's P2P device discovery bsscfg */
+ P2PAPI_BSSCFG_CONNECTION, /* maps to driver's P2P connection bsscfg */
+ P2PAPI_BSSCFG_MAX
+};
+
+/**
+ * struct p2p_bss - peer-to-peer bss related information.
+ *
+ * @vif: virtual interface of this P2P bss.
+ * @private_data: TBD
+ */
+struct p2p_bss {
+ struct brcmf_cfg80211_vif *vif;
+ void *private_data;
+};
+
+/**
+ * enum brcmf_p2p_status - P2P specific dongle status.
+ *
+ * @BRCMF_P2P_STATUS_IF_ADD: peer-to-peer vif add sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_DEL: NOT-USED?
+ * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle.
+ * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired.
+ * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed.
+ * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked.
+ * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing.
+ */
+enum brcmf_p2p_status {
+ BRCMF_P2P_STATUS_IF_ADD = 0,
+ BRCMF_P2P_STATUS_IF_DEL,
+ BRCMF_P2P_STATUS_IF_DELETING,
+ BRCMF_P2P_STATUS_IF_CHANGING,
+ BRCMF_P2P_STATUS_IF_CHANGED,
+ BRCMF_P2P_STATUS_LISTEN_EXPIRED,
+ BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
+ BRCMF_P2P_STATUS_ACTION_TX_NOACK,
+ BRCMF_P2P_STATUS_GO_NEG_PHASE
+};
+
+/**
+ * struct brcmf_p2p_info - p2p specific driver information.
+ *
+ * @cfg: driver private data for cfg80211 interface.
+ * @status: status of P2P (see enum brcmf_p2p_status).
+ * @dev_addr: P2P device address.
+ * @int_addr: P2P interface address.
+ * @bss_idx: informate for P2P bss types.
+ * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state.
+ * @ssid: ssid for P2P GO.
+ * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state.
+ */
+struct brcmf_p2p_info {
+ struct brcmf_cfg80211_info *cfg;
+ unsigned long status;
+ u8 dev_addr[ETH_ALEN];
+ u8 int_addr[ETH_ALEN];
+ struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX];
+ struct timer_list listen_timer;
+ struct brcmf_ssid ssid;
+ u8 listen_channel;
+};
+
+void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg);
+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p);
+struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params);
+int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev);
+int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev);
+void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev);
+int brcmf_p2p_scan_prep(struct wiphy *wiphy,
+ struct cfg80211_scan_request *request);
+
+#endif /* WL_CFGP2P_H_ */
#include <brcmu_wifi.h>
#include "dhd.h"
#include "dhd_dbg.h"
+#include "p2p.h"
#include "wl_cfg80211.h"
#include "fwil.h"
#define BRCMF_PNO_SCAN_COMPLETE 1
#define BRCMF_PNO_SCAN_INCOMPLETE 0
-#define BRCMF_IFACE_MAX_CNT 2
+#define BRCMF_IFACE_MAX_CNT 3
-#define TLV_LEN_OFF 1 /* length offset */
-#define TLV_HDR_LEN 2 /* header length */
-#define TLV_BODY_OFF 2 /* body offset */
-#define TLV_OUI_LEN 3 /* oui id length */
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
#define WPA_OUI_TYPE 1
#define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */
#define VNDR_IE_PKTFLAG_OFFSET 8
#define VNDR_IE_VSIE_OFFSET 12
#define VNDR_IE_HDR_SIZE 12
-#define VNDR_IE_BEACON_FLAG 0x1
-#define VNDR_IE_PRBRSP_FLAG 0x2
-#define MAX_VNDR_IE_NUMBER 5
+#define VNDR_IE_PARSE_LIMIT 5
#define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */
#define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */
WLAN_CIPHER_SUITE_AES_CMAC,
};
-/* tag_ID/length/value_buffer tuple */
-struct brcmf_tlv {
- u8 id;
- u8 len;
- u8 data[1];
-};
-
/* Vendor specific ie. id = 221, oui and type defines exact ie */
struct brcmf_vs_tlv {
u8 id;
struct parsed_vndr_ies {
u32 count;
- struct parsed_vndr_ie_info ie_info[MAX_VNDR_IE_NUMBER];
+ struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT];
};
/* Quarter dBm units to mW
return qdbm;
}
-static u16 channel_to_chanspec(struct ieee80211_channel *ch)
+u16 channel_to_chanspec(struct ieee80211_channel *ch)
{
u16 chanspec;
return err;
}
+static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
+ const char *name,
+ enum nl80211_iftype type,
+ u32 *flags,
+ struct vif_params *params)
+{
+ brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
+ switch (type) {
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ return ERR_PTR(-EOPNOTSUPP);
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ return brcmf_p2p_add_vif(wiphy, name, type, flags, params);
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_P2P_DEVICE:
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+static
+int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev)
+{
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ return -EOPNOTSUPP;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ return brcmf_p2p_del_vif(wiphy, wdev);
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_P2P_DEVICE:
+ default:
+ return -EINVAL;
+ }
+ return -EOPNOTSUPP;
+}
+
static s32
brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
enum nl80211_iftype type, u32 *flags,
s32 err;
u32 passive_scan;
struct brcmf_scan_results *results;
+ struct escan_info *escan = &cfg->escan_info;
brcmf_dbg(SCAN, "Enter\n");
- cfg->escan_info.ndev = ndev;
- cfg->escan_info.wiphy = wiphy;
- cfg->escan_info.escan_state = WL_ESCAN_STATE_SCANNING;
+ escan->ndev = ndev;
+ escan->wiphy = wiphy;
+ escan->escan_state = WL_ESCAN_STATE_SCANNING;
passive_scan = cfg->active_scan ? 0 : 1;
err = brcmf_fil_cmd_int_set(netdev_priv(ndev), BRCMF_C_SET_PASSIVE_SCAN,
passive_scan);
results->count = 0;
results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE;
- err = brcmf_run_escan(cfg, ndev, request, WL_ESCAN_ACTION_START);
+ err = escan->run(cfg, ndev, request, WL_ESCAN_ACTION_START);
if (err)
brcmf_set_mpc(ndev, 1);
return err;
cfg->scan_request = request;
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
if (escan_req) {
+ cfg->escan_info.run = brcmf_run_escan;
+ err = brcmf_p2p_scan_prep(wiphy, request);
+ if (err)
+ goto scan_out;
+
err = brcmf_do_escan(cfg, wiphy, ndev, request);
if (err)
goto scan_out;
* triples, returning a pointer to the substring whose first element
* matches tag
*/
-static struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key)
+struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key)
{
struct brcmf_tlv *elt;
int totlen;
parsed_info->vndrie.oui[2],
parsed_info->vndrie.oui_type);
- if (vndr_ies->count >= MAX_VNDR_IE_NUMBER)
+ if (vndr_ies->count >= VNDR_IE_PARSE_LIMIT)
break;
next:
remaining_len -= (ie->len + TLV_HDR_LEN);
return ie_len + VNDR_IE_HDR_SIZE;
}
-static
s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
const u8 *vndr_ie_buf, u32 vndr_ie_len)
{
curr_ie_buf = iovar_ie_buf;
if (ifp->vif->mode == WL_MODE_AP) {
switch (pktflag) {
- case VNDR_IE_PRBRSP_FLAG:
+ case BRCMF_VNDR_IE_PRBRSP_FLAG:
mgmt_ie_buf = saved_ie->probe_res_ie;
mgmt_ie_len = &saved_ie->probe_res_ie_len;
mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie);
break;
- case VNDR_IE_BEACON_FLAG:
+ case BRCMF_VNDR_IE_BEACON_FLAG:
mgmt_ie_buf = saved_ie->beacon_ie;
mgmt_ie_len = &saved_ie->beacon_ie_len;
mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie);
goto exit;
}
} else {
- err = -EPERM;
- brcmf_err("not suitable type\n");
- goto exit;
+ switch (pktflag) {
+ case BRCMF_VNDR_IE_PRBREQ_FLAG:
+ mgmt_ie_buf = saved_ie->probe_req_ie;
+ mgmt_ie_len = &saved_ie->probe_req_ie_len;
+ mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie);
+ break;
+ default:
+ err = -EPERM;
+ brcmf_err("not suitable type\n");
+ goto exit;
+ }
}
if (vndr_ie_len > mgmt_ie_buf_len) {
}
/* Set Beacon IEs to FW */
err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev),
- VNDR_IE_BEACON_FLAG,
+ BRCMF_VNDR_IE_BEACON_FLAG,
settings->beacon.tail,
settings->beacon.tail_len);
if (err)
/* Set Probe Response IEs to FW */
err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev),
- VNDR_IE_PRBRSP_FLAG,
+ BRCMF_VNDR_IE_PRBRSP_FLAG,
settings->beacon.proberesp_ies,
settings->beacon.proberesp_ies_len);
if (err)
}
static struct cfg80211_ops wl_cfg80211_ops = {
+ .add_virtual_intf = brcmf_cfg80211_add_iface,
+ .del_virtual_intf = brcmf_cfg80211_del_iface,
.change_virtual_intf = brcmf_cfg80211_change_iface,
.scan = brcmf_cfg80211_scan,
.set_wiphy_params = brcmf_cfg80211_set_wiphy_params,
#endif
};
-static s32 brcmf_mode_to_nl80211_iftype(s32 mode)
+static s32 brcmf_nl80211_iftype_to_mode(enum nl80211_iftype type)
{
- s32 err = 0;
-
- switch (mode) {
- case WL_MODE_BSS:
- return NL80211_IFTYPE_STATION;
- case WL_MODE_IBSS:
- return NL80211_IFTYPE_ADHOC;
+ switch (type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ return -ENOTSUPP;
+ case NL80211_IFTYPE_ADHOC:
+ return WL_MODE_IBSS;
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ return WL_MODE_BSS;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ return WL_MODE_AP;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ return WL_MODE_P2P;
+ case NL80211_IFTYPE_UNSPECIFIED:
default:
- return NL80211_IFTYPE_UNSPECIFIED;
+ break;
}
- return err;
+ return -EINVAL;
}
static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
}
+static const struct ieee80211_iface_limit brcmf_iface_limits[] = {
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP)
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO)
+ },
+};
+static const struct ieee80211_iface_combination brcmf_iface_combos[] = {
+ {
+ .max_interfaces = BRCMF_IFACE_MAX_CNT - 1,
+ .num_different_channels = 1, /* no multi-channel for now */
+ .n_limits = ARRAY_SIZE(brcmf_iface_limits),
+ .limits = brcmf_iface_limits
+ }
+};
+
static struct wiphy *brcmf_setup_wiphy(struct device *phydev)
{
struct wiphy *wiphy;
}
set_wiphy_dev(wiphy, phydev);
wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
+ wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ wiphy->iface_combinations = brcmf_iface_combos;
+ wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a; /* Set
* it as 11a by default.
return wiphy;
}
-static
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
struct net_device *netdev,
- s32 mode, bool pm_block)
+ enum nl80211_iftype type,
+ bool pm_block)
{
struct brcmf_cfg80211_vif *vif;
if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT)
return ERR_PTR(-ENOSPC);
+ brcmf_dbg(TRACE, "allocating virtual interface (size=%d)\n",
+ sizeof(*vif));
vif = kzalloc(sizeof(*vif), GFP_KERNEL);
if (!vif)
return ERR_PTR(-ENOMEM);
vif->wdev.wiphy = cfg->wiphy;
vif->wdev.netdev = netdev;
- vif->wdev.iftype = brcmf_mode_to_nl80211_iftype(mode);
+ vif->wdev.iftype = type;
if (netdev) {
vif->ifp = netdev_priv(netdev);
SET_NETDEV_DEV(netdev, wiphy_dev(cfg->wiphy));
}
- vif->mode = mode;
+ vif->mode = brcmf_nl80211_iftype_to_mode(type);
vif->pm_block = pm_block;
vif->roam_off = -1;
return vif;
}
-static void brcmf_free_vif(struct brcmf_cfg80211_vif *vif)
+void brcmf_free_vif(struct brcmf_cfg80211_vif *vif)
{
struct brcmf_cfg80211_info *cfg;
struct wiphy *wiphy;
cfg->pub = drvr;
INIT_LIST_HEAD(&cfg->vif_list);
- vif = brcmf_alloc_vif(cfg, ndev, WL_MODE_BSS, false);
+ vif = brcmf_alloc_vif(cfg, ndev, NL80211_IFTYPE_STATION, false);
if (IS_ERR(vif)) {
wiphy_free(wiphy);
return NULL;
brcmf_err("Failed to init iwm_priv (%d)\n", err);
goto cfg80211_attach_out;
}
+ brcmf_p2p_attach(cfg);
ifp->vif = vif;
return cfg;
return err;
}
+u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state)
+{
+ struct brcmf_cfg80211_vif *vif;
+ bool result = 0;
+
+ list_for_each_entry(vif, &cfg->vif_list, list) {
+ if (test_bit(state, &vif->sme_state))
+ result++;
+ }
+ return result;
+}
projects / platform / kernel / linux-amlogic.git / commitdiff