dt: document HiSilicon SPMI controller and mfd/regulator properties

Add documentation for the properties needed by the HiSilicon
6421v600 driver, and by the SPMI controller used to access
the chipset.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/56c40a260bf31edf7049f50586c63ee0d06e02cb.1597762400.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644 (file)
index 0000000..c76093f
--- /dev/null
+++ b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml.
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      Identify that the PMIC is capable of behaving as an interrupt controller.
+
+  gpios:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^ldo[0-9]+@[0-9a-f]$':
+        type: object
+
+        $ref: "/schemas/regulator/regulator.yaml#"
+
+        properties:
+          reg:
+            description: Enable register.
+
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          vsel-reg:
+            description: Voltage selector register.
+
+          enable-mask:
+            description: Bitmask used to enable the regulator.
+
+          voltage-table:
+            description: Table with the selector items for the voltage regulator.
+            minItems: 2
+            maxItems: 16
+
+          off-on-delay-us:
+            description: Time required for changing state to enabled in microseconds.
+
+          startup-delay-us:
+            description: Startup time in microseconds.
+
+          idle-mode-mask:
+            description: Bitmask used to put the regulator on idle mode.
+
+          eco-microamp:
+            description: Maximum current while on idle mode.
+
+        required:
+          - reg
+          - vsel-reg
+          - enable-mask
+          - voltage-table
+          - off-on-delay-us
+          - startup-delay-us
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+examples:
+  - |
+    /* pmic properties */
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      gpios = <&gpio28 0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: ldo3@16 {
+          reg = <0x16>;
+          vsel-reg = <0x51>;
+
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+
+          enable-mask = <0x01>;
+
+          voltage-table = <1500000>, <1550000>, <1600000>, <1650000>,
+                          <1700000>, <1725000>, <1750000>, <1775000>,
+                          <1800000>, <1825000>, <1850000>, <1875000>,
+                          <1900000>, <1925000>, <1950000>, <2000000>;
+          off-on-delay-us = <20000>;
+          startup-delay-us = <120>;
+        };
+
+        ldo4: ldo4@17 { /* 40 PIN */
+          reg = <0x17>;
+          vsel-reg = <0x52>;
+
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+
+          enable-mask = <0x01>;
+          idle-mode-mask = <0x10>;
+          eco-microamp = <10000>;
+
+          hi6421-vsel = <0x52 0x07>;
+          voltage-table = <1725000>, <1750000>, <1775000>, <1800000>,
+                          <1825000>, <1850000>, <1875000>, <1900000>;
+          off-on-delay-us = <20000>;
+          startup-delay-us = <120>;
+        };
+      };
+    };

diff --git a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
new file mode 100644 (file)
index 0000000..b1cfa9c
--- /dev/null
+++ b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+  It is a MIPI System Power Management (SPMI) controller.
+
+  The PMIC part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+properties:
+  $nodename:
+    pattern: "spmi@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,kirin970-spmi-controller
+
+  reg:
+    maxItems: 1
+
+  spmi-channel:
+    description: |
+      number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - spmi-channel
+
+patternProperties:
+  "^pmic@[0-9a-f]$":
+    description: |
+      PMIC properties, which are specific to the used SPMI PMIC device(s).
+      When used in combination with HiSilicon 6421v600, the properties
+      are documented at
+      Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      spmi: spmi@fff24000 {
+        compatible = "hisilicon,kirin970-spmi-controller";
+        status = "ok";
+        reg = <0x0 0xfff24000 0x0 0x1000>;
+        spmi-channel = <2>;
+
+        pmic@0 {
+          /* pmic properties */
+        };
+      };
+    };