net: phy: Add MDIO PCS 2.5G and 5G speed macros from Linux

Add MDIO PCS 2.5G and 5G speed macros from Linux 5.1.y as of commit
7fd8afa8933a0 ("net: phy: Add generic support for 2.5GBaseT and 5GBaseT")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6e821d9..b7c8451 100644 (file)
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -44,6 +44,7 @@
 #define MDIO_AN_ADVERTISE      16      /* AN advertising (base page) */
 #define MDIO_AN_LPA            19      /* AN LP abilities (base page) */
 #define MDIO_PCS_EEE_ABLE      20      /* EEE Capability register */
+#define MDIO_PMA_NG_EXTABLE    21      /* 2.5G/5G PMA/PMD extended ability */
 #define MDIO_PCS_EEE_WK_ERR    22      /* EEE wake error counter */
 #define MDIO_PHYXS_LNSTAT      24      /* PHY XGXS lane state */
 #define MDIO_AN_EEE_ADV                60      /* EEE advertisement */
@@ -91,6 +92,10 @@
 #define MDIO_CTRL1_SPEED10G            (MDIO_CTRL1_SPEEDSELEXT | 0x00)
 /* 10PASS-TS/2BASE-TL */
 #define MDIO_CTRL1_SPEED10P2B          (MDIO_CTRL1_SPEEDSELEXT | 0x04)
+/* 2.5 Gb/s */
+#define MDIO_CTRL1_SPEED2_5G           (MDIO_CTRL1_SPEEDSELEXT | 0x18)
+/* 5 Gb/s */
+#define MDIO_CTRL1_SPEED5G             (MDIO_CTRL1_SPEEDSELEXT | 0x1c)
 
 /* Status register 1. */
 #define MDIO_STAT1_LPOWERABLE          0x0002  /* Low-power ability */
@@ -111,6 +116,8 @@
 #define MDIO_PMA_SPEED_100             0x0020  /* 100M capable */
 #define MDIO_PMA_SPEED_10              0x0040  /* 10M capable */
 #define MDIO_PCS_SPEED_10P2B           0x0002  /* 10PASS-TS/2BASE-TL capable */
+#define MDIO_PCS_SPEED_2_5G            0x0040  /* 2.5G capable */
+#define MDIO_PCS_SPEED_5G              0x0080  /* 5G capable */
 
 /* Device present registers. */
 #define MDIO_DEVS_PRESENT(devad)       (1 << (devad))
@@ -150,6 +157,8 @@
 #define MDIO_PMA_CTRL2_1000BKX         0x000d  /* 1000BASE-KX type */
 #define MDIO_PMA_CTRL2_100BTX          0x000e  /* 100BASE-TX type */
 #define MDIO_PMA_CTRL2_10BT            0x000f  /* 10BASE-T type */
+#define MDIO_PMA_CTRL2_2_5GBT          0x0030  /* 2.5GBaseT type */
+#define MDIO_PMA_CTRL2_5GBT            0x0031  /* 5GBaseT type */
 #define MDIO_PCS_CTRL2_TYPE            0x0003  /* PCS type selection */
 #define MDIO_PCS_CTRL2_10GBR           0x0000  /* 10GBASE-R type */
 #define MDIO_PCS_CTRL2_10GBX           0x0001  /* 10GBASE-X type */
@@ -203,6 +212,7 @@
 #define MDIO_PMA_EXTABLE_1000BKX       0x0040  /* 1000BASE-KX ability */
 #define MDIO_PMA_EXTABLE_100BTX                0x0080  /* 100BASE-TX ability */
 #define MDIO_PMA_EXTABLE_10BT          0x0100  /* 10BASE-T ability */
+#define MDIO_PMA_EXTABLE_NBT           0x4000  /* 2.5/5GBASE-T ability */
 
 /* PHY XGXS lane state register. */
 #define MDIO_PHYXS_LNSTAT_SYNC0                0x0001
@@ -239,9 +249,13 @@
 #define MDIO_PCS_10GBRT_STAT2_BER      0x3f00
 
 /* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV2_5G     0x0080  /* Advertise 2.5GBASE-T */
+#define MDIO_AN_10GBT_CTRL_ADV5G       0x0100  /* Advertise 5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV10G      0x1000  /* Advertise 10GBASE-T */
 
 /* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LP2_5G      0x0020  /* LP is 2.5GBT capable */
+#define MDIO_AN_10GBT_STAT_LP5G                0x0040  /* LP is 5GBT capable */
 #define MDIO_AN_10GBT_STAT_LPTRR       0x0200  /* LP training reset req. */
 #define MDIO_AN_10GBT_STAT_LPLTABLE    0x0400  /* LP loop timing ability */
 #define MDIO_AN_10GBT_STAT_LP10G       0x0800  /* LP is 10GBT capable */
@@ -270,6 +284,10 @@
 #define MDIO_EEE_10GKX4                0x0020  /* 10G KX4 EEE cap */
 #define MDIO_EEE_10GKR         0x0040  /* 10G KR EEE cap */
 
+/* 2.5G/5G Extended abilities register. */
+#define MDIO_PMA_NG_EXTABLE_2_5GBT     0x0001  /* 2.5GBASET ability */
+#define MDIO_PMA_NG_EXTABLE_5GBT       0x0002  /* 5GBASET ability */
+
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT     0x0001  /* PHY XS RX local fault */
 #define MDIO_PMA_LASI_RX_PCSLFLT       0x0008  /* PCS RX local fault */