2005-01-24 Andrew Cagney <cagney@gnu.org>
+ * infrun.c (handle_inferior_event): Handle back-to-back and nested
+ signals where the step_resume_breakpoint may have already been
+ inserted.
+
+2005-01-24 Andrew Cagney <cagney@gnu.org>
+
* configure: Regenerate, ../gettext.m4 was updated.
2005-01-23 Mark Kettenis <kettenis@gnu.org>
breakpoint. */
insert_step_resume_breakpoint_at_frame (get_current_frame ());
ecs->step_after_step_resume_breakpoint = 1;
+ keep_going (ecs);
+ return;
}
- else if (step_range_end != 0
- && stop_signal != TARGET_SIGNAL_0
- && stop_pc >= step_range_start && stop_pc < step_range_end
- && frame_id_eq (get_frame_id (get_current_frame ()),
- step_frame_id))
+
+ if (step_range_end != 0
+ && stop_signal != TARGET_SIGNAL_0
+ && stop_pc >= step_range_start && stop_pc < step_range_end
+ && frame_id_eq (get_frame_id (get_current_frame ()),
+ step_frame_id)
+ && step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ keep_going (ecs);
+ return;
}
+
+ /* Note: step_resume_breakpoint may be non-NULL. This occures
+ when either there's a nested signal, or when there's a
+ pending signal enabled just as the signal handler returns
+ (leaving the inferior at the step-resume-breakpoint without
+ actually executing it). Either way continue until the
+ breakpoint is really hit. */
keep_going (ecs);
return;
}
+2005-01-24 Andrew Cagney <cagney@gnu.org>
+
+ * gdb.base/sigrepeat.exp, gdb.base/sigrepeat.c: New test.
+
2005-01-19 Andrew Cagney <cagney@gnu.org>
* gdb.stabs/Makefile.in (Makefile): Update dependencies -
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2004, 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+*/
+
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/time.h>
+
+static volatile int done[2];
+static volatile int repeats[2];
+static int itimer[2] = { ITIMER_REAL, ITIMER_VIRTUAL };
+static int alarm[2] = { SIGALRM, SIGVTALRM };
+
+static void
+handler (int sig)
+{
+ int sigi;
+ switch (sig)
+ {
+ case SIGALRM: sigi = 0; break;
+ case SIGVTALRM: sigi = 1; break;
+ default: abort ();
+ }
+ if (repeats[sigi]++ > 3)
+ {
+ /* Hit with enough signals, cancel everything and get out. */
+ {
+ struct itimerval itime;
+ memset (&itime, 0, sizeof (itime));
+ setitimer (itimer[sigi], &itime, NULL);
+ }
+ {
+ struct sigaction action;
+ memset (&action, 0, sizeof (action));
+ action.sa_handler = SIG_IGN;
+ sigaction (sig, &action, NULL);
+ }
+ done[sigi] = 1;
+ return;
+ }
+ /* Set up a nested virtual timer. */
+ while (1)
+ {
+ /* Wait until a signal has become pending, that way when this
+ handler returns it will be immediatly delivered leading to
+ back-to-back signals. */
+ sigset_t set;
+ sigemptyset (&set);
+ if (sigpending (&set) < 0)
+ {
+ perror ("sigrepeat");
+ abort ();
+ }
+ if (sigismember (&set, sig))
+ break;
+ }
+} /* handler */
+
+main ()
+{
+ int i;
+ /* Set up the signal handler. */
+ for (i = 0; i < 2; i++)
+ {
+ struct sigaction action;
+ memset (&action, 0, sizeof (action));
+ action.sa_handler = handler;
+ sigaction (alarm[i], &action, NULL);
+ }
+
+ /* Set up a rapidly repeating timers. A timer, rather than SIGSEGV,
+ is used as after a timer handler returns the interrupted code can
+ safely resume. The intent is for the program to swamp GDB with a
+ backlog of pending signals. */
+ for (i = 0; i < 2; i++)
+ {
+ struct itimerval itime;
+ memset (&itime, 0, sizeof (itime));
+ itime.it_interval.tv_usec = 1;
+ itime.it_value.tv_usec = 250 * 1000;
+ setitimer (itimer[i], &itime, NULL);
+ }
+
+ /* Wait. */
+ while (!done[0] && !done[1]); /* infinite loop */
+ return 0;
+}
--- /dev/null
+# Copyright 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+
+# The program sigrepeat.c creates a repeating timer and then waits for
+# it to fire multiple times. The objective is to create a backlog if
+# sigalrm signals and hence cause repeated signal delivery without any
+# cpu advancment.
+
+if [target_info exists gdb,nosignals] {
+ verbose "Skipping sigstep.exp because of nosignals."
+ continue
+}
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile sigrepeat
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ untested "Couldn't compile ${module}.c"
+ return -1
+}
+
+# get things started
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Advance to main
+if { ![runto_main] } then {
+ gdb_suppress_tests;
+}
+
+# Run to the signal handler wait loop.
+set infinite_loop [gdb_get_line_number {infinite loop}]
+gdb_test "advance $infinite_loop" "" "advance to infinite loop"
+
+# Make the first of many signals come pending
+sleep 1
+
+# Try to step off this line
+gdb_test "next" "return 0;.*"
projects / external / binutils.git / commitdiff