This enables support for the Wind River MIPS32 4KC PPMC evaluation
board, which is based on GT64120 bridge chip.
-config CAVIUM_OCTEON_SIMULATOR
- bool "Cavium Networks Octeon Simulator"
- select CEVT_R4K
- select 64BIT_PHYS_ADDR
- select DMA_COHERENT
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HOTPLUG_CPU
- select SYS_HAS_CPU_CAVIUM_OCTEON
- select HOLES_IN_ZONE
- help
- The Octeon simulator is software performance model of the Cavium
- Octeon Processor. It supports simulating Octeon processors on x86
- hardware.
-
-config CAVIUM_OCTEON_REFERENCE_BOARD
- bool "Cavium Networks Octeon reference board"
+config CAVIUM_OCTEON_SOC
+ bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
non-CN63XXP1 hardware, so it is recommended to select "n"
unless it is known the workarounds are needed.
+endif # CPU_CAVIUM_OCTEON
+
+if CAVIUM_OCTEON_SOC
+
config CAVIUM_OCTEON_2ND_KERNEL
bool "Build the kernel to be used as a 2nd kernel on the same chip"
default "n"
To compile this driver as a module, choose M here. The module
will be called octeon-ilm
-endif # CPU_CAVIUM_OCTEON
+endif # CAVIUM_OCTEON_SOC
#
# Cavium Octeon
#
-platform-$(CONFIG_CPU_CAVIUM_OCTEON) += cavium-octeon/
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += \
+platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/
+cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \
-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff84100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff84100000
else
-load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000
endif
-CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
+CONFIG_CAVIUM_OCTEON_SOC=y
CONFIG_CAVIUM_CN63XXP1=y
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
CONFIG_SPARSEMEM_MANUAL=y
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_CAVIUM_OCTEON_SOC) += pci-octeon.o pcie-octeon.o
obj-$(CONFIG_CPU_XLR) += pci-xlr.o
obj-$(CONFIG_CPU_XLP) += pci-xlp.o
ifdef CONFIG_PCI_MSI
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
+obj-$(CONFIG_CAVIUM_OCTEON_SOC) += msi-octeon.o
endif
config PATA_OCTEON_CF
tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
help
This option enables a polled compact flash driver for use with
compact flash cards attached to the OCTEON boot bus.
config HW_RANDOM_OCTEON
tristate "Octeon Random Number Generator support"
- depends on HW_RANDOM && CPU_CAVIUM_OCTEON
+ depends on HW_RANDOM && CAVIUM_OCTEON_SOC
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
config EDAC_OCTEON_L2C
tristate "Cavium Octeon Secondary Caches (L2C)"
- depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+ depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
help
Support for error detection and correction on the
Cavium Octeon family of SOCs.
config EDAC_OCTEON_LMC
tristate "Cavium Octeon DRAM Memory Controller (LMC)"
- depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+ depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
help
Support for error detection and correction on the
Cavium Octeon family of SOCs.
config EDAC_OCTEON_PCI
tristate "Cavium Octeon PCI Controller"
- depends on EDAC_MM_EDAC && PCI && CPU_CAVIUM_OCTEON
+ depends on EDAC_MM_EDAC && PCI && CAVIUM_OCTEON_SOC
help
Support for error detection and correction on the
Cavium Octeon family of SOCs.
config I2C_OCTEON
tristate "Cavium OCTEON I2C bus support"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
help
Say yes if you want to support the I2C serial bus on Cavium
OCTEON SOC.
config OCTEON_MGMT_ETHERNET
tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
select PHYLIB
select MDIO_OCTEON
default y
config MDIO_OCTEON
tristate "Support for MDIO buses on Octeon SOCs"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
default y
help
config SPI_OCTEON
tristate "Cavium OCTEON SPI controller"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
help
SPI host driver for the hardware found on some Cavium OCTEON
SOCs.
config OCTEON_ETHERNET
tristate "Cavium Networks Octeon Ethernet support"
- depends on CPU_CAVIUM_OCTEON && NETDEVICES
+ depends on CAVIUM_OCTEON_SOC && NETDEVICES
select PHYLIB
select MDIO_OCTEON
help
config USB_OCTEON_EHCI
bool "Octeon on-chip EHCI support"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
default n
select USB_EHCI_BIG_ENDIAN_MMIO
help
config USB_OCTEON_OHCI
bool "Octeon on-chip OHCI support"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
default USB_OCTEON_EHCI
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_OHCI_LITTLE_ENDIAN
config OCTEON_WDT
tristate "Cavium OCTEON SOC family Watchdog Timer"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
default y
select EXPORT_UASM if OCTEON_WDT = m
help