# store system values and test parameters
class SystemValues:
title = 'SleepGraph'
- version = '5.9'
+ version = '5.10'
ansi = False
rs = 0
display = ''
ftracelog = False
acpidebug = True
tstat = True
+ wifitrace = False
mindevlen = 0.0001
mincglen = 0.0
cgphase = ''
epath = '/sys/kernel/debug/tracing/events/power/'
pmdpath = '/sys/power/pm_debug_messages'
s0ixpath = '/sys/module/intel_pmc_core/parameters/warn_on_s0ix_failures'
+ s0ixres = '/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us'
acpipath='/sys/module/acpi/parameters/debug_level'
traceevents = [
'suspend_resume',
tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f'
tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f'
tracefuncs = {
+ 'async_synchronize_full': {},
'sys_sync': {},
'ksys_sync': {},
'__pm_notifier_call_chain': {},
[2, 'suspendstats', 'sh', '-c', 'grep -v invalid /sys/power/suspend_stats/*'],
[2, 'cpuidle', 'sh', '-c', 'grep -v invalid /sys/devices/system/cpu/cpu*/cpuidle/state*/s2idle/*'],
[2, 'battery', 'sh', '-c', 'grep -v invalid /sys/class/power_supply/*/*'],
+ [2, 'thermal', 'sh', '-c', 'grep . /sys/class/thermal/thermal_zone*/temp'],
]
cgblacklist = []
kprobes = dict()
return
if not quiet:
sysvals.printSystemInfo(False)
- pprint('INITIALIZING FTRACE...')
+ pprint('INITIALIZING FTRACE')
# turn trace off
self.fsetVal('0', 'tracing_on')
self.cleanupFtrace()
for name in self.dev_tracefuncs:
self.defaultKprobe(name, self.dev_tracefuncs[name])
if not quiet:
- pprint('INITIALIZING KPROBES...')
+ pprint('INITIALIZING KPROBES')
self.addKprobes(self.verbose)
if(self.usetraceevents):
# turn trace events on
self.cfgdef[file] = fp.read().strip()
fp.write(value)
fp.close()
+ def s0ixSupport(self):
+ if not os.path.exists(self.s0ixres) or not os.path.exists(self.mempowerfile):
+ return False
+ fp = open(sysvals.mempowerfile, 'r')
+ data = fp.read().strip()
+ fp.close()
+ if '[s2idle]' in data:
+ return True
+ return False
def haveTurbostat(self):
if not self.tstat:
return False
self.vprint(out)
return True
return False
- def turbostat(self):
+ def turbostat(self, s0ixready):
cmd = self.getExec('turbostat')
rawout = keyline = valline = ''
fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile)
for key in keyline:
idx = keyline.index(key)
val = valline[idx]
+ if key == 'SYS%LPI' and not s0ixready and re.match('^[0\.]*$', val):
+ continue
out.append('%s=%s' % (key, val))
return '|'.join(out)
def netfixon(self, net='both'):
out = ascii(fp.read()).strip()
fp.close()
return out
- def wifiRepair(self):
- out = self.netfixon('wifi')
- if not out or 'error' in out.lower():
- return ''
- m = re.match('WIFI \S* ONLINE (?P<action>\S*)', out)
- if not m:
- return 'dead'
- return m.group('action')
def wifiDetails(self, dev):
try:
info = open('/sys/class/net/%s/device/uevent' % dev, 'r').read().strip()
return '%s reconnected %.2f' % \
(self.wifiDetails(dev), max(0, time.time() - start))
time.sleep(0.01)
- if self.netfix:
- res = self.wifiRepair()
- if res:
- timeout = max(0, time.time() - start)
- return '%s %s %d' % (self.wifiDetails(dev), res, timeout)
return '%s timeout %d' % (self.wifiDetails(dev), timeout)
def errorSummary(self, errinfo, msg):
found = False
for i in self.rslist:
self.setVal(self.rstgt, i)
pprint('runtime suspend settings restored on %d devices' % len(self.rslist))
+ def start(self, pm):
+ if self.useftrace:
+ self.dlog('start ftrace tracing')
+ self.fsetVal('1', 'tracing_on')
+ if self.useprocmon:
+ self.dlog('start the process monitor')
+ pm.start()
+ def stop(self, pm):
+ if self.useftrace:
+ if self.useprocmon:
+ self.dlog('stop the process monitor')
+ pm.stop()
+ self.dlog('stop ftrace tracing')
+ self.fsetVal('0', 'tracing_on')
sysvals = SystemValues()
switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0']
ubiquitous = False
if kprobename in dtf and 'ub' in dtf[kprobename]:
ubiquitous = True
- title = cdata+' '+rdata
- mstr = '\(.*\) *(?P<args>.*) *\((?P<caller>.*)\+.* arg1=(?P<ret>.*)'
- m = re.match(mstr, title)
- if m:
- c = m.group('caller')
- a = m.group('args').strip()
- r = m.group('ret')
+ mc = re.match('\(.*\) *(?P<args>.*)', cdata)
+ mr = re.match('\((?P<caller>\S*).* arg1=(?P<ret>.*)', rdata)
+ if mc and mr:
+ c = mr.group('caller').split('+')[0]
+ a = mc.group('args').strip()
+ r = mr.group('ret')
if len(r) > 6:
r = ''
else:
r = 'ret=%s ' % r
if ubiquitous and c in dtf and 'ub' in dtf[c]:
return False
+ else:
+ return False
color = sysvals.kprobeColor(kprobename)
e = DevFunction(displayname, a, c, r, start, end, ubiquitous, proc, pid, color)
tgtdev['src'].append(e)
e.time = self.trimTimeVal(e.time, t0, dT, left)
e.end = self.trimTimeVal(e.end, t0, dT, left)
e.length = e.end - e.time
+ if('cpuexec' in d):
+ cpuexec = dict()
+ for e in d['cpuexec']:
+ c0, cN = e
+ c0 = self.trimTimeVal(c0, t0, dT, left)
+ cN = self.trimTimeVal(cN, t0, dT, left)
+ cpuexec[(c0, cN)] = d['cpuexec'][e]
+ d['cpuexec'] = cpuexec
for dir in ['suspend', 'resume']:
list = []
for e in self.errorinfo[dir]:
return d
def addProcessUsageEvent(self, name, times):
# get the start and end times for this process
- maxC = 0
- tlast = 0
- start = -1
- end = -1
+ cpuexec = dict()
+ tlast = start = end = -1
for t in sorted(times):
- if tlast == 0:
+ if tlast < 0:
tlast = t
continue
- if name in self.pstl[t]:
- if start == -1 or tlast < start:
+ if name in self.pstl[t] and self.pstl[t][name] > 0:
+ if start < 0:
start = tlast
- if end == -1 or t > end:
- end = t
+ end, key = t, (tlast, t)
+ maxj = (t - tlast) * 1024.0
+ cpuexec[key] = min(1.0, float(self.pstl[t][name]) / maxj)
tlast = t
- if start == -1 or end == -1:
- return 0
+ if start < 0 or end < 0:
+ return
# add a new action for this process and get the object
out = self.newActionGlobal(name, start, end, -3)
- if not out:
- return 0
- phase, devname = out
- dev = self.dmesg[phase]['list'][devname]
- # get the cpu exec data
- tlast = 0
- clast = 0
- cpuexec = dict()
- for t in sorted(times):
- if tlast == 0 or t <= start or t > end:
- tlast = t
- continue
- list = self.pstl[t]
- c = 0
- if name in list:
- c = list[name]
- if c > maxC:
- maxC = c
- if c != clast:
- key = (tlast, t)
- cpuexec[key] = c
- tlast = t
- clast = c
- dev['cpuexec'] = cpuexec
- return maxC
+ if out:
+ phase, devname = out
+ dev = self.dmesg[phase]['list'][devname]
+ dev['cpuexec'] = cpuexec
def createProcessUsageEvents(self):
- # get an array of process names
- proclist = []
- for t in sorted(self.pstl):
- pslist = self.pstl[t]
- for ps in sorted(pslist):
- if ps not in proclist:
- proclist.append(ps)
- # get a list of data points for suspend and resume
- tsus = []
- tres = []
+ # get an array of process names and times
+ proclist = {'sus': dict(), 'res': dict()}
+ tdata = {'sus': [], 'res': []}
for t in sorted(self.pstl):
- if t < self.tSuspended:
- tsus.append(t)
- else:
- tres.append(t)
+ dir = 'sus' if t < self.tSuspended else 'res'
+ for ps in sorted(self.pstl[t]):
+ if ps not in proclist[dir]:
+ proclist[dir][ps] = 0
+ tdata[dir].append(t)
# process the events for suspend and resume
- if len(proclist) > 0:
+ if len(proclist['sus']) > 0 or len(proclist['res']) > 0:
sysvals.vprint('Process Execution:')
- for ps in proclist:
- c = self.addProcessUsageEvent(ps, tsus)
- if c > 0:
- sysvals.vprint('%25s (sus): %d' % (ps, c))
- c = self.addProcessUsageEvent(ps, tres)
- if c > 0:
- sysvals.vprint('%25s (res): %d' % (ps, c))
+ for dir in ['sus', 'res']:
+ for ps in sorted(proclist[dir]):
+ self.addProcessUsageEvent(ps, tdata[dir])
def handleEndMarker(self, time, msg=''):
dm = self.dmesg
self.setEnd(time, msg)
# markers, and/or kprobes required for primary parsing.
def doesTraceLogHaveTraceEvents():
kpcheck = ['_cal: (', '_ret: (']
- techeck = ['suspend_resume', 'device_pm_callback']
+ techeck = ['suspend_resume', 'device_pm_callback', 'tracing_mark_write']
tmcheck = ['SUSPEND START', 'RESUME COMPLETE']
sysvals.usekprobes = False
fp = sysvals.openlog(sysvals.ftracefile, 'r')
check.remove(i)
tmcheck = check
fp.close()
- sysvals.usetraceevents = True if len(techeck) < 2 else False
+ sysvals.usetraceevents = True if len(techeck) < 3 else False
sysvals.usetracemarkers = True if len(tmcheck) == 0 else False
# Function: appendIncompleteTraceLog
continue
# process cpu exec line
if t.type == 'tracing_mark_write':
+ if t.name == 'CMD COMPLETE' and data.tKernRes == 0:
+ data.tKernRes = t.time
m = re.match(tp.procexecfmt, t.name)
if(m):
parts, msg = 1, m.group('ps')
e = next((x for x in reversed(tp.ktemp[key]) if x['end'] < 0), 0)
if not e:
continue
+ if (t.time - e['begin']) * 1000 < sysvals.mindevlen:
+ tp.ktemp[key].pop()
+ continue
e['end'] = t.time
e['rdata'] = kprobedata
# end of kernel resume
fmt = '<n>(%.3f ms @ '+sv.timeformat+')</n>'
flen = fmt % (line.length*1000, line.time)
if line.isLeaf():
+ if line.length * 1000 < sv.mincglen:
+ continue
hf.write(html_func_leaf.format(line.name, flen))
elif line.freturn:
hf.write(html_func_end)
if('cpuexec' in dev):
for t in sorted(dev['cpuexec']):
start, end = t
- j = float(dev['cpuexec'][t]) / 5
- if j > 1.0:
- j = 1.0
height = '%.3f' % (rowheight/3)
top = '%.3f' % (rowtop + devtl.scaleH + 2*rowheight/3)
left = '%f' % (((start-m0)*100)/mTotal)
width = '%f' % ((end-start)*100/mTotal)
- color = 'rgba(255, 0, 0, %f)' % j
+ color = 'rgba(255, 0, 0, %f)' % dev['cpuexec'][t]
devtl.html += \
html_cpuexec.format(left, top, height, width, color)
if('src' not in dev):
call('sync', shell=True)
sv.dlog('read dmesg')
sv.initdmesg()
- # start ftrace
- if sv.useftrace:
- if not quiet:
- pprint('START TRACING')
- sv.dlog('start ftrace tracing')
- sv.fsetVal('1', 'tracing_on')
- if sv.useprocmon:
- sv.dlog('start the process monitor')
- pm.start()
- sv.dlog('run the cmdinfo list before')
+ sv.dlog('cmdinfo before')
sv.cmdinfo(True)
+ sv.start(pm)
# execute however many s/r runs requested
for count in range(1,sv.execcount+1):
# x2delay in between test runs
if res != 0:
tdata['error'] = 'cmd returned %d' % res
else:
+ s0ixready = sv.s0ixSupport()
mode = sv.suspendmode
if sv.memmode and os.path.exists(sv.mempowerfile):
mode = 'mem'
sv.testVal(sv.diskpowerfile, 'radio', sv.diskmode)
if sv.acpidebug:
sv.testVal(sv.acpipath, 'acpi', '0xe')
- if mode == 'freeze' and sv.haveTurbostat():
+ if ((mode == 'freeze') or (sv.memmode == 's2idle')) \
+ and sv.haveTurbostat():
# execution will pause here
- turbo = sv.turbostat()
+ turbo = sv.turbostat(s0ixready)
if turbo:
tdata['turbo'] = turbo
else:
pf.close()
except Exception as e:
tdata['error'] = str(e)
- sv.dlog('system returned from resume')
+ sv.fsetVal('CMD COMPLETE', 'trace_marker')
+ sv.dlog('system returned')
# reset everything
sv.testVal('restoreall')
if(sv.rtcwake):
sv.fsetVal('WAIT END', 'trace_marker')
# return from suspend
pprint('RESUME COMPLETE')
- sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker')
+ if(count < sv.execcount):
+ sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker')
+ elif(not sv.wifitrace):
+ sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker')
+ sv.stop(pm)
if sv.wifi and wifi:
tdata['wifi'] = sv.pollWifi(wifi)
sv.dlog('wifi check, %s' % tdata['wifi'])
- if sv.netfix:
- netfixout = sv.netfixon('wired')
- elif sv.netfix:
- netfixout = sv.netfixon()
- if sv.netfix and netfixout:
- tdata['netfix'] = netfixout
+ if(count == sv.execcount and sv.wifitrace):
+ sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker')
+ sv.stop(pm)
+ if sv.netfix:
+ tdata['netfix'] = sv.netfixon()
sv.dlog('netfix, %s' % tdata['netfix'])
if(sv.suspendmode == 'mem' or sv.suspendmode == 'command'):
sv.dlog('read the ACPI FPDT')
tdata['fw'] = getFPDT(False)
testdata.append(tdata)
- sv.dlog('run the cmdinfo list after')
+ sv.dlog('cmdinfo after')
cmdafter = sv.cmdinfo(False)
- # stop ftrace
- if sv.useftrace:
- if sv.useprocmon:
- sv.dlog('stop the process monitor')
- pm.stop()
- sv.fsetVal('0', 'tracing_on')
# grab a copy of the dmesg output
if not quiet:
pprint('CAPTURING DMESG')
- sysvals.dlog('EXECUTION TRACE END')
sv.getdmesg(testdata)
# grab a copy of the ftrace output
if sv.useftrace:
if not m:
continue
name, time, phase = m.group('n'), m.group('t'), m.group('p')
+ if name == 'async_synchronize_full':
+ continue
if ' async' in name or ' sync' in name:
name = ' '.join(name.split(' ')[:-1])
if phase.startswith('suspend'):
' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
' -result fn Export a results table to a text file for parsing.\n'\
' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\
+ ' -wifitrace Trace kernel execution through wifi reconnect.\n'\
' -netfix Use netfix to reset the network in the event it fails to resume.\n'\
' [testprep]\n'\
' -sync Sync the filesystems before starting the test\n'\
sysvals.sync = True
elif(arg == '-wifi'):
sysvals.wifi = True
+ elif(arg == '-wifitrace'):
+ sysvals.wifitrace = True
elif(arg == '-netfix'):
sysvals.netfix = True
elif(arg == '-gzip'):
projects / platform / kernel / linux-rpi.git / commitdiff