* (c) 2001 Red Hat Inc
* Lockless wakeup
* (c) 2003 Manfred Spraul <manfred@colorfullife.com>
+ * (c) 2016 Davidlohr Bueso <dave@stgolabs.net>
* Further wakeup optimizations, documentation
* (c) 2010 Manfred Spraul <manfred@colorfullife.com>
*
* Semaphores are actively given to waiting tasks (necessary for FIFO).
* (see update_queue())
* - To improve the scalability, the actual wake-up calls are performed after
- * dropping all locks. (see wake_up_sem_queue_prepare(),
- * wake_up_sem_queue_do())
+ * dropping all locks. (see wake_up_sem_queue_prepare())
* - All work is done by the waker, the woken up task does not have to do
* anything - not even acquiring a lock or dropping a refcount.
* - A woken up task may not even touch the semaphore array anymore, it may
* have been destroyed already by a semctl(RMID).
- * - The synchronizations between wake-ups due to a timeout/signal and a
- * wake-up due to a completed semaphore operation is achieved by using an
- * intermediate state (IN_WAKEUP).
* - UNDO values are stored in an array (one per process and per
* semaphore array, lazily allocated). For backwards compatibility, multiple
* modes for the UNDO variables are supported (per process, per thread)
ipc_rmid(&sem_ids(ns), &s->sem_perm);
}
-/*
- * Lockless wakeup algorithm:
- * Without the check/retry algorithm a lockless wakeup is possible:
- * - queue.status is initialized to -EINTR before blocking.
- * - wakeup is performed by
- * * unlinking the queue entry from the pending list
- * * setting queue.status to IN_WAKEUP
- * This is the notification for the blocked thread that a
- * result value is imminent.
- * * call wake_up_process
- * * set queue.status to the final value.
- * - the previously blocked thread checks queue.status:
- * * if it's IN_WAKEUP, then it must wait until the value changes
- * * if it's not -EINTR, then the operation was completed by
- * update_queue. semtimedop can return queue.status without
- * performing any operation on the sem array.
- * * otherwise it must acquire the spinlock and check what's up.
- *
- * The two-stage algorithm is necessary to protect against the following
- * races:
- * - if queue.status is set after wake_up_process, then the woken up idle
- * thread could race forward and try (and fail) to acquire sma->lock
- * before update_queue had a chance to set queue.status
- * - if queue.status is written before wake_up_process and if the
- * blocked process is woken up by a signal between writing
- * queue.status and the wake_up_process, then the woken up
- * process could return from semtimedop and die by calling
- * sys_exit before wake_up_process is called. Then wake_up_process
- * will oops, because the task structure is already invalid.
- * (yes, this happened on s390 with sysv msg).
- *
- */
-#define IN_WAKEUP 1
-
/**
* newary - Create a new semaphore set
* @ns: namespace
return result;
}
-/** wake_up_sem_queue_prepare(q, error): Prepare wake-up
- * @q: queue entry that must be signaled
- * @error: Error value for the signal
- *
- * Prepare the wake-up of the queue entry q.
- */
-static void wake_up_sem_queue_prepare(struct list_head *pt,
- struct sem_queue *q, int error)
-{
- if (list_empty(pt)) {
- /*
- * Hold preempt off so that we don't get preempted and have the
- * wakee busy-wait until we're scheduled back on.
- */
- preempt_disable();
- }
- q->status = IN_WAKEUP;
- q->pid = error;
-
- list_add_tail(&q->list, pt);
-}
-
-/**
- * wake_up_sem_queue_do - do the actual wake-up
- * @pt: list of tasks to be woken up
- *
- * Do the actual wake-up.
- * The function is called without any locks held, thus the semaphore array
- * could be destroyed already and the tasks can disappear as soon as the
- * status is set to the actual return code.
- */
-static void wake_up_sem_queue_do(struct list_head *pt)
+static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
+ struct wake_q_head *wake_q)
{
- struct sem_queue *q, *t;
- int did_something;
-
- did_something = !list_empty(pt);
- list_for_each_entry_safe(q, t, pt, list) {
- wake_up_process(q->sleeper);
- /* q can disappear immediately after writing q->status. */
- smp_wmb();
- q->status = q->pid;
- }
- if (did_something)
- preempt_enable();
+ wake_q_add(wake_q, q->sleeper);
+ /*
+ * Rely on the above implicit barrier, such that we can
+ * ensure that we hold reference to the task before setting
+ * q->status. Otherwise we could race with do_exit if the
+ * task is awoken by an external event before calling
+ * wake_up_process().
+ */
+ WRITE_ONCE(q->status, error);
}
static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
* wake_const_ops - wake up non-alter tasks
* @sma: semaphore array.
* @semnum: semaphore that was modified.
- * @pt: list head for the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head.
*
* wake_const_ops must be called after a semaphore in a semaphore array
* was set to 0. If complex const operations are pending, wake_const_ops must
* be called with semnum = -1, as well as with the number of each modified
* semaphore.
- * The tasks that must be woken up are added to @pt. The return code
+ * The tasks that must be woken up are added to @wake_q. The return code
* is stored in q->pid.
* The function returns 1 if at least one operation was completed successfully.
*/
static int wake_const_ops(struct sem_array *sma, int semnum,
- struct list_head *pt)
+ struct wake_q_head *wake_q)
{
struct sem_queue *q;
struct list_head *walk;
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(pt, q, error);
+ wake_up_sem_queue_prepare(q, error, wake_q);
if (error == 0)
semop_completed = 1;
}
* @sma: semaphore array
* @sops: operations that were performed
* @nsops: number of operations
- * @pt: list head of the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head
*
* Checks all required queue for wait-for-zero operations, based
* on the actual changes that were performed on the semaphore array.
* The function returns 1 if at least one operation was completed successfully.
*/
static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
- int nsops, struct list_head *pt)
+ int nsops, struct wake_q_head *wake_q)
{
int i;
int semop_completed = 0;
if (sma->sem_base[num].semval == 0) {
got_zero = 1;
- semop_completed |= wake_const_ops(sma, num, pt);
+ semop_completed |= wake_const_ops(sma, num, wake_q);
}
}
} else {
for (i = 0; i < sma->sem_nsems; i++) {
if (sma->sem_base[i].semval == 0) {
got_zero = 1;
- semop_completed |= wake_const_ops(sma, i, pt);
+ semop_completed |= wake_const_ops(sma, i, wake_q);
}
}
}
* then check the global queue, too.
*/
if (got_zero)
- semop_completed |= wake_const_ops(sma, -1, pt);
+ semop_completed |= wake_const_ops(sma, -1, wake_q);
return semop_completed;
}
* update_queue - look for tasks that can be completed.
* @sma: semaphore array.
* @semnum: semaphore that was modified.
- * @pt: list head for the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head.
*
* update_queue must be called after a semaphore in a semaphore array
* was modified. If multiple semaphores were modified, update_queue must
* be called with semnum = -1, as well as with the number of each modified
* semaphore.
- * The tasks that must be woken up are added to @pt. The return code
+ * The tasks that must be woken up are added to @wake_q. The return code
* is stored in q->pid.
* The function internally checks if const operations can now succeed.
*
* The function return 1 if at least one semop was completed successfully.
*/
-static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
+static int update_queue(struct sem_array *sma, int semnum, struct wake_q_head *wake_q)
{
struct sem_queue *q;
struct list_head *walk;
restart = 0;
} else {
semop_completed = 1;
- do_smart_wakeup_zero(sma, q->sops, q->nsops, pt);
+ do_smart_wakeup_zero(sma, q->sops, q->nsops, wake_q);
restart = check_restart(sma, q);
}
- wake_up_sem_queue_prepare(pt, q, error);
+ wake_up_sem_queue_prepare(q, error, wake_q);
if (restart)
goto again;
}
* @sops: operations that were performed
* @nsops: number of operations
* @otime: force setting otime
- * @pt: list head of the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head
*
* do_smart_update() does the required calls to update_queue and wakeup_zero,
* based on the actual changes that were performed on the semaphore array.
* Note that the function does not do the actual wake-up: the caller is
- * responsible for calling wake_up_sem_queue_do(@pt).
+ * responsible for calling wake_up_q().
* It is safe to perform this call after dropping all locks.
*/
static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
- int otime, struct list_head *pt)
+ int otime, struct wake_q_head *wake_q)
{
int i;
- otime |= do_smart_wakeup_zero(sma, sops, nsops, pt);
+ otime |= do_smart_wakeup_zero(sma, sops, nsops, wake_q);
if (!list_empty(&sma->pending_alter)) {
/* semaphore array uses the global queue - just process it. */
- otime |= update_queue(sma, -1, pt);
+ otime |= update_queue(sma, -1, wake_q);
} else {
if (!sops) {
/*
* known. Check all.
*/
for (i = 0; i < sma->sem_nsems; i++)
- otime |= update_queue(sma, i, pt);
+ otime |= update_queue(sma, i, wake_q);
} else {
/*
* Check the semaphores that were increased:
for (i = 0; i < nsops; i++) {
if (sops[i].sem_op > 0) {
otime |= update_queue(sma,
- sops[i].sem_num, pt);
+ sops[i].sem_num, wake_q);
}
}
}
struct sem_undo *un, *tu;
struct sem_queue *q, *tq;
struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
- struct list_head tasks;
int i;
+ DEFINE_WAKE_Q(wake_q);
/* Free the existing undo structures for this semaphore set. */
ipc_assert_locked_object(&sma->sem_perm);
}
/* Wake up all pending processes and let them fail with EIDRM. */
- INIT_LIST_HEAD(&tasks);
list_for_each_entry_safe(q, tq, &sma->pending_const, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
for (i = 0; i < sma->sem_nsems; i++) {
struct sem *sem = sma->sem_base + i;
list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
list_for_each_entry_safe(q, tq, &sem->pending_alter, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
}
sem_unlock(sma, -1);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
ns->used_sems -= sma->sem_nsems;
ipc_rcu_putref(sma, sem_rcu_free);
}
struct sem_undo *un;
struct sem_array *sma;
struct sem *curr;
- int err;
- struct list_head tasks;
- int val;
+ int err, val;
+ DEFINE_WAKE_Q(wake_q);
+
#if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
/* big-endian 64bit */
val = arg >> 32;
if (val > SEMVMX || val < 0)
return -ERANGE;
- INIT_LIST_HEAD(&tasks);
-
rcu_read_lock();
sma = sem_obtain_object_check(ns, semid);
if (IS_ERR(sma)) {
curr->sempid = task_tgid_vnr(current);
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- do_smart_update(sma, NULL, 0, 0, &tasks);
+ do_smart_update(sma, NULL, 0, 0, &wake_q);
sem_unlock(sma, -1);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
return 0;
}
int err, nsems;
ushort fast_sem_io[SEMMSL_FAST];
ushort *sem_io = fast_sem_io;
- struct list_head tasks;
-
- INIT_LIST_HEAD(&tasks);
+ DEFINE_WAKE_Q(wake_q);
rcu_read_lock();
sma = sem_obtain_object_check(ns, semid);
}
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- do_smart_update(sma, NULL, 0, 0, &tasks);
+ do_smart_update(sma, NULL, 0, 0, &wake_q);
err = 0;
goto out_unlock;
}
sem_unlock(sma, -1);
out_rcu_wakeup:
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
out_free:
if (sem_io != fast_sem_io)
ipc_free(sem_io);
return un;
}
-
-/**
- * get_queue_result - retrieve the result code from sem_queue
- * @q: Pointer to queue structure
- *
- * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
- * q->status, then we must loop until the value is replaced with the final
- * value: This may happen if a task is woken up by an unrelated event (e.g.
- * signal) and in parallel the task is woken up by another task because it got
- * the requested semaphores.
- *
- * The function can be called with or without holding the semaphore spinlock.
- */
-static int get_queue_result(struct sem_queue *q)
-{
- int error;
-
- error = q->status;
- while (unlikely(error == IN_WAKEUP)) {
- cpu_relax();
- error = q->status;
- }
-
- return error;
-}
-
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
struct sem_queue queue;
unsigned long jiffies_left = 0;
struct ipc_namespace *ns;
- struct list_head tasks;
ns = current->nsproxy->ipc_ns;
alter = 1;
}
- INIT_LIST_HEAD(&tasks);
if (undos) {
/* On success, find_alloc_undo takes the rcu_read_lock */
queue.alter = alter;
error = perform_atomic_semop(sma, &queue);
- if (error == 0) {
- /* If the operation was successful, then do
+ if (error == 0) { /* non-blocking succesfull path */
+ DEFINE_WAKE_Q(wake_q);
+
+ /*
+ * If the operation was successful, then do
* the required updates.
*/
if (alter)
- do_smart_update(sma, sops, nsops, 1, &tasks);
+ do_smart_update(sma, sops, nsops, 1, &wake_q);
else
set_semotime(sma, sops);
+
+ sem_unlock(sma, locknum);
+ rcu_read_unlock();
+ wake_up_q(&wake_q);
+
+ goto out_free;
}
- if (error <= 0)
+ if (error < 0) /* non-blocking error path */
goto out_unlock_free;
- /* We need to sleep on this operation, so we put the current
+ /*
+ * We need to sleep on this operation, so we put the current
* task into the pending queue and go to sleep.
*/
-
if (nsops == 1) {
struct sem *curr;
curr = &sma->sem_base[sops->sem_num];
sma->complex_count++;
}
+sleep_again:
queue.status = -EINTR;
queue.sleeper = current;
-sleep_again:
__set_current_state(TASK_INTERRUPTIBLE);
sem_unlock(sma, locknum);
rcu_read_unlock();
else
schedule();
- error = get_queue_result(&queue);
-
+ /*
+ * fastpath: the semop has completed, either successfully or not, from
+ * the syscall pov, is quite irrelevant to us at this point; we're done.
+ *
+ * We _do_ care, nonetheless, about being awoken by a signal or
+ * spuriously. The queue.status is checked again in the slowpath (aka
+ * after taking sem_lock), such that we can detect scenarios where we
+ * were awakened externally, during the window between wake_q_add() and
+ * wake_up_q().
+ */
+ error = READ_ONCE(queue.status);
if (error != -EINTR) {
- /* fast path: update_queue already obtained all requested
- * resources.
- * Perform a smp_mb(): User space could assume that semop()
- * is a memory barrier: Without the mb(), the cpu could
- * speculatively read in user space stale data that was
- * overwritten by the previous owner of the semaphore.
+ /*
+ * User space could assume that semop() is a memory barrier:
+ * Without the mb(), the cpu could speculatively read in user
+ * space stale data that was overwritten by the previous owner
+ * of the semaphore.
*/
smp_mb();
-
goto out_free;
}
rcu_read_lock();
sma = sem_obtain_lock(ns, semid, sops, nsops, &locknum);
-
- /*
- * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
- */
- error = get_queue_result(&queue);
+ error = READ_ONCE(queue.status);
/*
* Array removed? If yes, leave without sem_unlock().
goto out_free;
}
-
/*
* If queue.status != -EINTR we are woken up by another process.
* Leave without unlink_queue(), but with sem_unlock().
goto out_unlock_free;
/*
- * If an interrupt occurred we have to clean up the queue
+ * If an interrupt occurred we have to clean up the queue.
*/
if (timeout && jiffies_left == 0)
error = -EAGAIN;
/*
- * If the wakeup was spurious, just retry
+ * If the wakeup was spurious, just retry.
*/
if (error == -EINTR && !signal_pending(current))
goto sleep_again;
out_unlock_free:
sem_unlock(sma, locknum);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
out_free:
if (sops != fast_sops)
kfree(sops);
for (;;) {
struct sem_array *sma;
struct sem_undo *un;
- struct list_head tasks;
int semid, i;
+ DEFINE_WAKE_Q(wake_q);
cond_resched();
}
}
/* maybe some queued-up processes were waiting for this */
- INIT_LIST_HEAD(&tasks);
- do_smart_update(sma, NULL, 0, 1, &tasks);
+ do_smart_update(sma, NULL, 0, 1, &wake_q);
sem_unlock(sma, -1);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
kfree_rcu(un, rcu);
}
projects / platform / kernel / linux-starfive.git / commitdiff