ARM: dts: meson8b: odroid-c1: sort nodes alphabetically

This makes it easier to find existing nodes. No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 3a5603d..7d8ad46 100644 (file)
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -103,10 +103,34 @@
        };
 };
 
-&uart_AO {
+&ethmac {
        status = "okay";
-       pinctrl-0 = <&uart_ao_a_pins>;
+
+       snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 30000>;
+
+       pinctrl-0 = <&eth_rgmii_pins>;
        pinctrl-names = "default";
+
+       phy-mode = "rgmii";
+       phy-handle = <&eth_phy>;
+       amlogic,tx-delay-ns = <4>;
+
+       mdio {
+               compatible = "snps,dwmac-mdio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               /* Realtek RTL8211F (0x001cc916) */
+               eth_phy: ethernet-phy@0 {
+                       reg = <0>;
+                       eee-broken-1000t;
+                       interrupt-parent = <&gpio_intc>;
+                       /* GPIOH_3 */
+                       interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+               };
+       };
 };
 
 &gpio_ao {
@@ -124,14 +148,6 @@
        };
 };
 
-&usb1_phy {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};
-
 &sdio {
        status = "okay";
 
@@ -158,32 +174,16 @@
        };
 };
 
-&ethmac {
+&uart_AO {
        status = "okay";
-
-       snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
-       snps,reset-active-low;
-       snps,reset-delays-us = <0 10000 30000>;
-
-       pinctrl-0 = <&eth_rgmii_pins>;
+       pinctrl-0 = <&uart_ao_a_pins>;
        pinctrl-names = "default";
+};
 
-       phy-mode = "rgmii";
-       phy-handle = <&eth_phy>;
-       amlogic,tx-delay-ns = <4>;
-
-       mdio {
-               compatible = "snps,dwmac-mdio";
-               #address-cells = <1>;
-               #size-cells = <0>;
+&usb1_phy {
+       status = "okay";
+};
 
-               /* Realtek RTL8211F (0x001cc916) */
-               eth_phy: ethernet-phy@0 {
-                       reg = <0>;
-                       eee-broken-1000t;
-                       interrupt-parent = <&gpio_intc>;
-                       /* GPIOH_3 */
-                       interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-               };
-       };
+&usb1 {
+       status = "okay";
 };