First, number of CPUs can't be negative number.
Second, different signnnedness leads to suboptimal code in the following
cases:
1)
kmalloc(nr_cpu_ids * sizeof(X));
"int" has to be sign extended to size_t.
2)
while (loff_t *pos < nr_cpu_ids)
MOVSXD is 1 byte longed than the same MOV.
Other cases exist as well. Basically compiler is told that nr_cpu_ids
can't be negative which can't be deduced if it is "int".
Code savings on allyesconfig kernel: -3KB
add/remove: 0/0 grow/shrink: 25/264 up/down: 261/-3631 (-3370)
function old new delta
coretemp_cpu_online 450 512 +62
rcu_init_one 1234 1272 +38
pci_device_probe 374 399 +25
...
pgdat_reclaimable_pages 628 556 -72
select_fallback_rq 446 369 -77
task_numa_find_cpu 1923 1807 -116
Link: http://lkml.kernel.org/r/20170819114959.GA30580@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
acpi_parse_gic_cpu_interface, 0);
if (cpu_count > nr_cpu_ids)
- pr_warn("Number of cores (%d) exceeds configured maximum of %d - clipping\n",
+ pr_warn("Number of cores (%d) exceeds configured maximum of %u - clipping\n",
cpu_count, nr_cpu_ids);
if (!bootcpu_valid) {
paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
memset(paca, 0, paca_size);
- printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
+ printk(KERN_DEBUG "Allocated %u bytes for %u pacas at %p\n",
paca_size, nr_cpu_ids, paca);
allocate_lppacas(nr_cpu_ids, limit);
if (maxcpus > nr_cpu_ids) {
printk(KERN_WARNING
"Partition configured for %d cpus, "
- "operating system maximum is %d.\n",
+ "operating system maximum is %u.\n",
maxcpus, nr_cpu_ids);
maxcpus = nr_cpu_ids;
} else
static void xive_native_setup_pools(void)
{
/* Allocate a pool big enough */
- pr_debug("XIVE: Allocating VP block for pool size %d\n", nr_cpu_ids);
+ pr_debug("XIVE: Allocating VP block for pool size %u\n", nr_cpu_ids);
xive_pool_vps = xive_native_alloc_vp_block(nr_cpu_ids);
if (WARN_ON(xive_pool_vps == XIVE_INVALID_VP))
pr_err("XIVE: Failed to allocate pool VP, KVM might not function\n");
- pr_debug("XIVE: Pool VPs allocated at 0x%x for %d max CPUs\n",
+ pr_debug("XIVE: Pool VPs allocated at 0x%x for %u max CPUs\n",
xive_pool_vps, nr_cpu_ids);
}
* We use a struct cpumask for this, so it must be big enough.
*/
if ((smp_height * smp_width) > nr_cpu_ids)
- early_panic("Hypervisor %d x %d grid too big for Linux NR_CPUS %d\n",
+ early_panic("Hypervisor %d x %d grid too big for Linux NR_CPUS %u\n",
smp_height, smp_width, nr_cpu_ids);
#endif
/* Allocate a new cpuid. */
if (nr_logical_cpuids >= nr_cpu_ids) {
- WARN_ONCE(1, "APIC: NR_CPUS/possible_cpus limit of %i reached. "
+ WARN_ONCE(1, "APIC: NR_CPUS/possible_cpus limit of %u reached. "
"Processor %d/0x%x and the rest are ignored.\n",
nr_cpu_ids, nr_logical_cpuids, apicid);
return -EINVAL;
unsigned long delta;
int rc;
- pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
+ pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%u nr_node_ids:%d\n",
NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
/*
/* nr_cpu_ids could be reduced via nr_cpus= */
if (possible > nr_cpu_ids) {
- pr_warn("%d Processors exceeds NR_CPUS limit of %d\n",
+ pr_warn("%d Processors exceeds NR_CPUS limit of %u\n",
possible, nr_cpu_ids);
possible = nr_cpu_ids;
}
buf[n++] = ',';
if (nr_cpu_ids == total_cpus-1)
- n += snprintf(&buf[n], len - n, "%d", nr_cpu_ids);
+ n += snprintf(&buf[n], len - n, "%u", nr_cpu_ids);
else
- n += snprintf(&buf[n], len - n, "%d-%d",
+ n += snprintf(&buf[n], len - n, "%u-%d",
nr_cpu_ids, total_cpus-1);
}
return error;
}
if (submit_queues > nr_cpu_ids) {
- pr_warn("%s: trim submit_queues (was %d) to nr_cpu_ids=%d\n",
+ pr_warn("%s: trim submit_queues (was %d) to nr_cpu_ids=%u\n",
my_name, submit_queues, nr_cpu_ids);
submit_queues = nr_cpu_ids;
}
#define cpumask_pr_args(maskp) nr_cpu_ids, cpumask_bits(maskp)
#if NR_CPUS == 1
-#define nr_cpu_ids 1
+#define nr_cpu_ids 1U
#else
-extern int nr_cpu_ids;
+extern unsigned int nr_cpu_ids;
#endif
#ifdef CONFIG_CPUMASK_OFFSTACK
/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
* not all bits may be allocated. */
-#define nr_cpumask_bits ((unsigned int)nr_cpu_ids)
+#define nr_cpumask_bits nr_cpu_ids
#else
#define nr_cpumask_bits ((unsigned int)NR_CPUS)
#endif
if (rcu_fanout_leaf == RCU_FANOUT_LEAF &&
nr_cpu_ids == NR_CPUS)
return;
- pr_info("RCU: Adjusting geometry for rcu_fanout_leaf=%d, nr_cpu_ids=%d\n",
+ pr_info("RCU: Adjusting geometry for rcu_fanout_leaf=%d, nr_cpu_ids=%u\n",
rcu_fanout_leaf, nr_cpu_ids);
/*
if (rcu_fanout_leaf != RCU_FANOUT_LEAF)
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
- pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
+ pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%u.\n", NR_CPUS, nr_cpu_ids);
#ifdef CONFIG_RCU_BOOST
pr_info("\tRCU priority boosting: priority %d delay %d ms.\n", kthread_prio, CONFIG_RCU_BOOST_DELAY);
#endif
alloc_bootmem_cpumask_var(&cpu_isolated_map);
ret = cpulist_parse(str, cpu_isolated_map);
if (ret) {
- pr_err("sched: Error, all isolcpus= values must be between 0 and %d\n", nr_cpu_ids);
+ pr_err("sched: Error, all isolcpus= values must be between 0 and %u\n", nr_cpu_ids);
return 0;
}
return 1;
early_param("maxcpus", maxcpus);
/* Setup number of possible processor ids */
-int nr_cpu_ids __read_mostly = NR_CPUS;
+unsigned int nr_cpu_ids __read_mostly = NR_CPUS;
EXPORT_SYMBOL(nr_cpu_ids);
/* An arch may set nr_cpu_ids earlier if needed, so this would be redundant */
static __init int init_graph_trace(void)
{
- max_bytes_for_cpu = snprintf(NULL, 0, "%d", nr_cpu_ids - 1);
+ max_bytes_for_cpu = snprintf(NULL, 0, "%u", nr_cpu_ids - 1);
if (!register_trace_event(&graph_trace_entry_event)) {
pr_warn("Warning: could not register graph trace events\n");
cpuhp_setup_state_nocalls(CPUHP_SLUB_DEAD, "slub:dead", NULL,
slub_cpu_dead);
- pr_info("SLUB: HWalign=%d, Order=%d-%d, MinObjects=%d, CPUs=%d, Nodes=%d\n",
+ pr_info("SLUB: HWalign=%d, Order=%d-%d, MinObjects=%d, CPUs=%u, Nodes=%d\n",
cache_line_size(),
slub_min_order, slub_max_order, slub_min_objects,
nr_cpu_ids, nr_node_ids);