USB: serial: pl2303: clean up legacy endpoint hack

Implement the "horrible endpoint hack" for some legacy devices as a
quirk and clean up the code somewhat.

Note that the bulk-endpoint check can be removed as core will already
have verified this.

Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b8edd7b..c9ebefd 100644 (file)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -33,9 +33,11 @@
 
 #define PL2303_QUIRK_UART_STATE_IDX0           BIT(0)
 #define PL2303_QUIRK_LEGACY                    BIT(1)
+#define PL2303_QUIRK_ENDPOINT_HACK             BIT(2)
 
 static const struct usb_device_id id_table[] = {
-       { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
+       { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),
+               .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
@@ -48,7 +50,8 @@ static const struct usb_device_id id_table[] = {
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
        { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
        { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
-       { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+       { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
+               .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
        { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
        { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
        { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
@@ -68,7 +71,8 @@ static const struct usb_device_id id_table[] = {
                .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
        { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
                .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
-       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),
+               .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
        { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
        { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
@@ -78,7 +82,8 @@ static const struct usb_device_id id_table[] = {
        { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
        { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
        { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
-       { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+       { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),
+               .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
        { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
        { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
        { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
@@ -218,7 +223,12 @@ static int pl2303_probe(struct usb_serial *serial,
        return 0;
 }
 
-static int pl2303_calc_num_ports(struct usb_serial *serial,
+/*
+ * Use interrupt endpoint from first interface if available.
+ *
+ * This is needed due to the looney way its endpoints are set up.
+ */
+static int pl2303_endpoint_hack(struct usb_serial *serial,
                                        struct usb_serial_endpoints *epds)
 {
        struct usb_interface *interface = serial->interface;
@@ -228,43 +238,41 @@ static int pl2303_calc_num_ports(struct usb_serial *serial,
        struct usb_endpoint_descriptor *endpoint;
        unsigned int i;
 
-       /* BEGIN HORRIBLE HACK FOR PL2303 */
-       /* this is needed due to the looney way its endpoints are set up */
-       if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
-            (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
-           ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
-            (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
-           ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
-            (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
-           ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
-            (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
-               if (interface != dev->actconfig->interface[0]) {
-                       /* check out the endpoints of the other interface*/
-                       iface_desc = dev->actconfig->interface[0]->cur_altsetting;
-                       for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
-                               endpoint = &iface_desc->endpoint[i].desc;
-                               if (usb_endpoint_is_int_in(endpoint)) {
-                                       /* we found a interrupt in endpoint */
-                                       dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
-                                       if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
-                                               epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
-                               }
-                       }
-               }
+       if (interface == dev->actconfig->interface[0])
+               return 0;
 
-               /* Now make sure the PL-2303 is configured correctly.
-                * If not, give up now and hope this hack will work
-                * properly during a later invocation of usb_serial_probe
-                */
-               if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) {
-                       dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
-                       return -ENODEV;
-               }
+       /* check out the endpoints of the other interface */
+       iface_desc = dev->actconfig->interface[0]->cur_altsetting;
+
+       for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+               endpoint = &iface_desc->endpoint[i].desc;
+
+               if (!usb_endpoint_is_int_in(endpoint))
+                       continue;
+
+               dev_dbg(ddev, "found interrupt in on separate interface\n");
+               if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
+                       epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
+       }
+
+       return 0;
+}
+
+static int pl2303_calc_num_ports(struct usb_serial *serial,
+                                       struct usb_serial_endpoints *epds)
+{
+       unsigned long quirks = (unsigned long)usb_get_serial_data(serial);
+       struct device *dev = &serial->interface->dev;
+       int ret;
+
+       if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {
+               ret = pl2303_endpoint_hack(serial, epds);
+               if (ret)
+                       return ret;
        }
-       /* END HORRIBLE HACK FOR PL2303 */
 
        if (epds->num_interrupt_in < 1) {
-               dev_err(ddev, "required interrupt-in endpoint missing\n");
+               dev_err(dev, "required interrupt-in endpoint missing\n");
                return -ENODEV;
        }