regulator: qcom_spmi: Add missing braces for aligned code
authorStephen Boyd <sboyd@codeaurora.org>
Tue, 16 Jun 2015 18:11:22 +0000 (11:11 -0700)
committerMark Brown <broonie@kernel.org>
Wed, 17 Jun 2015 07:54:19 +0000 (08:54 +0100)
drivers/regulator/qcom_spmi-regulator.c:751:3-50: code aligned
with following code on line 753
drivers/regulator/qcom_spmi-regulator.c:584:3-41: code aligned
with following code on line 587

These lines where missing braces causing the break to always
be executed even when it shouldn't be. Fix it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/qcom_spmi-regulator.c

index 15bba2b..16a5c18 100644 (file)
@@ -580,11 +580,12 @@ static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
        *selector = 0;
        for (i = 0; i < vreg->set_points->count; i++) {
                if (uV >= vreg->set_points->range[i].set_point_min_uV
-                   && uV <= vreg->set_points->range[i].set_point_max_uV)
+                   && uV <= vreg->set_points->range[i].set_point_max_uV) {
                        *selector +=
                            (uV - vreg->set_points->range[i].set_point_min_uV)
                                / vreg->set_points->range[i].step_uV;
                        break;
+               }
 
                *selector += vreg->set_points->range[i].n_voltages;
        }
@@ -743,10 +744,11 @@ static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
                return 0;
 
        for (i = 0; i < vreg->set_points->count; i++) {
-               if (selector < vreg->set_points->range[i].n_voltages)
+               if (selector < vreg->set_points->range[i].n_voltages) {
                        uV = selector * vreg->set_points->range[i].step_uV
                                + vreg->set_points->range[i].set_point_min_uV;
                        break;
+               }
 
                selector -= vreg->set_points->range[i].n_voltages;
        }