enum {
STAC_925x_REF,
+ STAC_M1,
+ STAC_M1_2,
+ STAC_M2,
STAC_M2_2,
+ STAC_M3,
+ STAC_M5,
+ STAC_M6,
STAC_MA6,
STAC_PA6,
STAC_925x_MODELS
0x90a70320, 0x02214210, 0x01019020, 0x9033032e,
};
+static unsigned int stac925xM1_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+static unsigned int stac925xM1_2_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+static unsigned int stac925xM2_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+
+static unsigned int stac925xM3_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x503303f3,
+};
+static unsigned int stac925xM5_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+
+/* Original M6 entry at .ini file */
+static unsigned int stac925xM6_pin_configs[8] = {
+ 0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+ 0x40a000f0, 0x90100210, 0x400003f1, 0x90330320,
+};
+
static unsigned int stac925x_MA6_pin_configs[8] = {
0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
0x90a70320, 0x90100211, 0x400003f1, 0x9033032e,
};
+/* This entry should be M2 */
static unsigned int stac925x_PA6_pin_configs[8] = {
0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
0x50a103f0, 0x90100211, 0x400003f1, 0x9033032e,
static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = {
[STAC_REF] = ref925x_pin_configs,
+ [STAC_M1] = stac925xM1_pin_configs,
+ [STAC_M1_2] = stac925xM1_2_pin_configs,
+ [STAC_M2] = stac925xM2_pin_configs,
[STAC_M2_2] = stac925xM2_2_pin_configs,
+ [STAC_M3] = stac925xM3_pin_configs,
+ [STAC_M5] = stac925xM5_pin_configs,
+ [STAC_M6] = stac925xM6_pin_configs,
[STAC_MA6] = stac925x_MA6_pin_configs,
[STAC_PA6] = stac925x_PA6_pin_configs,
};
static const char *stac925x_models[STAC_925x_MODELS] = {
[STAC_REF] = "ref",
+ [STAC_M1] = "m1",
+ [STAC_M1_2] = "m1-2",
+ [STAC_M2] = "m2",
[STAC_M2_2] = "m2-2",
- [STAC_MA6] = "m6",
+ [STAC_M3] = "m3",
+ [STAC_M5] = "m5",
+ [STAC_M6] = "m6",
+ [STAC_MA6] = "ma6",
[STAC_PA6] = "pa6",
};
-static struct snd_pci_quirk stac925x_cfg_tbl[] = {
- /* SigmaTel reference board */
- SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF),
- SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF),
+static struct snd_pci_quirk stac925x_codec_id_cfg_tbl[] = {
SND_PCI_QUIRK(0x107b, 0x0316, "Gateway M255", STAC_REF),
SND_PCI_QUIRK(0x107b, 0x0366, "Gateway MP6954", STAC_REF),
+
SND_PCI_QUIRK(0x107b, 0x0461, "Gateway NX560XL", STAC_MA6),
SND_PCI_QUIRK(0x107b, 0x0681, "Gateway NX860", STAC_PA6),
- SND_PCI_QUIRK(0x1002, 0x437b, "Gateway MX6453", STAC_M2_2),
+ SND_PCI_QUIRK(0x107b, 0x0367, "Gateway MX6453", STAC_M1_2),
+
+ /* Not sure about the brand name for those */
+ SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M1),
+ SND_PCI_QUIRK(0x107b, 0x0507, "Gateway mobile", STAC_M3),
+ SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M6),
+ SND_PCI_QUIRK(0x107b, 0x0685, "Gateway mobile", STAC_M2_2),
+
+ {} /* terminator */
+};
+
+static struct snd_pci_quirk stac925x_cfg_tbl[] = {
+ /* SigmaTel reference board */
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF),
+ SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF),
+
+ /* Default table for unknown ID */
+ SND_PCI_QUIRK(0x1002, 0x437b, "Gateway mobile", STAC_M2_2),
+
{} /* terminator */
};
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
- spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
+
+ /* Check first for codec ID */
+ spec->board_config = snd_hda_check_board_codec_sid_config(codec,
+ STAC_925x_MODELS,
+ stac925x_models,
+ stac925x_codec_id_cfg_tbl);
+
+ /* Now checks for PCI ID, if codec ID is not found */
+ if (spec->board_config < 0)
+ spec->board_config = snd_hda_check_board_config(codec,
+ STAC_925x_MODELS,
stac925x_models,
stac925x_cfg_tbl);
again:
if (spec->board_config < 0) {
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
+ snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
"using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
} else