#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
#define DEFAULT_LIMITER_RTIME 0x1392
#define DEFAULT_LIMITER_DEV 0x102CA
-#define DEFAULT_PILOT_FREQUENCY 0x4A38
+#define DEFAULT_PILOT_FREQUENCY 0x4A38
#define DEFAULT_PILOT_DEVIATION 0x1A5E
#define DEFAULT_ACOMP_ATIME 0x0000
#define DEFAULT_ACOMP_RTIME 0xF4240L
#define DEFAULT_ACOMP_GAIN 0x0F
-#define DEFAULT_ACOMP_THRESHOLD (-0x28)
+#define DEFAULT_ACOMP_THRESHOLD (-0x28)
#define DEFAULT_MUTE 0x01
#define DEFAULT_POWER_LEVEL 88
#define DEFAULT_FREQUENCY 8800
int err;
u8 val[SI4713_GET_PROP_NRESP];
/*
- * .First byte = 0
- * .Second byte = property's MSB
- * .Third byte = property's LSB
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
*/
const u8 args[SI4713_GET_PROP_NARGS] = {
0x00,
int rval;
u8 resp[SI4713_SET_PROP_NRESP];
/*
- * .First byte = 0
- * .Second byte = property's MSB
- * .Third byte = property's LSB
- * .Fourth byte = value's MSB
- * .Fifth byte = value's LSB
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
+ * .Fourth byte = value's MSB
+ * .Fifth byte = value's LSB
*/
const u8 args[SI4713_SET_PROP_NARGS] = {
0x00,
int err;
u8 resp[SI4713_PWUP_NRESP];
/*
- * .First byte = Enabled interrupts and boot function
- * .Second byte = Input operation mode
+ * .First byte = Enabled interrupts and boot function
+ * .Second byte = Input operation mode
*/
u8 args[SI4713_PWUP_NARGS] = {
SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
/*
* si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
- * frequency between 76 and 108 MHz in 10 kHz units and
- * steps of 50 kHz.
+ * frequency between 76 and 108 MHz in 10 kHz units and
+ * steps of 50 kHz.
* @sdev: si4713_device structure for the device we are communicating
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
*/
int err;
u8 val[SI4713_TXFREQ_NRESP];
/*
- * .First byte = 0
- * .Second byte = frequency's MSB
- * .Third byte = frequency's LSB
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
*/
const u8 args[SI4713_TXFREQ_NARGS] = {
0x00,
/*
* si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
- * 1 dB units. A value of 0x00 indicates off. The command
- * also sets the antenna tuning capacitance. A value of 0
- * indicates autotuning, and a value of 1 - 191 indicates
- * a manual override, which results in a tuning
- * capacitance of 0.25 pF x @antcap.
+ * 1 dB units. A value of 0x00 indicates off. The command
+ * also sets the antenna tuning capacitance. A value of 0
+ * indicates autotuning, and a value of 1 - 191 indicates
+ * a manual override, which results in a tuning
+ * capacitance of 0.25 pF x @antcap.
* @sdev: si4713_device structure for the device we are communicating
* @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
* @antcap: value of antenna tuning capacitor (0 - 191)
int err;
u8 val[SI4713_TXPWR_NRESP];
/*
- * .First byte = 0
- * .Second byte = 0
- * .Third byte = power
- * .Fourth byte = antcap
+ * .First byte = 0
+ * .Second byte = 0
+ * .Third byte = power
+ * .Fourth byte = antcap
*/
u8 args[SI4713_TXPWR_NARGS] = {
0x00,
/*
* si4713_tx_tune_measure - Enters receive mode and measures the received noise
- * level in units of dBuV on the selected frequency.
- * The Frequency must be between 76 and 108 MHz in 10 kHz
- * units and steps of 50 kHz. The command also sets the
- * antenna tuning capacitance. A value of 0 means
- * autotuning, and a value of 1 to 191 indicates manual
- * override.
+ * level in units of dBuV on the selected frequency.
+ * The Frequency must be between 76 and 108 MHz in 10 kHz
+ * units and steps of 50 kHz. The command also sets the
+ * antenna tuning capacitance. A value of 0 means
+ * autotuning, and a value of 1 to 191 indicates manual
+ * override.
* @sdev: si4713_device structure for the device we are communicating
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
* @antcap: value of antenna tuning capacitor (0 - 191)
int err;
u8 val[SI4713_TXMEA_NRESP];
/*
- * .First byte = 0
- * .Second byte = frequency's MSB
- * .Third byte = frequency's LSB
- * .Fourth byte = antcap
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
+ * .Fourth byte = antcap
*/
const u8 args[SI4713_TXMEA_NARGS] = {
0x00,
/*
* si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
- * tx_tune_power commands. This command return the current
- * frequency, output voltage in dBuV, the antenna tunning
- * capacitance value and the received noise level. The
- * command also clears the stcint interrupt bit when the
- * first bit of its arguments is high.
+ * tx_tune_power commands. This command return the current
+ * frequency, output voltage in dBuV, the antenna tunning
+ * capacitance value and the received noise level. The
+ * command also clears the stcint interrupt bit when the
+ * first bit of its arguments is high.
* @sdev: si4713_device structure for the device we are communicating
* @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
* @frequency: returned frequency
int err;
u8 val[SI4713_TXSTATUS_NRESP];
/*
- * .First byte = intack bit
+ * .First byte = intack bit
*/
const u8 args[SI4713_TXSTATUS_NARGS] = {
intack & SI4713_INTACK_MASK,
struct v4l2_ctrl_handler *hdl;
int rval, i;
- sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+ sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
if (!sdev) {
dev_err(&client->dev, "Failed to alloc video device.\n");
rval = -ENOMEM;
V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
DEFAULT_ACOMP_GAIN);
sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD,
- MAX_ACOMP_THRESHOLD, 1,
+ V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
+ MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
DEFAULT_ACOMP_THRESHOLD);
sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
V4L2_CID_TUNE_PREEMPHASIS,
V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, 1, DEFAULT_POWER_LEVEL);
+ V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
+ 1, DEFAULT_POWER_LEVEL);
sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, 1, 0);
+ V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
+ 1, 0);
if (hdl->error) {
rval = hdl->error;
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff