drivers/net/qla3xxx: trim trailing whitespace
authorJeff Garzik <jeff@garzik.org>
Wed, 3 Oct 2007 17:52:23 +0000 (13:52 -0400)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:54:29 +0000 (16:54 -0700)
Also, hopefully, change the file permissions to 0644.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/net/qla3xxx.c [changed mode: 0755->0644]
drivers/net/qla3xxx.h [changed mode: 0755->0644]

old mode 100755 (executable)
new mode 100644 (file)
index 48069ec..30adf72
@@ -81,7 +81,7 @@ typedef enum {
 } PHY_DEVICE_et;
 
 typedef struct {
-       PHY_DEVICE_et phyDevice; 
+       PHY_DEVICE_et phyDevice;
        u32             phyIdOUI;
        u16             phyIdModel;
        char            *name;
@@ -330,7 +330,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
                                             PCI_DMA_FROMDEVICE);
                        err = pci_dma_mapping_error(map);
                        if(err) {
-                               printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+                               printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                                       qdev->ndev->name, err);
                                dev_kfree_skb(lrg_buf_cb->skb);
                                lrg_buf_cb->skb = NULL;
@@ -884,14 +884,14 @@ static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev)
        u16 reg;
 
        /* Enable Auto-negotiation sense */
-       ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg, 
+       ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
                           PHYAddr[qdev->mac_index]);
        reg |= PETBI_TBI_AUTO_SENSE;
-       ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, 
+       ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
                            PHYAddr[qdev->mac_index]);
 
        ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
-                           PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, 
+                           PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
                            PHYAddr[qdev->mac_index]);
 
        ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
@@ -945,7 +945,7 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
        ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr);
        /* Write new PHYAD w/bit 5 set */
        ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr);
-       /* 
+       /*
         * Disable diagnostic mode bit 2 = 0
         * Power up device bit 11 = 0
         * Link up (on) and activity (blink)
@@ -955,18 +955,18 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
        ql_mii_write_reg(qdev, 0x1c, 0xfaf0);
 }
 
-static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev, 
+static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
                                 u16 phyIdReg0, u16 phyIdReg1)
 {
        PHY_DEVICE_et result = PHY_TYPE_UNKNOWN;
-       u32   oui;     
+       u32   oui;
        u16   model;
-       int i;   
+       int i;
 
        if (phyIdReg0 == 0xffff) {
                return result;
        }
-   
+
        if (phyIdReg1 == 0xffff) {
                return result;
        }
@@ -984,7 +984,7 @@ static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
 
                        printk(KERN_INFO "%s: Phy: %s\n",
                                qdev->ndev->name, PHY_DEVICES[i].name);
-                       
+
                        break;
                }
        }
@@ -1033,7 +1033,7 @@ static int ql_is_full_dup(struct ql3_adapter *qdev)
        {
                if (ql_mii_read_reg(qdev, 0x1A, &reg))
                        return 0;
-                       
+
                return ((reg & 0x0080) && (reg & 0x1000)) != 0;
        }
        case PHY_VITESSE_VSC8211:
@@ -1082,19 +1082,19 @@ static int PHY_Setup(struct ql3_adapter *qdev)
        /*  Check if we have a Agere PHY */
        if ((reg1 == 0xffff) || (reg2 == 0xffff)) {
 
-               /* Determine which MII address we should be using 
+               /* Determine which MII address we should be using
                   determined by the index of the card */
                if (qdev->mac_index == 0) {
                        miiAddr = MII_AGERE_ADDR_1;
                } else {
                        miiAddr = MII_AGERE_ADDR_2;
                }
-      
+
                err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, &reg1, miiAddr);
                if(err != 0) {
                        printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
                               qdev->ndev->name);
-                       return err; 
+                       return err;
                }
 
                err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, &reg2, miiAddr);
@@ -1103,9 +1103,9 @@ static int PHY_Setup(struct ql3_adapter *qdev)
                               qdev->ndev->name);
                        return err;
                }
-   
+
                /*  We need to remember to initialize the Agere PHY */
-               agereAddrChangeNeeded = true; 
+               agereAddrChangeNeeded = true;
        }
 
        /*  Determine the particular PHY we have on board to apply
@@ -1114,7 +1114,7 @@ static int PHY_Setup(struct ql3_adapter *qdev)
 
        if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) {
                /* need this here so address gets changed */
-               phyAgereSpecificInit(qdev, miiAddr);  
+               phyAgereSpecificInit(qdev, miiAddr);
        } else if (qdev->phyType == PHY_TYPE_UNKNOWN) {
                printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name);
                return -EIO;
@@ -1427,7 +1427,7 @@ static int ql_this_adapter_controls_port(struct ql3_adapter *qdev)
 
 static void ql_phy_reset_ex(struct ql3_adapter *qdev)
 {
-       ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, 
+       ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
                            PHYAddr[qdev->mac_index]);
 }
 
@@ -1438,7 +1438,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
 
        if(qdev->phyType == PHY_AGERE_ET1011C) {
                /* turn off external loopback */
-               ql_mii_write_reg(qdev, 0x13, 0x0000); 
+               ql_mii_write_reg(qdev, 0x13, 0x0000);
        }
 
        if(qdev->mac_index == 0)
@@ -1452,23 +1452,23 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
                portConfiguration = PORT_CONFIG_DEFAULT;
 
        /* Set the 1000 advertisements */
-       ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg, 
+       ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
                           PHYAddr[qdev->mac_index]);
        reg &= ~PHY_GIG_ALL_PARAMS;
 
-       if(portConfiguration & 
+       if(portConfiguration &
           PORT_CONFIG_FULL_DUPLEX_ENABLED &
           PORT_CONFIG_1000MB_SPEED) {
                reg |= PHY_GIG_ADV_1000F;
        }
-        
-       if(portConfiguration & 
+
+       if(portConfiguration &
           PORT_CONFIG_HALF_DUPLEX_ENABLED &
           PORT_CONFIG_1000MB_SPEED) {
                reg |= PHY_GIG_ADV_1000H;
        }
 
-       ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg, 
+       ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
                            PHYAddr[qdev->mac_index]);
 
        /* Set the 10/100 & pause negotiation advertisements */
@@ -1482,7 +1482,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
        if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) {
                if(portConfiguration & PORT_CONFIG_100MB_SPEED)
                        reg |= PHY_NEG_ADV_100F;
-               
+
                if(portConfiguration & PORT_CONFIG_10MB_SPEED)
                        reg |= PHY_NEG_ADV_10F;
        }
@@ -1490,22 +1490,22 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
        if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) {
                if(portConfiguration & PORT_CONFIG_100MB_SPEED)
                        reg |= PHY_NEG_ADV_100H;
-               
+
                if(portConfiguration & PORT_CONFIG_10MB_SPEED)
                        reg |= PHY_NEG_ADV_10H;
        }
 
        if(portConfiguration &
           PORT_CONFIG_1000MB_SPEED) {
-               reg |= 1;       
+               reg |= 1;
        }
 
-       ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg, 
+       ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
                            PHYAddr[qdev->mac_index]);
 
        ql_mii_read_reg_ex(qdev, CONTROL_REG, &reg, PHYAddr[qdev->mac_index]);
-       
-       ql_mii_write_reg_ex(qdev, CONTROL_REG, 
+
+       ql_mii_write_reg_ex(qdev, CONTROL_REG,
                            reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG,
                            PHYAddr[qdev->mac_index]);
 }
@@ -1660,7 +1660,7 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
                               "%s: Reset in progress, skip processing link "
                               "state.\n", qdev->ndev->name);
 
-               spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);               
+               spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
                return;
        }
 
@@ -1752,7 +1752,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
                return -1;
 
        if (qdev->device_id == QL3032_DEVICE_ID)
-               ql_write_page0_reg(qdev, 
+               ql_write_page0_reg(qdev,
                        &port_regs->macMIIMgmtControlReg, 0x0f00000);
 
        /* Divide 125MHz clock by 28 to meet PHY timing requirements */
@@ -1936,7 +1936,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
 
                                err = pci_dma_mapping_error(map);
                                if(err) {
-                                       printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+                                       printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                                               qdev->ndev->name, err);
                                        dev_kfree_skb(lrg_buf_cb->skb);
                                        lrg_buf_cb->skb = NULL;
@@ -2044,7 +2044,7 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
        if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
                printk(KERN_WARNING "Frame short but, frame was padded and sent.\n");
        }
-       
+
        tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
 
        /*  Check the transmit response flags for any errors */
@@ -2108,13 +2108,13 @@ static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev)
 
 /*
  * The difference between 3022 and 3032 for inbound completions:
- * 3022 uses two buffers per completion.  The first buffer contains 
- * (some) header info, the second the remainder of the headers plus 
- * the data.  For this chip we reserve some space at the top of the 
- * receive buffer so that the header info in buffer one can be 
- * prepended to the buffer two.  Buffer two is the sent up while 
+ * 3022 uses two buffers per completion.  The first buffer contains
+ * (some) header info, the second the remainder of the headers plus
+ * the data.  For this chip we reserve some space at the top of the
+ * receive buffer so that the header info in buffer one can be
+ * prepended to the buffer two.  Buffer two is the sent up while
  * buffer one is returned to the hardware to be reused.
- * 3032 receives all of it's data and headers in one buffer for a 
+ * 3032 receives all of it's data and headers in one buffer for a
  * simpler process.  3032 also supports checksum verification as
  * can be seen in ql_process_macip_rx_intr().
  */
@@ -2205,13 +2205,13 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
                                                 skb_push(skb2, size), size);
        } else {
                u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
-               if (checksum & 
-                       (IB_IP_IOCB_RSP_3032_ICE | 
-                        IB_IP_IOCB_RSP_3032_CE)) { 
+               if (checksum &
+                       (IB_IP_IOCB_RSP_3032_ICE |
+                        IB_IP_IOCB_RSP_3032_CE)) {
                        printk(KERN_ERR
                               "%s: Bad checksum for this %s packet, checksum = %x.\n",
                               __func__,
-                              ((checksum & 
+                              ((checksum &
                                IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
                                "UDP"),checksum);
                } else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
@@ -2394,12 +2394,12 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
 }
 
 /*
- * Get the total number of segments needed for the 
+ * Get the total number of segments needed for the
  * given number of fragments.  This is necessary because
  * outbound address lists (OAL) will be used when more than
- * two frags are given.  Each address list has 5 addr/len 
+ * two frags are given.  Each address list has 5 addr/len
  * pairs.  The 5th pair in each AOL is used to  point to
- * the next AOL if more frags are coming.  
+ * the next AOL if more frags are coming.
  * That is why the frags:segment count  ratio is not linear.
  */
 static int ql_get_seg_count(struct ql3_adapter *qdev,
@@ -2476,12 +2476,12 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
        err = pci_dma_mapping_error(map);
        if(err) {
-               printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", 
+               printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
                       qdev->ndev->name, err);
 
                return NETDEV_TX_BUSY;
        }
-       
+
        oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
        oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
        oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
@@ -2511,7 +2511,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
                                err = pci_dma_mapping_error(map);
                                if(err) {
 
-                                       printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n", 
+                                       printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
                                               qdev->ndev->name, err);
                                        goto map_error;
                                }
@@ -2537,7 +2537,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
                        err = pci_dma_mapping_error(map);
                        if(err) {
-                               printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n", 
+                               printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
                                       qdev->ndev->name, err);
                                goto map_error;
                        }
@@ -2558,10 +2558,10 @@ static int ql_send_map(struct ql3_adapter *qdev,
 
 map_error:
        /* A PCI mapping failed and now we will need to back out
-        * We need to traverse through the oal's and associated pages which 
+        * We need to traverse through the oal's and associated pages which
         * have been mapped and now we must unmap them to clean up properly
         */
-       
+
        seg = 1;
        oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
        oal = tx_cb->oal;
@@ -2599,11 +2599,11 @@ map_error:
  * The difference between 3022 and 3032 sends:
  * 3022 only supports a simple single segment transmission.
  * 3032 supports checksumming and scatter/gather lists (fragments).
- * The 3032 supports sglists by using the 3 addr/len pairs (ALP) 
- * in the IOCB plus a chain of outbound address lists (OAL) that 
- * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th) 
- * will used to point to an OAL when more ALP entries are required.  
- * The IOCB is always the top of the chain followed by one or more 
+ * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
+ * in the IOCB plus a chain of outbound address lists (OAL) that
+ * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th)
+ * will used to point to an OAL when more ALP entries are required.
+ * The IOCB is always the top of the chain followed by one or more
  * OALs (when necessary).
  */
 static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
@@ -2617,14 +2617,14 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
        if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
                return NETDEV_TX_BUSY;
        }
-       
+
        tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
        if((tx_cb->seg_count = ql_get_seg_count(qdev,
                                                (skb_shinfo(skb)->nr_frags))) == -1) {
                printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
                return NETDEV_TX_OK;
        }
-       
+
        mac_iocb_ptr = tx_cb->queue_entry;
        memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
        mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
@@ -2636,12 +2636,12 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
        if (qdev->device_id == QL3032_DEVICE_ID &&
            skb->ip_summed == CHECKSUM_PARTIAL)
                ql_hw_csum_setup(skb, mac_iocb_ptr);
-       
+
        if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
                printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
                return NETDEV_TX_BUSY;
        }
-       
+
        wmb();
        qdev->req_producer_index++;
        if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
@@ -2739,7 +2739,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
                       "%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name);
                return -ENOMEM;
        }
-       
+
        qdev->lrg_buf_q_alloc_virt_addr =
            pci_alloc_consistent(qdev->pdev,
                                 qdev->lrg_buf_q_alloc_size,
old mode 100755 (executable)
new mode 100644 (file)
index 483840f..fbcb0b9
@@ -556,7 +556,7 @@ enum {
        IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007,
        IP_ADDR_INDEX_REG_6 = 0x0008,
        IP_ADDR_INDEX_REG_OFFSET_MASK = 0x0030,
-       IP_ADDR_INDEX_REG_E = 0x0040, 
+       IP_ADDR_INDEX_REG_E = 0x0040,
 };
 enum {
        QL3032_PORT_CONTROL_DS = 0x0001,
@@ -1112,7 +1112,7 @@ struct ql_rcv_buf_cb {
  * OAL has 5 entries:
  * 1 thru 4 point to frags
  * fifth points to next oal.
- */ 
+ */
 #define MAX_OAL_CNT ((MAX_SKB_FRAGS-1)/4 + 1)
 
 struct oal_entry {
@@ -1137,7 +1137,7 @@ struct ql_tx_buf_cb {
        struct ob_mac_iocb_req *queue_entry ;
        int seg_count;
        struct oal *oal;
-       struct map_list map[MAX_SKB_FRAGS+1]; 
+       struct map_list map[MAX_SKB_FRAGS+1];
 };
 
 /* definitions for type field */