--- /dev/null
+From ltsi-dev-bounces@lists.linuxfoundation.org Tue Jun 26 04:09:54 2012
+From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Date: Tue, 26 Jun 2012 20:09:49 +0900
+Subject: [LTSI-dev] [PATCH 1/4] LTSI: backport: ARM: mach-shmobile: kzm9g: add SMSC 9221 support
+To: ltsi-dev@lists.linuxfoundation.org
+Cc: kuninori.morimoto.gx@gmail.com
+Message-ID: <4FE9987D.9080304@kmckk.co.jp>
+
+
+This is backport of
+commit c15c4257a7858c6670f54c667f804df86a9fff1c
+
+Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+---
+ arch/arm/mach-shmobile/board-kzm9g.c | 38 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
+index e0fd6e2..35af2f8 100644
+--- a/arch/arm/mach-shmobile/board-kzm9g.c
++++ b/arch/arm/mach-shmobile/board-kzm9g.c
+@@ -30,6 +30,7 @@
+ #include <linux/mmc/sh_mobile_sdhi.h>
+ #include <linux/mfd/tmio.h>
+ #include <linux/platform_device.h>
++#include <linux/smsc911x.h>
+ #include <linux/videodev2.h>
+ #include <sound/sh_fsi.h>
+ #include <sound/simple_card.h>
+@@ -62,6 +63,35 @@
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
++/* SMSC 9221 */
++static struct resource smsc9221_resources[] = {
++ [0] = {
++ .start = 0x10000000, /* CS4 */
++ .end = 0x100000ff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = intcs_evt2irq(0x260), /* IRQ3 */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct smsc911x_platform_config smsc9221_platdata = {
++ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
++ .phy_interface = PHY_INTERFACE_MODE_MII,
++ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
++ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
++};
++
++static struct platform_device smsc_device = {
++ .name = "smsc911x",
++ .dev = {
++ .platform_data = &smsc9221_platdata,
++ },
++ .resource = smsc9221_resources,
++ .num_resources = ARRAY_SIZE(smsc9221_resources),
++};
++
+ /* LCDC */
+ static struct fb_videomode kzm_lcdc_mode = {
+ .name = "WVGA Panel",
+@@ -299,6 +329,7 @@ static struct i2c_board_info i2c3_devices[] = {
+ };
+
+ static struct platform_device *kzm_devices[] __initdata = {
++ &smsc_device,
+ &lcdc_device,
+ &mmc_device,
+ &sdhi0_device,
+@@ -443,6 +474,13 @@ static void __init kzm_init(void)
+ gpio_request(GPIO_FN_FSIAISLD, NULL);
+ gpio_request(GPIO_FN_FSIAOSLD, NULL);
+
++ /* CS4 for SMSC/USB */
++ gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
++
++ /* SMSC */
++ gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
++ gpio_direction_input(GPIO_PORT224);
++
+ #ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 64K*8way */
+ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
+--
+1.7.9.5
+
+
+_______________________________________________
+LTSI-dev mailing list
+LTSI-dev@lists.linuxfoundation.org
+https://lists.linuxfoundation.org/mailman/listinfo/ltsi-dev
+
--- /dev/null
+From ltsi-dev-bounces@lists.linuxfoundation.org Tue Jun 26 04:10:44 2012
+From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Date: Tue, 26 Jun 2012 20:10:41 +0900
+Subject: [LTSI-dev] [PATCH 2/4] LSTI: backport: ARM: mach-shmobile: kzm9g: add external USB Host support
+To: ltsi-dev@lists.linuxfoundation.org
+Cc: kuninori.morimoto.gx@gmail.com
+Message-ID: <4FE998B1.1050308@kmckk.co.jp>
+
+
+This is backport of
+commit dd818180f9303eed270513e8ccd4516bb3a577f5
+
+Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+---
+ arch/arm/mach-shmobile/board-kzm9g.c | 31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
+index 35af2f8..297cda9 100644
+--- a/arch/arm/mach-shmobile/board-kzm9g.c
++++ b/arch/arm/mach-shmobile/board-kzm9g.c
+@@ -31,6 +31,7 @@
+ #include <linux/mfd/tmio.h>
+ #include <linux/platform_device.h>
+ #include <linux/smsc911x.h>
++#include <linux/usb/r8a66597.h>
+ #include <linux/videodev2.h>
+ #include <sound/sh_fsi.h>
+ #include <sound/simple_card.h>
+@@ -92,6 +93,35 @@ static struct platform_device smsc_device = {
+ .num_resources = ARRAY_SIZE(smsc9221_resources),
+ };
+
++/* USB external chip */
++static struct r8a66597_platdata usb_host_data = {
++ .on_chip = 0,
++ .xtal = R8A66597_PLATDATA_XTAL_48MHZ,
++};
++
++static struct resource usb_resources[] = {
++ [0] = {
++ .start = 0x10010000,
++ .end = 0x1001ffff - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = intcs_evt2irq(0x220), /* IRQ1 */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device usb_host_device = {
++ .name = "r8a66597_hcd",
++ .dev = {
++ .platform_data = &usb_host_data,
++ .dma_mask = NULL,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(usb_resources),
++ .resource = usb_resources,
++};
++
+ /* LCDC */
+ static struct fb_videomode kzm_lcdc_mode = {
+ .name = "WVGA Panel",
+@@ -330,6 +360,7 @@ static struct i2c_board_info i2c3_devices[] = {
+
+ static struct platform_device *kzm_devices[] __initdata = {
+ &smsc_device,
++ &usb_host_device,
+ &lcdc_device,
+ &mmc_device,
+ &sdhi0_device,
+--
+1.7.9.5
+
+
+_______________________________________________
+LTSI-dev mailing list
+LTSI-dev@lists.linuxfoundation.org
+https://lists.linuxfoundation.org/mailman/listinfo/ltsi-dev
+
--- /dev/null
+From ltsi-dev-bounces@lists.linuxfoundation.org Tue Jun 26 04:11:21 2012
+From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Date: Tue, 26 Jun 2012 20:11:18 +0900
+Subject: [LTSI-dev] [PATCH 3/4] LTSI: bugfix: sh73a0: add lost CLK_ENABLE_ON_INIT for DIV6_ZB1
+To: ltsi-dev@lists.linuxfoundation.org
+Cc: kuninori.morimoto.gx@gmail.com
+Message-ID: <4FE998D6.9050209@kmckk.co.jp>
+
+
+On upstream kernel, on one branch,
+CLK_ENABLE_ON_INIT was added to DIV6_ZB1 clock by
+9bcc0a5d0de137b3a154dc951c5ff70dce815879
+(ARM: mach-shmobile: SH73A0 external Ethernet fix)
+
+On the other branch, below commit modified dev6_clks[] controlling method.
+d4775356bb39eaa305844cc6cc4c267236535956
+(sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT())
+
+These 2 commit had conflict, and were solved when merge window
+timing on upstream kernel.
+But unfortunately, this solution seems had be lost on backporting.
+This patch fixes it up for LTSI.
+
+Reported-by: Kunihiko Tsuji <kunihiko at kmckk.co.jp>
+Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
+Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+---
+ arch/arm/mach-shmobile/clock-sh73a0.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
+index 012b284..fcecbdc 100644
+--- a/arch/arm/mach-shmobile/clock-sh73a0.c
++++ b/arch/arm/mach-shmobile/clock-sh73a0.c
+@@ -328,7 +328,7 @@ static struct clk div6_clks[DIV6_NR] = {
+ vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
+ [DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
+ vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
+- [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, 0,
++ [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
+ pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+ [DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
+ pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+--
+1.7.9.5
+
+
+_______________________________________________
+LTSI-dev mailing list
+LTSI-dev@lists.linuxfoundation.org
+https://lists.linuxfoundation.org/mailman/listinfo/ltsi-dev
+
--- /dev/null
+From ltsi-dev-bounces@lists.linuxfoundation.org Tue Jun 26 04:12:14 2012
+From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+Date: Tue, 26 Jun 2012 20:12:11 +0900
+Subject: [LTSI-dev] [PATCH 4/4] LTSI: ARM: mach_shmobile: kzm9g: update defconfig
+To: ltsi-dev@lists.linuxfoundation.org, kuninori.morimoto.gx@gmail.com
+Message-ID: <4FE9990B.7040207@kmckk.co.jp>
+
+
+Add NET_ETHERNET and HID.
+
+Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
+---
+ arch/arm/configs/kzm9g_defconfig | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
+index 6fb27eb..b9b3722 100644
+--- a/arch/arm/configs/kzm9g_defconfig
++++ b/arch/arm/configs/kzm9g_defconfig
+@@ -64,6 +64,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_SCSI=y
+ CONFIG_BLK_DEV_SD=y
+ CONFIG_NETDEVICES=y
++CONFIG_MII=y
++CONFIG_PHYLIB=y
++CONFIG_NET_ETHERNET=y
+ CONFIG_SMSC911X=y
+ # CONFIG_WLAN is not set
+ CONFIG_INPUT_SPARSEKMAP=y
+@@ -97,7 +100,9 @@ CONFIG_SND=y
+ # CONFIG_SND_USB is not set
+ CONFIG_SND_SOC=y
+ CONFIG_SND_SOC_SH4_FSI=y
+-# CONFIG_HID_SUPPORT is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_USB_HID=y
+ CONFIG_USB=y
+ CONFIG_USB_DEVICEFS=y
+ CONFIG_USB_R8A66597_HCD=y
+--
+1.7.9.5
+
+_______________________________________________
+LTSI-dev mailing list
+LTSI-dev@lists.linuxfoundation.org
+https://lists.linuxfoundation.org/mailman/listinfo/ltsi-dev
+
--- /dev/null
+From horms@vergenet.net Thu Jun 21 17:52:36 2012
+From: Simon Horman <horms@verge.net.au>
+Date: Fri, 22 Jun 2012 09:51:53 +0900
+Subject: [PATCH] ARM: shmobile: sh73a0: bugfix: SY-DMAC number
+To: ltsi-dev@lists.linuxfoundation.org
+Cc: Greg KH <gregkh@linuxfoundation.org>
+Message-ID: <1340326313-1672-1-git-send-email-horms@verge.net.au>
+
+
+From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+681e1b3eeb3606e06a7c4984e8058df84296f8bb
+(ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC)
+adds SY-DMAC, but it is 218, not 318
+
+This patch is based on v2.0 manual
+
+Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+Acked-by: Magnus Damm <damm@opensource.se>
+Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
+(cherry picked from commit 32103c7ba7d274bcb3ace48bc3366e1df37ebb56)
+
+Conflicts:
+ arch/arm/mach-shmobile/clock-sh73a0.c
+
+Signed-off-by: Simon Horman <horms@verge.net.au>
+
+---
+
+Greg, this is a bugfix for the sh73a0 and thus my work on the KZM9G
+(not the D!) board.
+---
+ arch/arm/mach-shmobile/clock-sh73a0.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
+index 012b284..a7ae9c3 100644
+--- a/arch/arm/mach-shmobile/clock-sh73a0.c
++++ b/arch/arm/mach-shmobile/clock-sh73a0.c
+@@ -474,9 +474,9 @@ static struct clk *late_main_clks[] = {
+
+ enum { MSTP001,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
+- MSTP219,
++ MSTP219, MSTP218,
+ MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+- MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP318,
++ MSTP331, MSTP329, MSTP328, MSTP325, MSTP323,
+ MSTP314, MSTP313, MSTP312, MSTP311,
+ MSTP303, MSTP302, MSTP301, MSTP300,
+ MSTP411, MSTP410, MSTP403,
+@@ -496,6 +496,7 @@ static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
+ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
++ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
+ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+@@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/
+ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
+ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
+ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
+ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
+ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
+@@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = {
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
++ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+@@ -564,7 +565,6 @@ static struct clk_lookup lookups[] = {
+ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
+- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
+--
+1.7.10.2.484.gcd07cc5
+
+++ /dev/null
-From kuninori.morimoto.gx@gmail.com Tue Jun 12 21:51:37 2012
-From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
-Date: Tue, 12 Jun 2012 21:51:35 -0700 (PDT)
-Subject: [PATCH 2/2] LTSI: bugfix: sh73a0: add lost CLK_ENABLE_ON_INIT for DIV6_ZB1
-To: Greg KH <gregkh@linuxfoundation.org>, ltsi-dev@lists.linuxfoundation.org
-Cc: Simon <horms@verge.net.au>, Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>, (KMC)tuji <kunihiko@kmckk.co.jp>
-Message-ID: <87y5nr7r1o.wl%kuninori.morimoto.gx@renesas.com>
-
-
-On upstream kernel, on one branch,
-CLK_ENABLE_ON_INIT was added to DIV6_ZB1 clock by
-9bcc0a5d0de137b3a154dc951c5ff70dce815879
-(ARM: mach-shmobile: SH73A0 external Ethernet fix)
-
-On the other branch, below commit modified dev6_clks[] controlling method.
-d4775356bb39eaa305844cc6cc4c267236535956
-(sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT())
-
-These 2 commit had conflict, and were solved when merge window
-timing on upstream kernel.
-But unfortunately, this solution seems had be lost on backporting.
-This patch fixes it up for LTSI.
-
-Reported-by: Kunihiko Tsuji <kunihiko@kmckk.co.jp>
-Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
----
- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
-index 012b284..fcecbdc 100644
---- a/arch/arm/mach-shmobile/clock-sh73a0.c
-+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
-@@ -328,7 +328,7 @@ static struct clk div6_clks[DIV6_NR] = {
- vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
- [DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
- vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-- [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, 0,
-+ [DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
- pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
- [DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
- pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
---
-1.7.5.4
-
patches.kzm9g/ltsi-arm-shmobile-kzm9g-support-real-time-clock.patch
patches.kzm9g/ltsi-bugfix-add-config_i2c-to-kzm9g_defconfig.patch
+patches.kzm9g/arm-shmobile-sh73a0-bugfix-sy-dmac-number.patch
+
+patches.kzm9g/001-ltsi-backport-arm-mach-shmobile-kzm9g-add-smsc-9221-support.patch
+patches.kzm9g/002-lsti-backport-arm-mach-shmobile-kzm9g-add-external-usb-host-support.patch
+patches.kzm9g/003-ltsi-bugfix-sh73a0-add-lost-clk_enable_on_init-for-div6_zb1.patch
+patches.kzm9g/004-ltsi-arm-mach_shmobile-kzm9g-update-defconfig.patch
patches.sh7757lcr/001-spi-add-support-for-renesas-rspi.patch
# This is usually due to merge issues, or specific things like config file
# changes that are needed for the BSP being added.
-patches.ltsi/ltsi-bugfix-sh73a0-add-lost-clk_enable_on_init-for-div6_zb1.patch
projects / platform / kernel / linux-stable.git / commitdiff