ARM: dts: imx6q-tbs2910: Add an mdio node

imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4.

The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.

Improve the Ethernet representation by adding an mdio node with such
information.

This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now
expects the 'qca,clk-out-frequency' property to be passed via
device tree.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Tested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index bfff87c..1f34028 100644 (file)
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -100,7 +100,18 @@
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii-id";
        phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+       phy-handle = <&phy>;
        status = "okay";
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy: ethernet-phy@4 {
+                       reg = <4>;
+                       qca,clk-out-frequency = <125000000>;
+               };
+       };
 };
 
 &hdmi {