Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
const struct attribute_group **attr_groups;
int n_generic;
int *generic_events;
- int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+ u64 (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
static int hw_perf_cache_event(u64 config, u64 *eventp)
{
unsigned long type, op, result;
- int ev;
+ u64 ev;
if (!ppmu->cache_events)
return -EINVAL;
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0,
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x225 },
[C(OP_WRITE)] = { 0, 0x227 },
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x1c10a8, 0x3c1088 },
[C(OP_WRITE)] = { 0x2c10a8, 0xc10c3 },
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x4c1090, 0x3c1088 },
[C(OP_WRITE)] = { 0x3c1090, 0xc10c3 },
* are event codes.
* The "DTLB" and "ITLB" events relate to the DERAT and IERAT.
*/
-static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x280030, 0x80080 },
[C(OP_WRITE)] = { 0x180032, 0x80088 },
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0xc880, 0x400f0 },
[C(OP_WRITE)] = { 0, 0x300f0 },
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x8810, 0x3810 },
[C(OP_WRITE)] = { 0x7810, 0x813 },