usb: phy: twl4030-usb: check regulator_enable return value
authorFabio Baltieri <fabio.baltieri@linaro.org>
Wed, 3 Apr 2013 14:02:26 +0000 (16:02 +0200)
committerFelipe Balbi <balbi@ti.com>
Wed, 3 Apr 2013 15:44:38 +0000 (18:44 +0300)
Since regulator_enable() is going to be marked as __must_check in the
next merge window, always check regulator_enable() return value and
print a warning if it fails.

Reviewed-by: Kalle Jokiniemi <kalle.jokiniemi@jollamobile.com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/phy/phy-twl4030-usb.c

index 3f9858f..13e17ae 100644 (file)
@@ -384,9 +384,17 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 
 static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 {
+       int ret;
+
        if (on) {
-               regulator_enable(twl->usb3v1);
-               regulator_enable(twl->usb1v8);
+               ret = regulator_enable(twl->usb3v1);
+               if (ret)
+                       dev_err(twl->dev, "Failed to enable usb3v1\n");
+
+               ret = regulator_enable(twl->usb1v8);
+               if (ret)
+                       dev_err(twl->dev, "Failed to enable usb1v8\n");
+
                /*
                 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
                 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
@@ -395,7 +403,11 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
                 * is re-activated. This ensures that VUSB3V1 is really active.
                 */
                twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
-               regulator_enable(twl->usb1v5);
+
+               ret = regulator_enable(twl->usb1v5);
+               if (ret)
+                       dev_err(twl->dev, "Failed to enable usb1v5\n");
+
                __twl4030_phy_power(twl, 1);
                twl4030_usb_write(twl, PHY_CLK_CTRL,
                                  twl4030_usb_read(twl, PHY_CLK_CTRL) |