[media] media: ti-vpe: Document CAL driver
authorBenoit Parrot <bparrot@ti.com>
Wed, 6 Jan 2016 23:37:24 +0000 (21:37 -0200)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Mon, 1 Feb 2016 10:17:36 +0000 (08:17 -0200)
Device Tree bindings for the Camera Adaptation Layer (CAL) driver

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Documentation/devicetree/bindings/media/ti-cal.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
new file mode 100644 (file)
index 0000000..ae9b52f
--- /dev/null
@@ -0,0 +1,72 @@
+Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+------------------------------------------------------
+
+The Camera Adaptation Layer (CAL) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect CSI2 image-sensor modules to the
+DRA72x device.
+
+Required properties:
+- compatible: must be "ti,dra72-cal"
+- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
+       control address space
+- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
+            registers
+- interrupts: should contain IRQ line for the CAL;
+
+CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+should contain a 'port' child node with child 'endpoint' node. Please
+refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+       cal: cal@4845b000 {
+               compatible = "ti,dra72-cal";
+               ti,hwmods = "cal";
+               reg = <0x4845B000 0x400>,
+                     <0x4845B800 0x40>,
+                     <0x4845B900 0x40>,
+                     <0x4A002e94 0x4>;
+               reg-names = "cal_top",
+                           "cal_rx_core0",
+                           "cal_rx_core1",
+                           "camerrx_control";
+               interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       csi2_0: port@0 {
+                               reg = <0>;
+                               endpoint {
+                                       slave-mode;
+                                       remote-endpoint = <&ar0330_1>;
+                               };
+                       };
+                       csi2_1: port@1 {
+                               reg = <1>;
+                       };
+               };
+       };
+
+       i2c5: i2c@4807c000 {
+               ar0330@10 {
+                       compatible = "ti,ar0330";
+                       reg = <0x10>;
+
+                       port {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               ar0330_1: endpoint {
+                                       reg = <0>;
+                                       clock-lanes = <1>;
+                                       data-lanes = <0 2 3 4>;
+                                       remote-endpoint = <&csi2_0>;
+                               };
+                       };
+               };
+       };