#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 92
+#define H4_CS0_BASE 0x04000000
+
+#define H4_CS0_BASE 0x04000000
+
#endif /* __ASM_ARCH_OMAP_H4_H */
#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
#define __ASM_ARCH_OMAP_INNOVATOR_H
-#if defined (CONFIG_ARCH_OMAP1510)
+#if defined (CONFIG_ARCH_OMAP15XX)
#ifndef OMAP_SDRAM_DEVICE
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
unsigned char fpga_read(int reg);
#endif
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
#if defined (CONFIG_ARCH_OMAP16XX)
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-omap/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ struct clk *parent;
+ unsigned long rate;
+ __u32 flags;
+ void __iomem *enable_reg;
+ __u8 enable_bit;
+ __u8 rate_offset;
+ __u8 src_offset;
+ __s8 usecount;
+ void (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ int (*clk_use)(struct clk *clk);
+ void (*clk_unuse)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ struct clk * (*clk_get_parent)(struct clk *clk);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+};
+
+extern unsigned int mpurate;
+extern struct list_head clocks;
+extern spinlock_t clockfw_lock;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+
+/* Clock flags */
+#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
+#define RATE_FIXED (1 << 1) /* Fixed clock rate */
+#define RATE_PROPAGATES (1 << 2) /* Program children too */
+#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */
+#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */
+#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL (1 << 7)
+#define CLOCK_NO_IDLE_PARENT (1 << 8)
+#define DELAYED_APP (1 << 9) /* Delay application of clock */
+#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
+#define CM_MPU_SEL1 (1 << 11) /* Domain divider/source */
+#define CM_DSP_SEL1 (1 << 12)
+#define CM_GFX_SEL1 (1 << 13)
+#define CM_MODEM_SEL1 (1 << 14)
+#define CM_CORE_SEL1 (1 << 15) /* Sets divider for many */
+#define CM_CORE_SEL2 (1 << 16) /* sets parent for GPT */
+#define CM_WKUP_SEL1 (1 << 17)
+#define CM_PLL_SEL1 (1 << 18)
+#define CM_PLL_SEL2 (1 << 19)
+#define CM_SYSCLKOUT_SEL1 (1 << 20)
+#define CLOCK_IN_OMAP730 (1 << 21)
+#define CLOCK_IN_OMAP1510 (1 << 22)
+#define CLOCK_IN_OMAP16XX (1 << 23)
+#define CLOCK_IN_OMAP242X (1 << 24)
+#define CLOCK_IN_OMAP243X (1 << 25)
+
+#endif
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-extern void omap_serial_init(int ports[]);
+extern void omap_serial_init(void);
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
extern unsigned int system_rev;
-#define OMAP_DIE_ID_0 0xfffe1800
-#define OMAP_DIE_ID_1 0xfffe1804
-#define OMAP_PRODUCTION_ID_0 0xfffe2000
-#define OMAP_PRODUCTION_ID_1 0xfffe2004
-#define OMAP32_ID_0 0xfffed400
-#define OMAP32_ID_1 0xfffed404
+#define omap2_cpu_rev() ((system_rev >> 8) & 0x0f)
/*
* Test if multicore OMAP support is needed
# define OMAP_NAME omap730
# endif
#endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730
- * cpu_is_omap15xx(): True for OMAP1510 and OMAP5910
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx(): True for OMAP2420
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
*/
#define GET_OMAP_CLASS (system_rev & 0xff)
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
+#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# endif
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
# endif
# endif
# if defined(CONFIG_ARCH_OMAP24XX)
# undef cpu_is_omap24xx
+# undef cpu_is_omap242x
+# undef cpu_is_omap243x
# define cpu_is_omap24xx() 1
+# define cpu_is_omap242x() is_omap242x()
+# define cpu_is_omap243x() is_omap243x()
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
+ * cpu_is_omap330(): True for OMAP330
* cpu_is_omap730(): True for OMAP730
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1621(): True for OMAP1621
* cpu_is_omap1710(): True for OMAP1710
* cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
*/
#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff)
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
+IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(730, 0x0730)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1621, 0x1621)
IS_OMAP_TYPE(1710, 0x1710)
IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() is_omap730()
# endif
-# if defined(CONFIG_ARCH_OMAP1510)
-# undef cpu_is_omap1510
-# define cpu_is_omap1510() is_omap1510()
-# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() 1
# endif
-# if defined(CONFIG_ARCH_OMAP1510)
-# undef cpu_is_omap1510
-# define cpu_is_omap1510() 1
-# endif
#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 1611B/5912 and 1710.
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
*/
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
#if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap1610
# undef cpu_is_omap1611
# define cpu_is_omap1710() is_omap1710()
#endif
-#if defined(CONFIG_ARCH_OMAP2420)
-# undef cpu_is_omap2420
-# define cpu_is_omap2420() 1
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
#endif
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \
+ cpu_is_omap16xx())
+#define cpu_class_is_omap2() cpu_is_omap24xx()
+
#endif
#define __ASM_ARCH_DMA_H
#define MAX_DMA_ADDRESS 0xffffffff
+#define MAX_DMA_CHANNELS 0
+
+/* Hardware registers for omap1 */
+#define OMAP_DMA_BASE (0xfffed800)
+#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400)
+#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404)
+#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408)
+#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442)
+#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444)
+#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446)
+#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448)
+#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a)
+#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c)
+#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e)
+#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450)
+#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452)
+#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454)
+#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456)
+#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458)
+#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a)
+#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460)
+#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480)
+#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482)
+#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0)
+
+/* Hardware registers for omap2 */
+#define OMAP24XX_DMA_BASE (L4_24XX_BASE + 0x56000)
+#define OMAP_DMA4_REVISION (OMAP24XX_DMA_BASE + 0x00)
+#define OMAP_DMA4_GCR_REG (OMAP24XX_DMA_BASE + 0x78)
+#define OMAP_DMA4_IRQSTATUS_L0 (OMAP24XX_DMA_BASE + 0x08)
+#define OMAP_DMA4_IRQSTATUS_L1 (OMAP24XX_DMA_BASE + 0x0c)
+#define OMAP_DMA4_IRQSTATUS_L2 (OMAP24XX_DMA_BASE + 0x10)
+#define OMAP_DMA4_IRQSTATUS_L3 (OMAP24XX_DMA_BASE + 0x14)
+#define OMAP_DMA4_IRQENABLE_L0 (OMAP24XX_DMA_BASE + 0x18)
+#define OMAP_DMA4_IRQENABLE_L1 (OMAP24XX_DMA_BASE + 0x1c)
+#define OMAP_DMA4_IRQENABLE_L2 (OMAP24XX_DMA_BASE + 0x20)
+#define OMAP_DMA4_IRQENABLE_L3 (OMAP24XX_DMA_BASE + 0x24)
+#define OMAP_DMA4_SYSSTATUS (OMAP24XX_DMA_BASE + 0x28)
+#define OMAP_DMA4_CAPS_0 (OMAP24XX_DMA_BASE + 0x64)
+#define OMAP_DMA4_CAPS_2 (OMAP24XX_DMA_BASE + 0x6c)
+#define OMAP_DMA4_CAPS_3 (OMAP24XX_DMA_BASE + 0x70)
+#define OMAP_DMA4_CAPS_4 (OMAP24XX_DMA_BASE + 0x74)
+
+#ifdef CONFIG_ARCH_OMAP1
#define OMAP_LOGICAL_DMA_CH_COUNT 17
+/* Common channel specific registers for omap1 */
+#define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
+#define OMAP_DMA_CCR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
+#define OMAP_DMA_CICR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
+#define OMAP_DMA_CSR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
+#define OMAP_DMA_CEN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
+#define OMAP_DMA_CFN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
+#define OMAP_DMA_CSFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
+#define OMAP_DMA_CSEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
+#define OMAP_DMA_CSAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
+#define OMAP_DMA_CDAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
+#define OMAP_DMA_CDEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
+#define OMAP_DMA_CDFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
+#define OMAP_DMA_CLNK_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
+
+#else
+
+#define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA_CCR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80)
+#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84)
+#define OMAP_DMA_CICR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88)
+#define OMAP_DMA_CSR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c)
+#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90)
+#define OMAP_DMA_CEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94)
+#define OMAP_DMA_CFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98)
+#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4)
+#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8)
+#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac)
+#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0)
+#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4)
+#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8)
+
+#endif
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
+#define OMAP1_DMA_CCR2_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
+#define OMAP1_DMA_COLOR_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
+#define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+
+/* Channel specific registers only on omap2 */
+#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c)
+#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0)
+#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc)
+#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0)
+#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4)
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
#define OMAP_DMA_MCSI1_TX 1
#define OMAP_DMA_MCSI1_RX 2
#define OMAP_DMA_MMC2_RX 55
#define OMAP_DMA_CRYPTO_DES_OUT 56
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP24XX_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP_DMA_BASE (0xfffed800)
-#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400)
-#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404)
-#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408)
-#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442)
-#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444)
-#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446)
-#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448)
-#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a)
-#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c)
-#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e)
-#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450)
-#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452)
-#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454)
-#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456)
-#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458)
-#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a)
-#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460)
-#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480)
-#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482)
-#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0)
+#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP24XX_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP24XX_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* SDMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* SDMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* SDMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* SDMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* SDMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* SDMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* SDMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* SDMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* SDMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* SDMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* SDMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* SDMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* SDMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* SDMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* SDMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* SDMA_45 */
+#define OMAP24XX_DMA_UART1_TX 49 /* SDMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* SDMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* SDMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* SDMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* SDMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* SDMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* SDMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* SDMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* SDMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* SDMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* SDMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* SDMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */
+#define OMAP24XX_DMA_MS 63 /* SDMA_62 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
#define OMAP1510_DMA_LCD_BASE (0xfffedb00)
#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
#define OMAP1610_DMA_LCD_BASE (0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
-
-/* Every LCh has its own set of the registers below */
-#define OMAP_DMA_CSDP(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x00)
-#define OMAP_DMA_CCR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x02)
-#define OMAP_DMA_CICR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x04)
-#define OMAP_DMA_CSR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x06)
-#define OMAP_DMA_CSSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x08)
-#define OMAP_DMA_CSSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
-#define OMAP_DMA_CDSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
-#define OMAP_DMA_CDSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
-#define OMAP_DMA_CEN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x10)
-#define OMAP_DMA_CFN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x12)
-#define OMAP_DMA_CSFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x14)
-#define OMAP_DMA_CSEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x16)
-#define OMAP_DMA_CSAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x18)
-#define OMAP_DMA_CDAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
-#define OMAP_DMA_CDEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
-#define OMAP_DMA_CDFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
-#define OMAP_DMA_COLOR_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x20)
-#define OMAP_DMA_COLOR_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x22)
-#define OMAP_DMA_CCR2(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x24)
-#define OMAP_DMA_CLNK_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x28)
-#define OMAP_DMA_LCH_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
-
-#define OMAP_DMA_TOUT_IRQ (1 << 0)
+#define OMAP_DMA_TOUT_IRQ (1 << 0) /* Only on omap1 */
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
#define OMAP_DMA_FRAME_IRQ (1 << 3)
#define OMAP_DMA_LAST_IRQ (1 << 4)
#define OMAP_DMA_BLOCK_IRQ (1 << 5)
-#define OMAP_DMA_SYNC_IRQ (1 << 6)
+#define OMAP1_DMA_SYNC_IRQ (1 << 6)
+#define OMAP2_DMA_PKT_IRQ (1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
#define OMAP_DMA_DATA_TYPE_S8 0x00
#define OMAP_DMA_DATA_TYPE_S16 0x01
OMAP_LCD_DMA_B2_BOTTOM
};
+/* REVISIT: Check if BURST_4 is really 1 (or 2) */
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
OMAP_DMA_TRANSPARENT_COPY
};
+struct omap_dma_channel_params {
+ int data_type; /* data type 8,16,32 */
+ int elem_count; /* number of elements in a frame */
+ int frame_count; /* number of frames in a element */
+
+ int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int src_amode; /* constant , post increment, indexed , double indexed */
+ int src_start; /* source address : physical */
+ int src_ei; /* source element index */
+ int src_fi; /* source frame index */
+
+ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int dst_amode; /* constant , post increment, indexed , double indexed */
+ int dst_start; /* source address : physical */
+ int dst_ei; /* source element index */
+ int dst_fi; /* source frame index */
+
+ int trigger; /* trigger attached if the channel is synchronized */
+ int sync_mode; /* sycn on element, frame , block or packet */
+ int src_or_dst_synch; /* source synch(1) or destination synch(0) */
+
+ int ie; /* interrupt enabled */
+};
+
+
extern void omap_set_dma_priority(int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (* callback)(int lch, u16 ch_status, void *data),
extern void omap_stop_dma(int lch);
extern void omap_set_dma_transfer_params(int lch, int data_type,
int elem_count, int frame_count,
- int sync_mode);
+ int sync_mode,
+ int dma_trigger, int src_or_dst_synch);
extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
u32 color);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
- unsigned long src_start);
+ unsigned long src_start,
+ int src_ei, int src_fi);
extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
extern void omap_set_dma_src_data_pack(int lch, int enable);
extern void omap_set_dma_src_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
- unsigned long dest_start);
+ unsigned long dest_start,
+ int dst_ei, int dst_fi);
extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
extern void omap_set_dma_dest_data_pack(int lch, int enable);
extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
+extern void omap_set_dma_params(int lch,
+ struct omap_dma_channel_params * params);
+
extern void omap_dma_link_lch (int lch_head, int lch_queue);
extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
extern void omap_clear_dma(int lch);
extern int omap_dma_running(void);
-/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-extern int omap_dma_in_1510_mode(void);
-
/* LCD DMA functions */
extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
void *data);
#if defined(CONFIG_ARCH_OMAP1)
+#if defined(CONFIG_ARCH_OMAP730) && \
+ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ INT_1510_IH2_IRQ
+#endif
+
.macro disable_fiq
.endm
#ifndef __ASM_ARCH_OMAP_FPGA_H
#define __ASM_ARCH_OMAP_FPGA_H
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
extern void omap1510_fpga_init_irq(void);
#else
#define omap1510_fpga_init_irq() (0)
#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
/*
* ---------------------------------------------------------------------------
#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
IH_MPUIO_BASE + ((nr) & 0x0f) : \
- IH_GPIO_BASE + ((nr) & 0x3f))
+ IH_GPIO_BASE + (nr))
extern int omap_gpio_init(void); /* Call from board init only */
extern int omap_request_gpio(int gpio);
#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
-#ifndef __ASSEMBLER__
-
/*
* ---------------------------------------------------------------------------
* Processor specific defines
#include "omap730.h"
#include "omap1510.h"
-
-#ifdef CONFIG_ARCH_OMAP24XX
#include "omap24xx.h"
-#endif
-
#include "omap16xx.h"
+#ifndef __ASSEMBLER__
+
/*
* ---------------------------------------------------------------------------
* Board specific defines
* ----------------------------------------------------------------------------
*/
+#define PCIO_BASE 0
+
#if defined(CONFIG_ARCH_OMAP1)
+
#define IO_PHYS 0xFFFB0000
-#define IO_OFFSET -0x01000000 /* Virtual IO = 0xfefb0000 */
+#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
+#define IO_VIRT (IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define io_p2v(pa) ((pa) - IO_OFFSET)
+#define io_v2p(va) ((va) + IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
-#define IO_PHYS 0x48000000 /* L4 peripherals; other stuff has to be mapped *
- * manually. */
-#define IO_OFFSET 0x90000000 /* Virtual IO = 0xd8000000 */
-#define IO_SIZE 0x08000000
-#endif
-#define IO_VIRT (IO_PHYS + IO_OFFSET)
-#define IO_ADDRESS(x) ((x) + IO_OFFSET)
-#define PCIO_BASE 0
-#define io_p2v(x) ((x) + IO_OFFSET)
-#define io_v2p(x) ((x) - IO_OFFSET)
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
+#define L3_24XX_VIRT 0xf8000000
+#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
+#define L4_24XX_VIRT 0xd8000000
+#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
+#define IO_OFFSET 0x90000000
+#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
+
+#endif
#ifndef __ASSEMBLER__
* are different.
*/
-#ifndef __ASM_ARCH_OMAP1510_IRQS_H
-#define __ASM_ARCH_OMAP1510_IRQS_H
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
/*
* IRQ numbers for interrupt handler 1
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
-#define INT_IH2_IRQ 0
#define INT_CAMERA 1
#define INT_FIQ 3
#define INT_RTDX 6
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
+#define INT_1510_IH2_IRQ 0
#define INT_1510_RES2 2
#define INT_1510_SPI_TX 4
#define INT_1510_SPI_RX 5
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
+#define INT_1610_IH2_IRQ 0
#define INT_1610_IH2_FIQ 2
#define INT_1610_McBSP2_TX 4
#define INT_1610_McBSP2_RX 5
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
+#define INT_24XX_SYS_NIRQ 7
+#define INT_24XX_SDMA_IRQ0 12
+#define INT_24XX_SDMA_IRQ1 13
+#define INT_24XX_SDMA_IRQ2 14
+#define INT_24XX_SDMA_IRQ3 15
+#define INT_24XX_DSS_IRQ 25
#define INT_24XX_GPIO_BANK1 29
#define INT_24XX_GPIO_BANK2 30
#define INT_24XX_GPIO_BANK3 31
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 Local Bus address offset
virt_to_lbus(addr) : \
__virt_to_bus(addr);})
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
#endif
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-omap/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+extern void menelaus_mmc_register(void (*callback)(u8 card_mask),
+ unsigned long data);
+extern void menelaus_mmc_remove(void);
+extern void menelaus_mmc_opendrain(int enable);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus() 1
+#else
+#define omap_has_menelaus() 0
+#endif
+
+#endif
+
* Table of the Omap register configurations for the FUNC_MUX and
* PULL_DWN combinations.
*
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
.pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+ .mux_reg = OMAP730_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
+ .pull_reg = OMAP730_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#else
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
+#define MUX_REG_730(reg, mode_offset, mode) \
+ .mux_reg = OMAP730_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
PU_PD_REG(pu_pd_reg, pu_pd_status) \
},
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ * as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
+ pull_reg, pull_bit, pull_status, \
+ pu_pd_reg, pu_pd_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_730(mux_reg, mode_offset, mode) \
+ PULL_REG_730(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(pu_pd_reg, pu_pd_status) \
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode, \
+ pull_en, pull_mode, dbg) \
+{ \
+ .name = desc, \
+ .debug = dbg, \
+ .mux_reg = reg_offset, \
+ .mask = mode, \
+ .pull_val = pull_en, \
+ .pu_pd_val = pull_mode, \
+},
+
+
#define PULL_DISABLED 0
#define PULL_ENABLED 1
#define PULL_DOWN 0
#define PULL_UP 1
-typedef struct {
+struct pin_config {
char *name;
unsigned char busy;
unsigned char debug;
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
-} reg_cfg_set;
+};
-/*
- * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
- * device. See also reg_cfg_table below for the register values.
- */
-typedef enum {
+enum omap730_index {
+ /* OMAP 730 keyboard */
+ E2_730_KBR0,
+ J7_730_KBR1,
+ E1_730_KBR2,
+ F3_730_KBR3,
+ D2_730_KBR4,
+ C2_730_KBC0,
+ D3_730_KBC1,
+ E4_730_KBC2,
+ F4_730_KBC3,
+ E3_730_KBC4,
+};
+
+enum omap1xxx_index {
/* UART1 (BT_UART_GATING)*/
UART1_TX = 0,
UART1_RTS,
V10_1610_CF_IREQ,
W10_1610_CF_RESET,
W11_1610_CF_CD1,
-} reg_cfg_t;
+};
-#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
+enum omap24xx_index {
+ /* 24xx I2C */
+ M19_24XX_I2C1_SCL,
+ L15_24XX_I2C1_SDA,
+ J15_24XX_I2C2_SCL,
+ H19_24XX_I2C2_SDA,
-/*
- * Table of various FUNC_MUX and PULL_DWN combinations for each device.
- * See also reg_cfg_t above for the lookup table.
- */
-static const reg_cfg_set __initdata_or_module
-reg_cfg_table[] = {
-/*
- * description mux mode mux pull pull pull pu_pd pu dbg
- * reg offset mode reg bit ena reg
- */
-MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0)
-MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0)
-
-/* UART2 (COM_UART_GATING), conflicts with USB2 */
-MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0)
-MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0)
-MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0)
-MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0)
-
-/* UART3 (GIGA_UART_GATING) */
-MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0)
-MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0)
-MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0)
-MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0)
-MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0)
-MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0)
-MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0)
-
-/* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0)
-MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0)
-
-/* USB internal master generic */
-MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1)
-MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1)
-/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */
-MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1)
-MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1)
-MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1)
-MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1)
-
-/* USB1 master */
-MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1)
-MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1)
-MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1)
-MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1)
-MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1)
-MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1)
-MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1)
-MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1)
-MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1)
-MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1)
-MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1)
-
-/* USB2 master */
-MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1)
-MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1)
-MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1)
-MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1)
-MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1)
-MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1)
-MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1)
-
-/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1)
-MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1)
-MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1)
-
-/* OMAP1610 GPIO */
-MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1)
-MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1)
-
-/* OMAP-1710 GPIO */
-MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1)
-MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1)
-MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1)
-MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1)
-
-/* MPUIO */
-MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1)
-MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1)
-MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1)
-MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1)
-
-MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1)
-MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1)
-MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1)
-MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1)
-MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1)
-MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1)
-MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1)
-MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1)
-MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1)
-
-/* MCBSP2 */
-MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1)
-MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1)
-MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1)
-MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1)
-MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1)
-MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1)
-
-/* MCBSP3 NOTE: Mode must 1 for clock */
-MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1)
-
-/* Misc ballouts */
-MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1)
-MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0)
-
-/* OMAP-1610 MMC2 */
-MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1)
-MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1)
-MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1)
-MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1)
-MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1)
-MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1)
-MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1)
-MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1)
-MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1)
-MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1)
-
-/* OMAP-1610 External Trace Interface */
-MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1)
-MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1)
-MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1)
-MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1)
-MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1)
-MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1)
-
-/* OMAP16XX GPIO */
-MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1)
-MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1)
-MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1)
-MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1)
-MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1)
-MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1)
-MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1)
-MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1)
-MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1)
-MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1)
-MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0)
-MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0)
-MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0)
-
-/* OMAP-1610 uWire */
-MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1)
-MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1)
-MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1)
-MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1)
-MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1)
-MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1)
-
-/* OMAP-1610 Flash */
-MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1)
-MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1)
-
-/* First MMC interface, same on 1510, 1610 and 1710 */
-MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1)
-MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1)
-MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1)
-MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1)
-MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1)
-MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1)
-MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1)
-MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1)
-MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1)
-
-/* OMAP-1610 USB0 alternate configuration */
-MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1)
-MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1)
-MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1)
-MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1)
-MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1)
-MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1)
-MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1)
-MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1)
-
-/* USB2 interface */
-MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1)
-MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1)
-MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1)
-MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1)
-MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1)
-MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1)
-
-/* 16XX UART */
-MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1)
-MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1)
-MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1)
-MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1)
-MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1)
-MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1)
-
-/* I2C interface */
-MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0)
-MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0)
-
-/* Keypad */
-MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0)
-MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0)
-MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0)
-MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0)
-MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0)
-MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0)
-MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0)
-MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0)
-MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0)
-MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0)
-MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0)
-
-/* Power management */
-MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0)
-
-/* MCLK Settings */
-MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0)
-MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0)
-MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0)
-MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1)
-
-/* CompactFlash controller, conflicts with MMC1 */
-MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1)
-MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1)
-MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1)
-MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1)
-MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1)
-};
+ /* 24xx Menelaus interrupt */
+ W19_24XX_SYS_NIRQ,
-#endif /* __MUX_C__ */
+ /* 24xx GPIO */
+ Y20_24XX_GPIO60,
+ M15_24XX_GPIO92,
+};
#ifdef CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
-extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#endif
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP1510_H
-#define __ASM_ARCH_OMAP1510_H
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
/*
* ----------------------------------------------------------------------------
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
-#endif /* __ASM_ARCH_OMAP1510_H */
+#endif /* __ASM_ARCH_OMAP15XX_H */
#ifndef __ASM_ARCH_OMAP24XX_H
#define __ASM_ARCH_OMAP24XX_H
-#define OMAP24XX_L4_IO_BASE 0x48000000
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE 0x48000000
+#define L3_24XX_BASE 0x68000000
/* interrupt controller */
-#define OMAP24XX_IC_BASE (OMAP24XX_L4_IO_BASE + 0xfe000)
+#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
#define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
#define OMAP24XX_IVA_INTC_BASE 0x40000000
-
#define IRQ_SIR_IRQ 0x0040
+#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
+#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000)
+
#endif /* __ASM_ARCH_OMAP24XX_H */
--- /dev/null
+/*
+ * File: include/asm-arm/arch-omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
+#define OMAP_IO(num) _IO('O', num)
+
+#define OMAPFB_MIRROR OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX OMAP_IO(37)
+#define OMAPFB_VSYNC OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, enum omapfb_update_mode)
+#define OMAPFB_GET_CAPS OMAP_IOR(42, unsigned long)
+#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, enum omapfb_update_mode)
+#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW OMAP_IOW(47, struct omapfb_update_window)
+#define OMAPFB_SETUP_PLANE OMAP_IOW(48, struct omapfb_setup_plane)
+#define OMAPFB_ENABLE_PLANE OMAP_IOW(49, struct omapfb_enable_plane)
+#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
+
+#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK 0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
+#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK 0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
+
+enum omapfb_color_format {
+ OMAPFB_COLOR_RGB565 = 0,
+ OMAPFB_COLOR_YUV422,
+ OMAPFB_COLOR_YUV420,
+ OMAPFB_COLOR_CLUT_8BPP,
+ OMAPFB_COLOR_CLUT_4BPP,
+ OMAPFB_COLOR_CLUT_2BPP,
+ OMAPFB_COLOR_CLUT_1BPP,
+};
+
+struct omapfb_update_window {
+ u32 x, y;
+ u32 width, height;
+ u32 format;
+};
+
+enum omapfb_plane {
+ OMAPFB_PLANE_GFX = 0,
+ OMAPFB_PLANE_VID1,
+ OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+ OMAPFB_CHANNEL_OUT_LCD = 0,
+ OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_setup_plane {
+ u8 plane;
+ u8 channel_out;
+ u32 offset;
+ u32 pos_x, pos_y;
+ u32 width, height;
+ u32 color_mode;
+};
+
+struct omapfb_enable_plane {
+ u8 plane;
+ u8 enable;
+};
+
+enum omapfb_color_key_type {
+ OMAPFB_COLOR_KEY_DISABLED = 0,
+ OMAPFB_COLOR_KEY_GFX_DST,
+ OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+ u8 channel_out;
+ u32 background;
+ u32 trans_key;
+ u8 key_type;
+};
+
+enum omapfb_update_mode {
+ OMAPFB_UPDATE_DISABLED = 0,
+ OMAPFB_AUTO_UPDATE,
+ OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#define OMAP_LCDC_INV_VSYNC 0x0001
+#define OMAP_LCDC_INV_HSYNC 0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK 0x003f
+
+#define OMAP_LCDC_PANEL_TFT 0x0100
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM 1
+#else
+#define OMAPFB_PLANE_NUM 3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+ const char *name;
+ int config; /* TFT/STN, signal inversion */
+ int bpp; /* Pixel format in fb mem */
+ int data_lines; /* Lines on LCD HW interface */
+
+ int x_res, y_res;
+ int pixel_clock; /* In kHz */
+ int hsw; /* Horizontal synchronization
+ pulse width */
+ int hfp; /* Horizontal front porch */
+ int hbp; /* Horizontal back porch */
+ int vsw; /* Vertical synchronization
+ pulse width */
+ int vfp; /* Vertical front porch */
+ int vbp; /* Vertical back porch */
+ int acb; /* ac-bias pin frequency */
+ int pcd; /* pixel clock divider.
+ Obsolete use pixel_clock instead */
+
+ int (*init) (struct omapfb_device *fbdev);
+ void (*cleanup) (void);
+ int (*enable) (void);
+ void (*disable) (void);
+ unsigned long (*get_caps) (void);
+ int (*set_bklight_level)(unsigned int level);
+ unsigned int (*get_bklight_level)(void);
+ unsigned int (*get_bklight_max) (void);
+ int (*run_test) (int test_num);
+};
+
+struct omapfb_device;
+
+struct extif_timings {
+ int cs_on_time;
+ int cs_off_time;
+ int we_on_time;
+ int we_off_time;
+ int re_on_time;
+ int re_off_time;
+ int we_cycle_time;
+ int re_cycle_time;
+ int cs_pulse_width;
+ int access_time;
+};
+
+struct lcd_ctrl_extif {
+ int (*init) (void);
+ void (*cleanup) (void);
+ void (*set_timings) (const struct extif_timings *timings);
+ void (*write_command) (u32 cmd);
+ u32 (*read_data) (void);
+ void (*write_data) (u32 data);
+ void (*transfer_area) (int width, int height,
+ void (callback)(void * data), void *data);
+};
+
+struct lcd_ctrl {
+ const char *name;
+ void *data;
+
+ int (*init) (struct omapfb_device *fbdev,
+ int ext_mode, int req_vram_size);
+ void (*cleanup) (void);
+ void (*get_vram_layout)(unsigned long *size,
+ void **virt_base,
+ dma_addr_t *phys_base);
+ unsigned long (*get_caps) (void);
+ int (*set_update_mode)(enum omapfb_update_mode mode);
+ enum omapfb_update_mode (*get_update_mode)(void);
+ int (*setup_plane) (int plane, int channel_out,
+ unsigned long offset,
+ int screen_width,
+ int pos_x, int pos_y, int width,
+ int height, int color_mode);
+ int (*enable_plane) (int plane, int enable);
+ int (*update_window) (struct omapfb_update_window *win,
+ void (*callback)(void *),
+ void *callback_data);
+ void (*sync) (void);
+ void (*suspend) (void);
+ void (*resume) (void);
+ int (*run_test) (int test_num);
+ int (*setcolreg) (u_int regno, u16 red, u16 green,
+ u16 blue, u16 transp,
+ int update_hw_mem);
+ int (*set_color_key) (struct omapfb_color_key *ck);
+
+};
+
+enum omapfb_state {
+ OMAPFB_DISABLED = 0,
+ OMAPFB_SUSPENDED= 99,
+ OMAPFB_ACTIVE = 100
+};
+
+struct omapfb_device {
+ int state;
+ int ext_lcdc; /* Using external
+ LCD controller */
+ struct semaphore rqueue_sema;
+
+ void *vram_virt_base;
+ dma_addr_t vram_phys_base;
+ unsigned long vram_size;
+
+ int color_mode;
+ int palette_size;
+ int mirror;
+ u32 pseudo_palette[17];
+
+ struct lcd_panel *panel; /* LCD panel */
+ struct lcd_ctrl *ctrl; /* LCD controller */
+ struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
+ interface */
+ struct fb_info *fb_info;
+
+ struct device *dev;
+};
+
+extern struct lcd_panel h3_panel;
+extern struct lcd_panel h2_panel;
+extern struct lcd_panel p2_panel;
+extern struct lcd_panel osk_panel;
+extern struct lcd_panel innovator1610_panel;
+extern struct lcd_panel innovator1510_panel;
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
#define OMAP1610_IDLECT3 0xfffece24
#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
-#if !defined(CONFIG_ARCH_OMAP1510) && \
+#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
+#define OMAP730_IDLECT3_VAL 0x3f
+#define OMAP730_IDLECT3 0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
+
+#if !defined(CONFIG_ARCH_OMAP730) && \
+ !defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX) && \
!defined(CONFIG_ARCH_OMAP24XX)
#error "Power management for this processor not implemented yet"
#ifndef __ASSEMBLER__
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
#define omap_serial_wake_trigger(x) {}
#endif /* CONFIG_OMAP_SERIAL_WAKE */
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_ARCH_OMAP15XX)
MPUI1510_SLEEP_SAVE_SIZE
#else
MPUI1510_SLEEP_SAVE_SIZE = 0
#endif
};
+enum mpui730_save_state {
+ MPUI730_SLEEP_SAVE_START = 0,
+ /*
+ * MPUI registers 32 bits
+ */
+ MPUI730_SLEEP_SAVE_MPUI_CTRL,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+ MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+ MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+ MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+ MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+ MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+ MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+ MPUI730_SLEEP_SAVE_SIZE
+#else
+ MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
enum mpui1610_save_state {
MPUI1610_SLEEP_SAVE_START = 0,
/*
--- /dev/null
+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL PRCM_REG32(0x050)
+#define PRCM_VOLTST PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP PRCM_REG32(0x094)
+#define PRCM_POLCTRL PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148)
+#define RM_RSTST_MPU PRCM_REG32(0x158)
+#define PM_WKDEP_MPU PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248)
+#define PM_WKEN1_CORE PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX PRCM_REG32(0x310)
+#define CM_IDLEST_GFX PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX PRCM_REG32(0x350)
+#define RM_RSTST_GFX PRCM_REG32(0x358)
+#define PM_WKDEP_GFX PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP PRCM_REG32(0x454)
+#define RM_RSTST_WKUP PRCM_REG32(0x458)
+#define PM_WKEN_WKUP PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP PRCM_REG32(0x810)
+#define CM_IDLEST_DSP PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP PRCM_REG32(0x830)
+#define CM_CLKSEL_DSP PRCM_REG32(0x840)
+#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848)
+#define RM_RSTCTRL_DSP PRCM_REG32(0x850)
+#define RM_RSTST_DSP PRCM_REG32(0x858)
+#define PM_WKEN_DSP PRCM_REG32(0x8A0)
+#define PM_WKDEP_DSP PRCM_REG32(0x8C8)
+#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0)
+#define PM_PWSTST_DSP PRCM_REG32(0x8E4)
+#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0)
+#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4)
+
+/* IVA */
+#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8)
+#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC)
+
+/* Modem on 2430 */
+#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
+#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
+#define CM_IDLEST_MDM PRCM_REG32(0xC20)
+#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
+
+/* FIXME: Move to header for 2430 */
+#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
+#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
+
+#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
+#define GPMC_BASE (OMAP24XX_GPMC_BASE)
+#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
+
+#define GPT1_BASE (OMAP24XX_GPT1)
+#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
+
+/* Misc sysconfig */
+#define DISPC_SYSCONFIG DISP_REG32(0x410)
+#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
+#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
+#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
+
+//#define DSP_MMU_SYSCONFIG 0x5A000010
+#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
+//#define IVA_MMU_SYSCONFIG 0x5D000010
+//#define DSP_DMA_SYSCONFIG 0x00FCC02C
+#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
+#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
+#define GPMC_SYSCONFIG GPMC_REG32(0x010)
+#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
+#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
+#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
+#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
+//#define IVA_SYSCONFIG 0x5C060010
+#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
+#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
+#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
+//#define VLYNQ_SYSCONFIG 0x67FFFE10
+
+/* rkw - good cannidates for PM_ to start what nm was trying */
+#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
+#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
+#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
+#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
+#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
+#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
+#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
+#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
+#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
+#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
+#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
+
+#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
+#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
+#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
+#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10)
+#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10)
+#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10)
+#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10)
+#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10)
+#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10)
+#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10)
+#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
+#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
+
+#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+
+#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
+#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
+#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
+#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
+
+/* GP TIMER 1 */
+#define GPTIMER1_TISTAT GPT1_REG32(0x014)
+#define GPTIMER1_TISR GPT1_REG32(0x018)
+#define GPTIMER1_TIER GPT1_REG32(0x01C)
+#define GPTIMER1_TWER GPT1_REG32(0x020)
+#define GPTIMER1_TCLR GPT1_REG32(0x024)
+#define GPTIMER1_TCRR GPT1_REG32(0x028)
+#define GPTIMER1_TLDR GPT1_REG32(0x02C)
+#define GPTIMER1_TTGR GPT1_REG32(0x030)
+#define GPTIMER1_TWPS GPT1_REG32(0x034)
+#define GPTIMER1_TMAR GPT1_REG32(0x038)
+#define GPTIMER1_TCAR1 GPT1_REG32(0x03C)
+#define GPTIMER1_TSICR GPT1_REG32(0x040)
+#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
+
+/* rkw -- base fix up please... */
+#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
+
+/* SDRC */
+#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
+#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
+#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
+#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
+#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
+#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
+
+/* GPIO 1 */
+#define GPIO1_BASE GPIOX_BASE(1)
+#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset))
+#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C)
+#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018)
+#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C)
+#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028)
+#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020)
+#define GPIO1_RISINGDETECT GPIO1_REG32(0x048)
+#define GPIO1_DATAIN GPIO1_REG32(0x038)
+#define GPIO1_OE GPIO1_REG32(0x034)
+#define GPIO1_DATAOUT GPIO1_REG32(0x03C)
+
+/* GPIO2 */
+#define GPIO2_BASE GPIOX_BASE(2)
+#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset))
+#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C)
+#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018)
+#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C)
+#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028)
+#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020)
+#define GPIO2_RISINGDETECT GPIO2_REG32(0x048)
+#define GPIO2_DATAIN GPIO2_REG32(0x038)
+#define GPIO2_OE GPIO2_REG32(0x034)
+#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
+
+/* GPIO 3 */
+#define GPIO3_BASE GPIOX_BASE(3)
+#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset))
+#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C)
+#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018)
+#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C)
+#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028)
+#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020)
+#define GPIO3_RISINGDETECT GPIO3_REG32(0x048)
+#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C)
+#define GPIO3_DATAIN GPIO3_REG32(0x038)
+#define GPIO3_OE GPIO3_REG32(0x034)
+#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
+#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
+
+/* GPIO 4 */
+#define GPIO4_BASE GPIOX_BASE(4)
+#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset))
+#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C)
+#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018)
+#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C)
+#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028)
+#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020)
+#define GPIO4_RISINGDETECT GPIO4_REG32(0x048)
+#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C)
+#define GPIO4_DATAIN GPIO4_REG32(0x038)
+#define GPIO4_OE GPIO4_REG32(0x034)
+#define GPIO4_DATAOUT GPIO4_REG32(0x03C)
+#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
+#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
+
+
+/* IO CONFIG */
+#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
+#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
+
+#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
+#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
+#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8)
+#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
+#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
+#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
+#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
+#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
+
+/* CONTROL */
+#define CONTROL_DEVCONF CONTROL_REG32(0x274)
+
+/* INTERRUPT CONTROLLER */
+#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
+
+#define INTC1_U_BASE INTC_REG32(0x000)
+#define INTC_MIR0 INTC_REG32(0x084)
+#define INTC_MIR_SET0 INTC_REG32(0x08C)
+#define INTC_MIR_CLEAR0 INTC_REG32(0x088)
+#define INTC_ISR_CLEAR0 INTC_REG32(0x094)
+#define INTC_MIR1 INTC_REG32(0x0A4)
+#define INTC_MIR_SET1 INTC_REG32(0x0AC)
+#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8)
+#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4)
+#define INTC_MIR2 INTC_REG32(0x0C4)
+#define INTC_MIR_SET2 INTC_REG32(0x0CC)
+#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8)
+#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
+#define INTC_SIR_IRQ INTC_REG32(0x040)
+#define INTC_CONTROL INTC_REG32(0x048)
+#define INTC_ILR11 INTC_REG32(0x12C)
+#define INTC_ILR32 INTC_REG32(0x180)
+#define INTC_ILR37 INTC_REG32(0x194)
+#define INTC_SYSCONFIG INTC_REG32(0x010)
+
+/* RAM FIREWALL */
+#define RAMFW_BASE (0x68005000)
+#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset))
+
+#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048)
+#define RAMFW_READPERM0 RAMFW_REG32(0x050)
+#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058)
+
+/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
+//#define DEBUG_BOARD_LED_REGISTER 0x04000014
+
+/* GPMC CS0 */
+#define GPMC_CONFIG1_0 GPMC_REG32(0x060)
+#define GPMC_CONFIG2_0 GPMC_REG32(0x064)
+#define GPMC_CONFIG3_0 GPMC_REG32(0x068)
+#define GPMC_CONFIG4_0 GPMC_REG32(0x06C)
+#define GPMC_CONFIG5_0 GPMC_REG32(0x070)
+#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
+#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
+
+/* GPMC CS1 */
+#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
+#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
+#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
+#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
+#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
+#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
+#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
+
+/* DSS */
+#define DSS_CONTROL DISP_REG32(0x040)
+#define DISPC_CONTROL DISP_REG32(0x440)
+#define DISPC_SYSSTATUS DISP_REG32(0x414)
+#define DISPC_IRQSTATUS DISP_REG32(0x418)
+#define DISPC_IRQENABLE DISP_REG32(0x41C)
+#define DISPC_CONFIG DISP_REG32(0x444)
+#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C)
+#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450)
+#define DISPC_TRANS_COLOR0 DISP_REG32(0x454)
+#define DISPC_TRANS_COLOR1 DISP_REG32(0x458)
+#define DISPC_LINE_NUMBER DISP_REG32(0x460)
+#define DISPC_TIMING_H DISP_REG32(0x464)
+#define DISPC_TIMING_V DISP_REG32(0x468)
+#define DISPC_POL_FREQ DISP_REG32(0x46C)
+#define DISPC_DIVISOR DISP_REG32(0x470)
+#define DISPC_SIZE_DIG DISP_REG32(0x478)
+#define DISPC_SIZE_LCD DISP_REG32(0x47C)
+#define DISPC_GFX_BA0 DISP_REG32(0x480)
+#define DISPC_GFX_BA1 DISP_REG32(0x484)
+#define DISPC_GFX_POSITION DISP_REG32(0x488)
+#define DISPC_GFX_SIZE DISP_REG32(0x48C)
+#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0)
+#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4)
+#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC)
+#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0)
+#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4)
+#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8)
+#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4)
+#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
+#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
+
+/* Wake up define for board */
+#define GPIO97 (1 << 1)
+#define GPIO88 (1 << 24)
+
+#endif /* __ASSEMBLER__ */
+
+#endif
+
+
+
+
+
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-omap/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+
+/* Do not use these */
+extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long sram_reprogram_clock_sz;
+
+extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long sram_ddr_init_sz;
+
+extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern unsigned long sram_set_prcm_sz;
+
+extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
+extern unsigned long sram_reprogram_sdrc_sz;
+
+#endif
#define __ASM_ARCH_SYSTEM_H
#include <linux/config.h>
#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
#include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
+#include <asm/arch/prcm.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset() do {} while (0)
+#endif
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void omap1_arch_reset(char mode)
{
-
-#ifdef CONFIG_ARCH_OMAP16XX
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
* "Global Software Reset Affects Traffic Controller Frequency".
DPLL_CTL);
omap_writew(0x8, ARM_RSTCT1);
}
-#endif
-#ifdef CONFIG_MACH_VOICEBLUE
+
if (machine_is_voiceblue())
voiceblue_reset();
else
-#endif
omap_writew(1, ARM_RSTCT1);
}
+static inline void omap2_arch_reset(char mode)
+{
+ u32 rate;
+ struct clk *vclk, *sclk;
+
+ vclk = clk_get(NULL, "virt_prcm_set");
+ sclk = clk_get(NULL, "sys_ck");
+ rate = clk_get_rate(sclk);
+ clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
+ RM_RSTCTRL_WKUP |= 2;
+}
+
+static inline void arch_reset(char mode)
+{
+ if (!cpu_is_omap24xx())
+ omap1_arch_reset(mode);
+ else
+ omap2_arch_reset(mode);
+}
+
#endif
#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
#define __ASM_ARCH_OMAP_TIMEX_H
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ)
+#else
#define CLOCK_TICK_RATE (HZ * 100000UL)
+#endif
#endif /* __ASM_ARCH_OMAP_TIMEX_H */
volatile u8 * uart = 0;
int shift = 2;
+#ifdef CONFIG_MACH_OMAP_PALMTE
+ return;
+#endif
+
#ifdef CONFIG_ARCH_OMAP
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif CONFIG_OMAP_LL_DEBUG_UART2
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
uart = (volatile u8 *)(OMAP_UART2_BASE);
#else
uart = (volatile u8 *)(OMAP_UART1_BASE);
projects / platform / kernel / linux-3.10.git / commitdiff