This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
imply SYS_THUMB_BUILD
imply ARCH_MISC_INIT if DISPLAY_CPUINFO
-config TARGET_S32V234EVB
- bool "Support s32v234evb"
- select ARM64
- select SYS_FSL_ERRATUM_ESDHC111
-
config ARCH_SNAPDRAGON
bool "Qualcomm Snapdragon SoCs"
select ARM64
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
source "board/freescale/lx2160a/Kconfig"
-source "board/freescale/s32v234evb/Kconfig"
source "board/grinn/chiliboard/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/hisilicon/hikey960/Kconfig"
!TARGET_LS1046AFRWY && \
!TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
!TARGET_LX2160AQDS && !TARGET_LX2162AQDS && \
- !ARCH_UNIPHIER && !TARGET_S32V234EVB
+ !ARCH_UNIPHIER
help
Most armv8 systems have PSCI support enabled in EL3, either through
ARM Trusted Firmware or other firmware.
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2013-2016, Freescale Semiconductor, Inc.
-
-obj-y += generic.o
-obj-y += cpu.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2014-2016, Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/armv8/mmu.h>
-#include <asm/io.h>
-#include <asm/arch/mc_me_regs.h>
-#include <linux/bitops.h>
-#include "cpu.h"
-
-u32 cpu_mask(void)
-{
- return readl(MC_ME_CS);
-}
-
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-
-#define S32V234_IRAM_BASE 0x3e800000UL
-#define S32V234_IRAM_SIZE 0x800000UL
-#define S32V234_DRAM_BASE1 0x80000000UL
-#define S32V234_DRAM_SIZE1 0x40000000UL
-#define S32V234_DRAM_BASE2 0xC0000000UL
-#define S32V234_DRAM_SIZE2 0x20000000UL
-#define S32V234_PERIPH_BASE 0x40000000UL
-#define S32V234_PERIPH_SIZE 0x40000000UL
-
-static struct mm_region s32v234_mem_map[] = {
- {
- .virt = S32V234_IRAM_BASE,
- .phys = S32V234_IRAM_BASE,
- .size = S32V234_IRAM_SIZE,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_OUTER_SHARE
- }, {
- .virt = S32V234_DRAM_BASE1,
- .phys = S32V234_DRAM_BASE1,
- .size = S32V234_DRAM_SIZE1,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_OUTER_SHARE
- }, {
- .virt = S32V234_PERIPH_BASE,
- .phys = S32V234_PERIPH_BASE,
- .size = S32V234_PERIPH_SIZE,
- .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
- PTE_BLOCK_NON_SHARE
- /* TODO: Do we need these? */
- /* | PTE_BLOCK_PXN | PTE_BLOCK_UXN */
- }, {
- .virt = S32V234_DRAM_BASE2,
- .phys = S32V234_DRAM_BASE2,
- .size = S32V234_DRAM_SIZE2,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
- PTE_BLOCK_OUTER_SHARE
- }, {
- /* List terminator */
- 0,
- }
-};
-
-struct mm_region *mem_map = s32v234_mem_map;
-
-#endif
-
-/*
- * Return the number of cores on this SOC.
- */
-int cpu_numcores(void)
-{
- int numcores;
- u32 mask;
-
- mask = cpu_mask();
- numcores = hweight32(cpu_mask());
-
- /* Verify if M4 is deactivated */
- if (mask & 0x1)
- numcores--;
-
- return numcores;
-}
-
-#if defined(CONFIG_ARCH_EARLY_INIT_R)
-int arch_early_init_r(void)
-{
- int rv;
- asm volatile ("dsb sy");
- rv = fsl_s32v234_wake_seconday_cores();
-
- if (rv)
- printf("Did not wake secondary cores\n");
-
- asm volatile ("sev");
- return 0;
-}
-#endif /* CONFIG_ARCH_EARLY_INIT_R */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2014-2016, Freescale Semiconductor, Inc.
- */
-
-u32 cpu_mask(void);
-int cpu_numcores(void);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013-2016, Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mc_cgm_regs.h>
-#include <asm/arch/mc_me_regs.h>
-#include <asm/arch/mc_rgm_regs.h>
-#include <netdev.h>
-#include <div64.h>
-#include <errno.h>
-
-u32 get_cpu_rev(void)
-{
- struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_BASE_ADDR;
- u32 cpu = readl(&mscmir->cpxtype);
-
- return cpu;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uintptr_t get_pllfreq(u32 pll, u32 refclk_freq, u32 plldv,
- u32 pllfd, u32 selected_output)
-{
- u32 vco = 0, plldv_prediv = 0, plldv_mfd = 0, pllfd_mfn = 0;
- u32 plldv_rfdphi_div = 0, fout = 0;
- u32 dfs_portn = 0, dfs_mfn = 0, dfs_mfi = 0;
-
- if (selected_output > DFS_MAXNUMBER) {
- return -1;
- }
-
- plldv_prediv =
- (plldv & PLLDIG_PLLDV_PREDIV_MASK) >> PLLDIG_PLLDV_PREDIV_OFFSET;
- plldv_mfd = (plldv & PLLDIG_PLLDV_MFD_MASK);
-
- pllfd_mfn = (pllfd & PLLDIG_PLLFD_MFN_MASK);
-
- plldv_prediv = plldv_prediv == 0 ? 1 : plldv_prediv;
-
- /* The formula for VCO is from TR manual, rev. D */
- vco = refclk_freq / plldv_prediv * (plldv_mfd + pllfd_mfn / 20481);
-
- if (selected_output != 0) {
- /* Determine the RFDPHI for PHI1 */
- plldv_rfdphi_div =
- (plldv & PLLDIG_PLLDV_RFDPHI1_MASK) >>
- PLLDIG_PLLDV_RFDPHI1_OFFSET;
- plldv_rfdphi_div = plldv_rfdphi_div == 0 ? 1 : plldv_rfdphi_div;
- if (pll == ARM_PLL || pll == ENET_PLL || pll == DDR_PLL) {
- dfs_portn =
- readl(DFS_DVPORTn(pll, selected_output - 1));
- dfs_mfi =
- (dfs_portn & DFS_DVPORTn_MFI_MASK) >>
- DFS_DVPORTn_MFI_OFFSET;
- dfs_mfn =
- (dfs_portn & DFS_DVPORTn_MFI_MASK) >>
- DFS_DVPORTn_MFI_OFFSET;
- fout = vco / (dfs_mfi + (dfs_mfn / 256));
- } else {
- fout = vco / plldv_rfdphi_div;
- }
-
- } else {
- /* Determine the RFDPHI for PHI0 */
- plldv_rfdphi_div =
- (plldv & PLLDIG_PLLDV_RFDPHI_MASK) >>
- PLLDIG_PLLDV_RFDPHI_OFFSET;
- fout = vco / plldv_rfdphi_div;
- }
-
- return fout;
-
-}
-
-/* Implemented for ARMPLL, PERIPH_PLL, ENET_PLL, DDR_PLL, VIDEO_LL */
-static uintptr_t decode_pll(enum pll_type pll, u32 refclk_freq,
- u32 selected_output)
-{
- u32 plldv, pllfd;
-
- plldv = readl(PLLDIG_PLLDV(pll));
- pllfd = readl(PLLDIG_PLLFD(pll));
-
- return get_pllfreq(pll, refclk_freq, plldv, pllfd, selected_output);
-}
-
-static u32 get_mcu_main_clk(void)
-{
- u32 coreclk_div;
- u32 sysclk_sel;
- u32 freq = 0;
-
- sysclk_sel = readl(CGM_SC_SS(MC_CGM1_BASE_ADDR)) & MC_CGM_SC_SEL_MASK;
- sysclk_sel >>= MC_CGM_SC_SEL_OFFSET;
-
- coreclk_div =
- readl(CGM_SC_DCn(MC_CGM1_BASE_ADDR, 0)) & MC_CGM_SC_DCn_PREDIV_MASK;
- coreclk_div >>= MC_CGM_SC_DCn_PREDIV_OFFSET;
- coreclk_div += 1;
-
- switch (sysclk_sel) {
- case MC_CGM_SC_SEL_FIRC:
- freq = FIRC_CLK_FREQ;
- break;
- case MC_CGM_SC_SEL_XOSC:
- freq = XOSC_CLK_FREQ;
- break;
- case MC_CGM_SC_SEL_ARMPLL:
- /* ARMPLL has as source XOSC and CORE_CLK has as input PHI0 */
- freq = decode_pll(ARM_PLL, XOSC_CLK_FREQ, 0);
- break;
- case MC_CGM_SC_SEL_CLKDISABLE:
- printf("Sysclk is disabled\n");
- break;
- default:
- printf("unsupported system clock select\n");
- }
-
- return freq / coreclk_div;
-}
-
-static u32 get_sys_clk(u32 number)
-{
- u32 sysclk_div, sysclk_div_number;
- u32 sysclk_sel;
- u32 freq = 0;
-
- switch (number) {
- case 3:
- sysclk_div_number = 0;
- break;
- case 6:
- sysclk_div_number = 1;
- break;
- default:
- printf("unsupported system clock \n");
- return -1;
- }
- sysclk_sel = readl(CGM_SC_SS(MC_CGM0_BASE_ADDR)) & MC_CGM_SC_SEL_MASK;
- sysclk_sel >>= MC_CGM_SC_SEL_OFFSET;
-
- sysclk_div =
- readl(CGM_SC_DCn(MC_CGM1_BASE_ADDR, sysclk_div_number)) &
- MC_CGM_SC_DCn_PREDIV_MASK;
- sysclk_div >>= MC_CGM_SC_DCn_PREDIV_OFFSET;
- sysclk_div += 1;
-
- switch (sysclk_sel) {
- case MC_CGM_SC_SEL_FIRC:
- freq = FIRC_CLK_FREQ;
- break;
- case MC_CGM_SC_SEL_XOSC:
- freq = XOSC_CLK_FREQ;
- break;
- case MC_CGM_SC_SEL_ARMPLL:
- /* ARMPLL has as source XOSC and SYSn_CLK has as input DFS1 */
- freq = decode_pll(ARM_PLL, XOSC_CLK_FREQ, 1);
- break;
- case MC_CGM_SC_SEL_CLKDISABLE:
- printf("Sysclk is disabled\n");
- break;
- default:
- printf("unsupported system clock select\n");
- }
-
- return freq / sysclk_div;
-}
-
-static u32 get_peripherals_clk(void)
-{
- u32 aux5clk_div;
- u32 freq = 0;
-
- aux5clk_div =
- readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 5, 0)) &
- MC_CGM_ACn_DCm_PREDIV_MASK;
- aux5clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET;
- aux5clk_div += 1;
-
- freq = decode_pll(PERIPH_PLL, XOSC_CLK_FREQ, 0);
-
- return freq / aux5clk_div;
-
-}
-
-static u32 get_uart_clk(void)
-{
- u32 auxclk3_div, auxclk3_sel, freq = 0;
-
- auxclk3_sel =
- readl(CGM_ACn_SS(MC_CGM0_BASE_ADDR, 3)) & MC_CGM_ACn_SEL_MASK;
- auxclk3_sel >>= MC_CGM_ACn_SEL_OFFSET;
-
- auxclk3_div =
- readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 3, 0)) &
- MC_CGM_ACn_DCm_PREDIV_MASK;
- auxclk3_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET;
- auxclk3_div += 1;
-
- switch (auxclk3_sel) {
- case MC_CGM_ACn_SEL_FIRC:
- freq = FIRC_CLK_FREQ;
- break;
- case MC_CGM_ACn_SEL_XOSC:
- freq = XOSC_CLK_FREQ;
- break;
- case MC_CGM_ACn_SEL_PERPLLDIVX:
- freq = get_peripherals_clk() / 3;
- break;
- case MC_CGM_ACn_SEL_SYSCLK:
- freq = get_sys_clk(6);
- break;
- default:
- printf("unsupported system clock select\n");
- }
-
- return freq / auxclk3_div;
-}
-
-static u32 get_fec_clk(void)
-{
- u32 aux2clk_div;
- u32 freq = 0;
-
- aux2clk_div =
- readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 2, 0)) &
- MC_CGM_ACn_DCm_PREDIV_MASK;
- aux2clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET;
- aux2clk_div += 1;
-
- freq = decode_pll(ENET_PLL, XOSC_CLK_FREQ, 0);
-
- return freq / aux2clk_div;
-}
-
-static u32 get_usdhc_clk(void)
-{
- u32 aux15clk_div;
- u32 freq = 0;
-
- aux15clk_div =
- readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 15, 0)) &
- MC_CGM_ACn_DCm_PREDIV_MASK;
- aux15clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET;
- aux15clk_div += 1;
-
- freq = decode_pll(ENET_PLL, XOSC_CLK_FREQ, 4);
-
- return freq / aux15clk_div;
-}
-
-static u32 get_i2c_clk(void)
-{
- return get_peripherals_clk();
-}
-
-/* return clocks in Hz */
-unsigned int mxc_get_clock(enum mxc_clock clk)
-{
- switch (clk) {
- case MXC_ARM_CLK:
- return get_mcu_main_clk();
- case MXC_PERIPHERALS_CLK:
- return get_peripherals_clk();
- case MXC_UART_CLK:
- return get_uart_clk();
- case MXC_FEC_CLK:
- return get_fec_clk();
- case MXC_I2C_CLK:
- return get_i2c_clk();
- case MXC_USDHC_CLK:
- return get_usdhc_clk();
- default:
- break;
- }
- printf("Error: Unsupported function to read the frequency! \
- Please define it correctly!");
- return -1;
-}
-
-/* Not yet implemented - int soc_clk_dump(); */
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-static char *get_reset_cause(void)
-{
- u32 cause = readl(MC_RGM_BASE_ADDR + 0x300);
-
- switch (cause) {
- case F_SWT4:
- return "WDOG";
- case F_JTAG:
- return "JTAG";
- case F_FCCU_SOFT:
- return "FCCU soft reaction";
- case F_FCCU_HARD:
- return "FCCU hard reaction";
- case F_SOFT_FUNC:
- return "Software Functional reset";
- case F_ST_DONE:
- return "Self Test done reset";
- case F_EXT_RST:
- return "External reset";
- default:
- return "unknown reset";
- }
-
-}
-
-#define SRC_SCR_SW_RST (1<<12)
-
-void reset_cpu(void)
-{
- printf("Feature not supported.\n");
-};
-
-int print_cpuinfo(void)
-{
- printf("CPU: Freescale Treerunner S32V234 at %d MHz\n",
- mxc_get_clock(MXC_ARM_CLK) / 1000000);
- printf("Reset cause: %s\n", get_reset_cause());
-
- return 0;
-}
-#endif
-
-int cpu_eth_init(struct bd_info * bis)
-{
- int rc = -ENODEV;
-
-#if defined(CONFIG_FEC_MXC)
- rc = fecmxc_initialize(bis);
-#endif
-
- return rc;
-}
-
-int get_clocks(void)
-{
-#ifdef CONFIG_FSL_ESDHC_IMX
- gd->arch.sdhc_clk = mxc_get_clock(MXC_USDHC_CLK);
-#endif
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015-2016, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-enum mxc_clock {
- MXC_ARM_CLK = 0,
- MXC_BUS_CLK,
- MXC_PERIPHERALS_CLK,
- MXC_UART_CLK,
- MXC_USDHC_CLK,
- MXC_FEC_CLK,
- MXC_I2C_CLK,
-};
-enum pll_type {
- ARM_PLL = 0,
- PERIPH_PLL,
- ENET_PLL,
- DDR_PLL,
- VIDEO_PLL,
-};
-
-unsigned int mxc_get_clock(enum mxc_clock clk);
-void clock_init(void);
-
-#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
-
-#endif /* __ASM_ARCH_CLOCK_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015-2016, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_DDR_H__
-#define __ARCH_ARM_MACH_S32V234_DDR_H__
-
-#define DDR0 0
-#define DDR1 1
-
-/* DDR offset in MSCR register */
-#define _DDR0_RESET 168
-#define _DDR0_CLK0 169
-#define _DDR0_CAS 170
-#define _DDR0_RAS 171
-#define _DDR0_WE_B 172
-#define _DDR0_CKE0 173
-#define _DDR0_CKE1 174
-#define _DDR0_CS_B0 175
-#define _DDR0_CS_B1 176
-#define _DDR0_BA0 177
-#define _DDR0_BA1 178
-#define _DDR0_BA2 179
-#define _DDR0_A0 180
-#define _DDR0_A1 181
-#define _DDR0_A2 182
-#define _DDR0_A3 183
-#define _DDR0_A4 184
-#define _DDR0_A5 185
-#define _DDR0_A6 186
-#define _DDR0_A7 187
-#define _DDR0_A8 188
-#define _DDR0_A9 189
-#define _DDR0_A10 190
-#define _DDR0_A11 191
-#define _DDR0_A12 192
-#define _DDR0_A13 193
-#define _DDR0_A14 194
-#define _DDR0_A15 195
-#define _DDR0_DM0 196
-#define _DDR0_DM1 197
-#define _DDR0_DM2 198
-#define _DDR0_DM3 199
-#define _DDR0_DQS0 200
-#define _DDR0_DQS1 201
-#define _DDR0_DQS2 202
-#define _DDR0_DQS3 203
-#define _DDR0_D0 204
-#define _DDR0_D1 205
-#define _DDR0_D2 206
-#define _DDR0_D3 207
-#define _DDR0_D4 208
-#define _DDR0_D5 209
-#define _DDR0_D6 210
-#define _DDR0_D7 211
-#define _DDR0_D8 212
-#define _DDR0_D9 213
-#define _DDR0_D10 214
-#define _DDR0_D11 215
-#define _DDR0_D12 216
-#define _DDR0_D13 217
-#define _DDR0_D14 218
-#define _DDR0_D15 219
-#define _DDR0_D16 220
-#define _DDR0_D17 221
-#define _DDR0_D18 222
-#define _DDR0_D19 223
-#define _DDR0_D20 224
-#define _DDR0_D21 225
-#define _DDR0_D22 226
-#define _DDR0_D23 227
-#define _DDR0_D24 228
-#define _DDR0_D25 229
-#define _DDR0_D26 230
-#define _DDR0_D27 231
-#define _DDR0_D28 232
-#define _DDR0_D29 233
-#define _DDR0_D30 234
-#define _DDR0_D31 235
-#define _DDR0_ODT0 236
-#define _DDR0_ODT1 237
-#define _DDR0_ZQ 238
-#define _DDR1_RESET 239
-#define _DDR1_CLK0 240
-#define _DDR1_CAS 241
-#define _DDR1_RAS 242
-#define _DDR1_WE_B 243
-#define _DDR1_CKE0 244
-#define _DDR1_CKE1 245
-#define _DDR1_CS_B0 246
-#define _DDR1_CS_B1 247
-#define _DDR1_BA0 248
-#define _DDR1_BA1 249
-#define _DDR1_BA2 250
-#define _DDR1_A0 251
-#define _DDR1_A1 252
-#define _DDR1_A2 253
-#define _DDR1_A3 254
-#define _DDR1_A4 255
-#define _DDR1_A5 256
-#define _DDR1_A6 257
-#define _DDR1_A7 258
-#define _DDR1_A8 259
-#define _DDR1_A9 260
-#define _DDR1_A10 261
-#define _DDR1_A11 262
-#define _DDR1_A12 263
-#define _DDR1_A13 264
-#define _DDR1_A14 265
-#define _DDR1_A15 266
-#define _DDR1_DM0 267
-#define _DDR1_DM1 268
-#define _DDR1_DM2 269
-#define _DDR1_DM3 270
-#define _DDR1_DQS0 271
-#define _DDR1_DQS1 272
-#define _DDR1_DQS2 273
-#define _DDR1_DQS3 274
-#define _DDR1_D0 275
-#define _DDR1_D1 276
-#define _DDR1_D2 277
-#define _DDR1_D3 278
-#define _DDR1_D4 279
-#define _DDR1_D5 280
-#define _DDR1_D6 281
-#define _DDR1_D7 282
-#define _DDR1_D8 283
-#define _DDR1_D9 284
-#define _DDR1_D10 285
-#define _DDR1_D11 286
-#define _DDR1_D12 287
-#define _DDR1_D13 288
-#define _DDR1_D14 289
-#define _DDR1_D15 290
-#define _DDR1_D16 291
-#define _DDR1_D17 292
-#define _DDR1_D18 293
-#define _DDR1_D19 294
-#define _DDR1_D20 295
-#define _DDR1_D21 296
-#define _DDR1_D22 297
-#define _DDR1_D23 298
-#define _DDR1_D24 299
-#define _DDR1_D25 300
-#define _DDR1_D26 301
-#define _DDR1_D27 302
-#define _DDR1_D28 303
-#define _DDR1_D29 304
-#define _DDR1_D30 305
-#define _DDR1_D31 306
-#define _DDR1_ODT0 307
-#define _DDR1_ODT1 308
-#define _DDR1_ZQ 309
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013-2016, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ASM_ARCH_IMX_REGS_H__
-#define __ASM_ARCH_IMX_REGS_H__
-
-#define ARCH_MXC
-
-#define IRAM_BASE_ADDR 0x3E800000 /* internal ram */
-#define IRAM_SIZE 0x00400000 /* 4MB */
-
-#define AIPS0_BASE_ADDR (0x40000000UL)
-#define AIPS1_BASE_ADDR (0x40080000UL)
-
-/* AIPS 0 */
-#define AXBS_BASE_ADDR (AIPS0_BASE_ADDR + 0x00000000)
-#define CSE3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001000)
-#define EDMA_BASE_ADDR (AIPS0_BASE_ADDR + 0x00002000)
-#define XRDC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00004000)
-#define SWT0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000A000)
-#define SWT1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000B000)
-#define STM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000D000)
-#define NIC301_BASE_ADDR (AIPS0_BASE_ADDR + 0x00010000)
-#define GC3000_BASE_ADDR (AIPS0_BASE_ADDR + 0x00020000)
-#define DEC200_DECODER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00026000)
-#define DEC200_ENCODER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00027000)
-#define TWOD_ACE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00028000)
-#define MIPI_CSI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00030000)
-#define DMAMUX0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00031000)
-#define ENET_BASE_ADDR (AIPS0_BASE_ADDR + 0x00032000)
-#define FLEXRAY_BASE_ADDR (AIPS0_BASE_ADDR + 0x00034000)
-#define MMDC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00036000)
-#define MEW0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00037000)
-#define MONITOR_DDR0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00038000)
-#define MONITOR_CCI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00039000)
-#define PIT0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003A000)
-#define MC_CGM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003C000)
-#define MC_CGM1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003F000)
-#define MC_CGM2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00042000)
-#define MC_CGM3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00045000)
-#define MC_RGM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00048000)
-#define MC_ME_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004A000)
-#define MC_PCU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004B000)
-#define ADC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004D000)
-#define FLEXTIMER_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004F000)
-#define I2C0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00051000)
-#define LINFLEXD0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00053000)
-#define FLEXCAN0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00055000)
-#define SPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00057000)
-#define SPI2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00059000)
-#define CRC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005B000)
-#define USDHC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005D000)
-#define OCOTP_CONTROLLER_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005F000)
-#define WKPU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000)
-#define VIU0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00064000)
-#define HPSMI_SRAM_CONTROLLER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00068000)
-#define SIUL2_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000)
-#define SIPI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00074000)
-#define LFAST_BASE_ADDR (AIPS0_BASE_ADDR + 0x00078000)
-#define SSE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00079000)
-#define SRC_SOC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0007C000)
-
-/* AIPS 1 */
-#define ERM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000000000)
-#define MSCM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000001000)
-#define SEMA42_BASE_ADDR (AIPS1_BASE_ADDR + 0X000002000)
-#define INTC_MON_BASE_ADDR (AIPS1_BASE_ADDR + 0X000003000)
-#define SWT2_BASE_ADDR (AIPS1_BASE_ADDR + 0X000004000)
-#define SWT3_BASE_ADDR (AIPS1_BASE_ADDR + 0X000005000)
-#define SWT4_BASE_ADDR (AIPS1_BASE_ADDR + 0X000006000)
-#define STM1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000007000)
-#define EIM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000008000)
-#define APB_BASE_ADDR (AIPS1_BASE_ADDR + 0X000009000)
-#define XBIC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000012000)
-#define MIPI_BASE_ADDR (AIPS1_BASE_ADDR + 0X000020000)
-#define DMAMUX1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000021000)
-#define MMDC1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000022000)
-#define MEW1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000023000)
-#define DDR1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000024000)
-#define CCI1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000025000)
-#define QUADSPI0_BASE_ADDR (AIPS1_BASE_ADDR + 0X000026000)
-#define PIT1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00002A000)
-#define FCCU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000030000)
-#define FLEXTIMER_FTM1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000036000)
-#define I2C1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000038000)
-#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003A000)
-#define LINFLEXD1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003C000)
-#define FLEXCAN1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003E000)
-#define SPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000040000)
-#define SPI3_BASE_ADDR (AIPS1_BASE_ADDR + 0X000042000)
-#define IPL_BASE_ADDR (AIPS1_BASE_ADDR + 0X000043000)
-#define CGM_CMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000044000)
-#define PMC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000048000)
-#define CRC1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00004C000)
-#define TMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X00004E000)
-#define VIU1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000050000)
-#define JPEG_BASE_ADDR (AIPS1_BASE_ADDR + 0X000054000)
-#define H264_DEC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000058000)
-#define H264_ENC_BASE_ADDR (AIPS1_BASE_ADDR + 0X00005C000)
-#define MEMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000060000)
-#define STCU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000064000)
-#define SLFTST_CTRL_BASE_ADDR (AIPS1_BASE_ADDR + 0X000066000)
-#define MCT_BASE_ADDR (AIPS1_BASE_ADDR + 0X000068000)
-#define REP_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006A000)
-#define MBIST_CONTROLLER_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006C000)
-#define BOOT_LOADER_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006F000)
-
-/* TODO Remove this after the IOMUX framework is implemented */
-#define IOMUXC_BASE_ADDR SIUL2_BASE_ADDR
-
-/* MUX mode and PAD ctrl are in one register */
-#define CONFIG_IOMUX_SHARE_CONF_REG
-
-#define FEC_QUIRK_ENET_MAC
-#define I2C_QUIRK_REG
-
-/* MSCM interrupt router */
-#define MSCM_IRSPRC_CPn_EN 3
-#define MSCM_IRSPRC_NUM 176
-#define MSCM_CPXTYPE_RYPZ_MASK 0xFF
-#define MSCM_CPXTYPE_RYPZ_OFFSET 0
-#define MSCM_CPXTYPE_PERS_MASK 0xFFFFFF00
-#define MSCM_CPXTYPE_PERS_OFFSET 8
-#define MSCM_CPXTYPE_PERS_A53 0x413533
-#define MSCM_CPXTYPE_PERS_CM4 0x434d34
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-
-/* System Reset Controller (SRC) */
-struct src {
- u32 bmr1;
- u32 bmr2;
- u32 gpr1_boot;
- u32 reserved_0x00C[61];
- u32 gpr1;
- u32 gpr2;
- u32 gpr3;
- u32 gpr4;
- u32 gpr5;
- u32 gpr6;
- u32 gpr7;
- u32 reserved_0x11C[1];
- u32 gpr9;
- u32 gpr10;
- u32 gpr11;
- u32 gpr12;
- u32 gpr13;
- u32 gpr14;
- u32 gpr15;
- u32 gpr16;
- u32 reserved_0x140[1];
- u32 gpr17;
- u32 gpr18;
- u32 gpr19;
- u32 gpr20;
- u32 gpr21;
- u32 gpr22;
- u32 gpr23;
- u32 gpr24;
- u32 gpr25;
- u32 gpr26;
- u32 gpr27;
- u32 reserved_0x16C[5];
- u32 pcie_config1;
- u32 ddr_self_ref_ctrl;
- u32 pcie_config0;
- u32 reserved_0x18C[4];
- u32 soc_misc_config2;
-};
-
-/* SRC registers definitions */
-
-/* SRC_GPR1 */
-#define SRC_GPR1_PLL_SOURCE(pll,val)( ((val) & SRC_GPR1_PLL_SOURCE_MASK) << \
- (SRC_GPR1_PLL_OFFSET + (pll)) )
-#define SRC_GPR1_PLL_SOURCE_MASK (0x1)
-
-#define SRC_GPR1_PLL_OFFSET (27)
-#define SRC_GPR1_FIRC_CLK_SOURCE (0x0)
-#define SRC_GPR1_XOSC_CLK_SOURCE (0x1)
-
-/* Periodic Interrupt Timer (PIT) */
-struct pit_reg {
- u32 mcr;
- u32 recv0[55];
- u32 ltmr64h;
- u32 ltmr64l;
- u32 recv1[6];
- u32 ldval0;
- u32 cval0;
- u32 tctrl0;
- u32 tflg0;
- u32 ldval1;
- u32 cval1;
- u32 tctrl1;
- u32 tflg1;
- u32 ldval2;
- u32 cval2;
- u32 tctrl2;
- u32 tflg2;
- u32 ldval3;
- u32 cval3;
- u32 tctrl3;
- u32 tflg3;
- u32 ldval4;
- u32 cval4;
- u32 tctrl4;
- u32 tflg4;
- u32 ldval5;
- u32 cval5;
- u32 tctrl5;
- u32 tflg5;
-};
-
-/* Watchdog Timer (WDOG) */
-struct wdog_regs {
- u32 cr;
- u32 ir;
- u32 to;
- u32 wn;
- u32 sr;
- u32 co;
- u32 sk;
-};
-
-/* UART */
-struct linflex_fsl {
- u32 lincr1;
- u32 linier;
- u32 linsr;
- u32 linesr;
- u32 uartcr;
- u32 uartsr;
- u32 lintcsr;
- u32 linocr;
- u32 lintocr;
- u32 linfbrr;
- u32 linibrr;
- u32 lincfr;
- u32 lincr2;
- u32 bidr;
- u32 bdrl;
- u32 bdrm;
- u32 ifer;
- u32 ifmi;
- u32 ifmr;
- u32 ifcr0;
- u32 ifcr1;
- u32 ifcr2;
- u32 ifcr3;
- u32 ifcr4;
- u32 ifcr5;
- u32 ifcr6;
- u32 ifcr7;
- u32 ifcr8;
- u32 ifcr9;
- u32 ifcr10;
- u32 ifcr11;
- u32 ifcr12;
- u32 ifcr13;
- u32 ifcr14;
- u32 ifcr15;
- u32 gcr;
- u32 uartpto;
- u32 uartcto;
- u32 dmatxe;
- u32 dmarxe;
-};
-
-/* MSCM Interrupt Router */
-struct mscm_ir {
- u32 cpxtype; /* Processor x Type Register */
- u32 cpxnum; /* Processor x Number Register */
- u32 cpxmaster; /* Processor x Master Number Register */
- u32 cpxcount; /* Processor x Count Register */
- u32 cpxcfg0; /* Processor x Configuration 0 Register */
- u32 cpxcfg1; /* Processor x Configuration 1 Register */
- u32 cpxcfg2; /* Processor x Configuration 2 Register */
- u32 cpxcfg3; /* Processor x Configuration 3 Register */
- u32 cp0type; /* Processor 0 Type Register */
- u32 cp0num; /* Processor 0 Number Register */
- u32 cp0master; /* Processor 0 Master Number Register */
- u32 cp0count; /* Processor 0 Count Register */
- u32 cp0cfg0; /* Processor 0 Configuration 0 Register */
- u32 cp0cfg1; /* Processor 0 Configuration 1 Register */
- u32 cp0cfg2; /* Processor 0 Configuration 2 Register */
- u32 cp0cfg3; /* Processor 0 Configuration 3 Register */
- u32 cp1type; /* Processor 1 Type Register */
- u32 cp1num; /* Processor 1 Number Register */
- u32 cp1master; /* Processor 1 Master Number Register */
- u32 cp1count; /* Processor 1 Count Register */
- u32 cp1cfg0; /* Processor 1 Configuration 0 Register */
- u32 cp1cfg1; /* Processor 1 Configuration 1 Register */
- u32 cp1cfg2; /* Processor 1 Configuration 2 Register */
- u32 cp1cfg3; /* Processor 1 Configuration 3 Register */
- u32 reserved_0x060[232];
- u32 ocmdr0; /* On-Chip Memory Descriptor Register */
- u32 reserved_0x404[2];
- u32 ocmdr3; /* On-Chip Memory Descriptor Register */
- u32 reserved_0x410[28];
- u32 tcmdr[4]; /* Generic Tightly Coupled Memory Descriptor Register */
- u32 reserved_0x490[28];
- u32 cpce0; /* Core Parity Checking Enable Register 0 */
- u32 reserved_0x504[191];
- u32 ircp0ir; /* Interrupt Router CP0 Interrupt Register */
- u32 ircp1ir; /* Interrupt Router CP1 Interrupt Register */
- u32 reserved_0x808[6];
- u32 ircpgir; /* Interrupt Router CPU Generate Interrupt Register */
- u32 reserved_0x824[23];
- u16 irsprc[176]; /* Interrupt Router Shared Peripheral Routing Control Register */
- u32 reserved_0x9e0[136];
- u32 iahbbe0; /* Gasket Burst Enable Register */
- u32 reserved_0xc04[63];
- u32 ipcge; /* Interconnect Parity Checking Global Enable Register */
- u32 reserved_0xd04[3];
- u32 ipce[4]; /* Interconnect Parity Checking Enable Register */
- u32 reserved_0xd20[8];
- u32 ipcgie; /* Interconnect Parity Checking Global Injection Enable Register */
- u32 reserved_0xd44[3];
- u32 ipcie[4]; /* Interconnect Parity Checking Injection Enable Register */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_IMX_REGS_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015-2016, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_LPDDR2_H__
-#define __ARCH_ARM_MACH_S32V234_LPDDR2_H__
-
-/* definitions for LPDDR2 PAD values */
-#define LPDDR2_CLK0_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\
- SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_CRPOINT_TRIM_1 | \
- SIUL2_MSCR_DCYCLE_TRIM_NONE)
-#define LPDDR2_CKEn_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\
- SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm)
-#define LPDDR2_CS_Bn_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\
- SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm)
-#define LPDDR2_DMn_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\
- SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm)
-#define LPDDR2_DQSn_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \
- SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_PUE_EN | SIUL2_MSCR_PUS_100K_DOWN | \
- SIUL2_MSCR_PKE_EN | SIUL2_MSCR_CRPOINT_TRIM_1 | SIUL2_MSCR_DCYCLE_TRIM_NONE)
-#define LPDDR2_An_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \
- SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_DDR_DO_TRIM_50PS | SIUL2_MSCR_DCYCLE_TRIM_LEFT | \
- SIUL2_MSCR_PUS_100K_UP)
-#define LPDDR2_Dn_PAD \
- (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \
- SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_DDR_DO_TRIM_50PS | SIUL2_MSCR_DCYCLE_TRIM_LEFT | \
- SIUL2_MSCR_PUS_100K_UP)
-
-#define _MDCTL 0x03010000
-
-#define MMDC_MDSCR_CFG_VALUE 0x00008000 /* Set MDSCR[CON_REQ] (configuration request) */
-#define MMDC_MDCFG0_VALUE 0x464F61A5 /* tRFCab=70 (=130ns),tXSR=80 (=tRFCab+10ns),tXP=4 (=7.5ns),tXPDLL=n/a,tFAW=27 (50 ns),tCL(RL)=8 */
-#define MMDC_MDCFG1_VALUE 0x00180E63 /* tRCD=n/a,tRPpb=n/a,tRC=n/a ,tRAS=25 (=47ns),tRPA=n/a,tWR=8 (=15.0ns),tMRD=3,tWL=4 */
-#define MMDC_MDCFG2_VALUE 0x000000DD /* tDLLK=n/a,tRTP=4 (=7.5ns),tWTR=4 (=7.5ns),tRRD=6 (=10ns) */
-#define MMDC_MDCFG3LP_VALUE 0x001F099B /* RC_LP=tRAS+tRPab=32 (>60ns), tRCD_LP=10 (18ns) , tRPpb_LP=10 (18ns), tRPab_LP=12 (21ns) */
-#define MMDC_MDOTC_VALUE 0x00000000 /* tAOFPD=n/a,tAONPD=n/a,tANPD=n/a,tAXPD=n/a,tODTLon=n/a,tODT_idle_off=n/a */
-#define MMDC_MDMISC_VALUE 0x00001688 /* WALAT=0, BI bank interleave on, LPDDR2_S2=0, MIF3=3, RALAT=2, 8 banks, LPDDR2 */
-#define MMDC_MDOR_VALUE 0x00000010 /* tXPR=n/a , SDE_to_RST=n/a, RST_to_CKE=14 */
-#define MMDC_MPMUR0_VALUE 0x00000800 /* Force delay line initialisation */
-#define MMDC_MDSCR_RST_VALUE 0x003F8030 /* Reset command CS0 */
-#define MMDC_MPZQLP2CTL_VALUE 0x1B5F0109 /* ZQ_LP2_HW_ZQCS=0x1B (90ns spec), ZQ_LP2_HW_ZQCL=0x5F (160ns spec), ZQ_LP2_HW_ZQINIT=0x109 (1us spec) */
-#define MMDC_MPZQHWCTRL_VALUE 0xA0010003 /* ZQ_EARLY_COMPARATOR_EN_TIMER=0x14, TZQ_CS=n/a, TZQ_OPER=n/a, TZQ_INIT=n/a, ZQ_HW_FOR=1, ZQ_HW_PER=0, ZQ_MODE=3 */
-#define MMDC_MDSCR_MR1_VALUE 0xC2018030 /* Configure MR1: BL 4, burst type interleaved, wrap control no wrap, tWR cycles 8 */
-#define MMDC_MDSCR_MR2_VALUE 0x06028030 /* Configure MR2: RL=8, WL=4 */
-#define MMDC_MDSCR_MR3_VALUE 0x01038030 /* Configure MR3: DS=34R */
-#define MMDC_MDSCR_MR10_VALUE 0xFF0A8030 /* Configure MR10: Calibration at init */
-#define MMDC_MDASP_MODULE0_VALUE 0x0000007F /* 2Gb, 256 MB memory so CS0 is 256 MB (0x90000000) */
-#define MMDC_MPRDDLCTL_MODULE0_VALUE 0x4D4B4F4B /* Read delay line offsets */
-#define MMDC_MPWRDLCTL_MODULE0_VALUE 0x38383737 /* Write delay line offsets */
-#define MMDC_MPDGCTRL0_MODULE0_VALUE 0x20000000 /* Read DQS gating control 0 (disabled) */
-#define MMDC_MPDGCTRL1_MODULE0_VALUE 0x00000000 /* Read DQS gating control 1 */
-#define MMDC_MDASP_MODULE1_VALUE 0x0000007F /* 2Gb, 256 MB memory so CS0 is 256 MB (0xD0000000) */
-#define MMDC_MPRDDLCTL_MODULE1_VALUE 0x4D4B4F4B /* Read delay line offsets */
-#define MMDC_MPWRDLCTL_MODULE1_VALUE 0x38383737 /* Write delay line offsets */
-#define MMDC_MPDGCTRL0_MODULE1_VALUE 0x20000000 /* Read DQS gating control 0 (disabled) */
-#define MMDC_MPDGCTRL1_MODULE1_VALUE 0x00000000 /* Read DQS gating control 1 */
-#define MMDC_MDRWD_VALUE 0x0F9F26D2 /* Read/write command delay - default used */
-#define MMDC_MDPDC_VALUE 0x00020024 /* Power down control */
-#define MMDC_MDREF_VALUE 0x30B01800 /* Refresh control */
-#define MMDC_MPODTCTRL_VALUE 0x00000000 /* No ODT */
-#define MMDC_MDSCR_DEASSERT_VALUE 0x00000000 /* Deassert the configuration request */
-
-/* set I/O pads for DDR */
-void lpddr2_config_iomux(uint8_t module);
-void config_mmdc(uint8_t module);
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__
-#define __ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__
-
-#ifndef __ASSEMBLY__
-
-/* MC_CGM registers definitions */
-/* MC_CGM_SC_SS */
-#define CGM_SC_SS(cgm_addr) ( ((cgm_addr) + 0x000007E4) )
-#define MC_CGM_SC_SEL_FIRC (0x0)
-#define MC_CGM_SC_SEL_XOSC (0x1)
-#define MC_CGM_SC_SEL_ARMPLL (0x2)
-#define MC_CGM_SC_SEL_CLKDISABLE (0xF)
-
-/* MC_CGM_SC_DCn */
-#define CGM_SC_DCn(cgm_addr,dc) ( ((cgm_addr) + 0x000007E8) + ((dc) * 0x4) )
-#define MC_CGM_SC_DCn_PREDIV(val) (MC_CGM_SC_DCn_PREDIV_MASK & ((val) << MC_CGM_SC_DCn_PREDIV_OFFSET))
-#define MC_CGM_SC_DCn_PREDIV_MASK (0x00070000)
-#define MC_CGM_SC_DCn_PREDIV_OFFSET (16)
-#define MC_CGM_SC_DCn_DE (1 << 31)
-#define MC_CGM_SC_SEL_MASK (0x0F000000)
-#define MC_CGM_SC_SEL_OFFSET (24)
-
-/* MC_CGM_ACn_DCm */
-#define CGM_ACn_DCm(cgm_addr,ac,dc) ( ((cgm_addr) + 0x00000808) + ((ac) * 0x20) + ((dc) * 0x4) )
-#define MC_CGM_ACn_DCm_PREDIV(val) (MC_CGM_ACn_DCm_PREDIV_MASK & ((val) << MC_CGM_ACn_DCm_PREDIV_OFFSET))
-
-/*
- * MC_CGM_ACn_DCm_PREDIV_MASK is on 5 bits because practical test has shown
- * that the 5th bit is always ignored during writes if the current
- * MC_CGM_ACn_DCm_PREDIV field has only 4 bits
- *
- * The manual states only selectors 1, 5 and 15 have DC0_PREDIV on 5 bits
- *
- * This should be changed if any problems occur.
- */
-#define MC_CGM_ACn_DCm_PREDIV_MASK (0x001F0000)
-#define MC_CGM_ACn_DCm_PREDIV_OFFSET (16)
-#define MC_CGM_ACn_DCm_DE (1 << 31)
-
-/*
- * MC_CGM_ACn_SC/MC_CGM_ACn_SS
- */
-#define CGM_ACn_SC(cgm_addr,ac) ((cgm_addr + 0x00000800) + ((ac) * 0x20))
-#define CGM_ACn_SS(cgm_addr,ac) ((cgm_addr + 0x00000804) + ((ac) * 0x20))
-#define MC_CGM_ACn_SEL_MASK (0x07000000)
-#define MC_CGM_ACn_SEL_SET(source) (MC_CGM_ACn_SEL_MASK & (((source) & 0x7) << MC_CGM_ACn_SEL_OFFSET))
-#define MC_CGM_ACn_SEL_OFFSET (24)
-
-#define MC_CGM_ACn_SEL_FIRC (0x0)
-#define MC_CGM_ACn_SEL_XOSC (0x1)
-#define MC_CGM_ACn_SEL_ARMPLL (0x2)
-/*
- * According to the manual some PLL can be divided by X (X={1,3,5}):
- * PERPLLDIVX, VIDEOPLLDIVX.
- */
-#define MC_CGM_ACn_SEL_PERPLLDIVX (0x3)
-#define MC_CGM_ACn_SEL_ENETPLL (0x4)
-#define MC_CGM_ACn_SEL_DDRPLL (0x5)
-#define MC_CGM_ACn_SEL_EXTSRCPAD (0x7)
-#define MC_CGM_ACn_SEL_SYSCLK (0x8)
-#define MC_CGM_ACn_SEL_VIDEOPLLDIVX (0x9)
-#define MC_CGM_ACn_SEL_PERCLK (0xA)
-
-/* PLLDIG PLL Divider Register (PLLDIG_PLLDV) */
-#define PLLDIG_PLLDV(pll) ((MC_CGM0_BASE_ADDR + 0x00000028) + ((pll) * 0x80))
-#define PLLDIG_PLLDV_MFD(div) (PLLDIG_PLLDV_MFD_MASK & (div))
-#define PLLDIG_PLLDV_MFD_MASK (0x000000FF)
-
-/*
- * PLLDIG_PLLDV_RFDPHIB has a different format for /32 according to
- * the reference manual. This other value respect the formula 2^[RFDPHIBY+1]
- */
-#define PLLDIG_PLLDV_RFDPHI_SET(val) (PLLDIG_PLLDV_RFDPHI_MASK & (((val) & PLLDIG_PLLDV_RFDPHI_MAXVALUE) << PLLDIG_PLLDV_RFDPHI_OFFSET))
-#define PLLDIG_PLLDV_RFDPHI_MASK (0x003F0000)
-#define PLLDIG_PLLDV_RFDPHI_MAXVALUE (0x3F)
-#define PLLDIG_PLLDV_RFDPHI_OFFSET (16)
-
-#define PLLDIG_PLLDV_RFDPHI1_SET(val) (PLLDIG_PLLDV_RFDPHI1_MASK & (((val) & PLLDIG_PLLDV_RFDPHI1_MAXVALUE) << PLLDIG_PLLDV_RFDPHI1_OFFSET))
-#define PLLDIG_PLLDV_RFDPHI1_MASK (0x7E000000)
-#define PLLDIG_PLLDV_RFDPHI1_MAXVALUE (0x3F)
-#define PLLDIG_PLLDV_RFDPHI1_OFFSET (25)
-
-#define PLLDIG_PLLDV_PREDIV_SET(val) (PLLDIG_PLLDV_PREDIV_MASK & (((val) & PLLDIG_PLLDV_PREDIV_MAXVALUE) << PLLDIG_PLLDV_PREDIV_OFFSET))
-#define PLLDIG_PLLDV_PREDIV_MASK (0x00007000)
-#define PLLDIG_PLLDV_PREDIV_MAXVALUE (0x7)
-#define PLLDIG_PLLDV_PREDIV_OFFSET (12)
-
-/* PLLDIG PLL Fractional Divide Register (PLLDIG_PLLFD) */
-#define PLLDIG_PLLFD(pll) ((MC_CGM0_BASE_ADDR + 0x00000030) + ((pll) * 0x80))
-#define PLLDIG_PLLFD_MFN_SET(val) (PLLDIG_PLLFD_MFN_MASK & (val))
-#define PLLDIG_PLLFD_MFN_MASK (0x00007FFF)
-#define PLLDIG_PLLFD_SMDEN (1 << 30)
-
-/* PLL Calibration Register 1 (PLLDIG_PLLCAL1) */
-#define PLLDIG_PLLCAL1(pll) ((MC_CGM0_BASE_ADDR + 0x00000038) + ((pll) * 0x80))
-#define PLLDIG_PLLCAL1_NDAC1_SET(val) (PLLDIG_PLLCAL1_NDAC1_MASK & ((val) << PLLDIG_PLLCAL1_NDAC1_OFFSET))
-#define PLLDIG_PLLCAL1_NDAC1_OFFSET (24)
-#define PLLDIG_PLLCAL1_NDAC1_MASK (0x7F000000)
-
-/* Digital Frequency Synthesizer (DFS) */
-/* According to the manual there are 3 DFS modules only for ARM_PLL, DDR_PLL, ENET_PLL */
-#define DFS0_BASE_ADDR (MC_CGM0_BASE_ADDR + 0x00000040)
-
-/* DFS DLL Program Register 1 */
-#define DFS_DLLPRG1(pll) (DFS0_BASE_ADDR + 0x00000000 + ((pll) * 0x80))
-
-#define DFS_DLLPRG1_V2IGC_SET(val) (DFS_DLLPRG1_V2IGC_MASK & ((val) << DFS_DLLPRG1_V2IGC_OFFSET))
-#define DFS_DLLPRG1_V2IGC_OFFSET (0)
-#define DFS_DLLPRG1_V2IGC_MASK (0x00000007)
-
-#define DFS_DLLPRG1_LCKWT_SET(val) (DFS_DLLPRG1_LCKWT_MASK & ((val) << DFS_DLLPRG1_LCKWT_OFFSET))
-#define DFS_DLLPRG1_LCKWT_OFFSET (4)
-#define DFS_DLLPRG1_LCKWT_MASK (0x00000030)
-
-#define DFS_DLLPRG1_DACIN_SET(val) (DFS_DLLPRG1_DACIN_MASK & ((val) << DFS_DLLPRG1_DACIN_OFFSET))
-#define DFS_DLLPRG1_DACIN_OFFSET (6)
-#define DFS_DLLPRG1_DACIN_MASK (0x000001C0)
-
-#define DFS_DLLPRG1_CALBYPEN_SET(val) (DFS_DLLPRG1_CALBYPEN_MASK & ((val) << DFS_DLLPRG1_CALBYPEN_OFFSET))
-#define DFS_DLLPRG1_CALBYPEN_OFFSET (9)
-#define DFS_DLLPRG1_CALBYPEN_MASK (0x00000200)
-
-#define DFS_DLLPRG1_VSETTLCTRL_SET(val) (DFS_DLLPRG1_VSETTLCTRL_MASK & ((val) << DFS_DLLPRG1_VSETTLCTRL_OFFSET))
-#define DFS_DLLPRG1_VSETTLCTRL_OFFSET (10)
-#define DFS_DLLPRG1_VSETTLCTRL_MASK (0x00000C00)
-
-#define DFS_DLLPRG1_CPICTRL_SET(val) (DFS_DLLPRG1_CPICTRL_MASK & ((val) << DFS_DLLPRG1_CPICTRL_OFFSET))
-#define DFS_DLLPRG1_CPICTRL_OFFSET (12)
-#define DFS_DLLPRG1_CPICTRL_MASK (0x00007000)
-
-/* DFS Control Register (DFS_CTRL) */
-#define DFS_CTRL(pll) (DFS0_BASE_ADDR + 0x00000018 + ((pll) * 0x80))
-#define DFS_CTRL_DLL_LOLIE (1 << 0)
-#define DFS_CTRL_DLL_RESET (1 << 1)
-
-/* DFS Port Status Register (DFS_PORTSR) */
-#define DFS_PORTSR(pll) (DFS0_BASE_ADDR + 0x0000000C +((pll) * 0x80))
-/* DFS Port Reset Register (DFS_PORTRESET) */
-#define DFS_PORTRESET(pll) (DFS0_BASE_ADDR + 0x00000014 + ((pll) * 0x80))
-#define DFS_PORTRESET_PORTRESET_SET(val) (DFS_PORTRESET_PORTRESET_MASK | (((val) & DFS_PORTRESET_PORTRESET_MAXVAL) << DFS_PORTRESET_PORTRESET_OFFSET))
-#define DFS_PORTRESET_PORTRESET_MAXVAL (0xF)
-#define DFS_PORTRESET_PORTRESET_MASK (0x0000000F)
-#define DFS_PORTRESET_PORTRESET_OFFSET (0)
-
-/* DFS Divide Register Portn (DFS_DVPORTn) */
-#define DFS_DVPORTn(pll,n) (DFS0_BASE_ADDR + ((pll) * 0x80) + (0x0000001C + ((n) * 0x4)))
-
-/*
- * The mathematical formula for fdfs_clockout is the following:
- * fdfs_clckout = fdfs_clkin / ( DFS_DVPORTn[MFI] + (DFS_DVPORTn[MFN]/256) )
- */
-#define DFS_DVPORTn_MFI_SET(val) (DFS_DVPORTn_MFI_MASK & (((val) & DFS_DVPORTn_MFI_MAXVAL) << DFS_DVPORTn_MFI_OFFSET) )
-#define DFS_DVPORTn_MFN_SET(val) (DFS_DVPORTn_MFN_MASK & (((val) & DFS_DVPORTn_MFN_MAXVAL) << DFS_DVPORTn_MFN_OFFSET) )
-#define DFS_DVPORTn_MFI_MASK (0x0000FF00)
-#define DFS_DVPORTn_MFN_MASK (0x000000FF)
-#define DFS_DVPORTn_MFI_MAXVAL (0xFF)
-#define DFS_DVPORTn_MFN_MAXVAL (0xFF)
-#define DFS_DVPORTn_MFI_OFFSET (8)
-#define DFS_DVPORTn_MFN_OFFSET (0)
-#define DFS_MAXNUMBER (4)
-
-#define DFS_PARAMS_Nr (3)
-
-/* Frequencies are in Hz */
-#define FIRC_CLK_FREQ (48000000)
-#define XOSC_CLK_FREQ (40000000)
-
-#define PLL_MIN_FREQ (650000000)
-#define PLL_MAX_FREQ (1300000000)
-
-#define ARM_PLL_PHI0_FREQ (1000000000)
-#define ARM_PLL_PHI1_FREQ (1000000000)
-/* ARM_PLL_PHI1_DFS1_FREQ - 266 Mhz */
-#define ARM_PLL_PHI1_DFS1_EN (1)
-#define ARM_PLL_PHI1_DFS1_MFI (3)
-#define ARM_PLL_PHI1_DFS1_MFN (194)
-/* ARM_PLL_PHI1_DFS2_REQ - 600 Mhz */
-#define ARM_PLL_PHI1_DFS2_EN (1)
-#define ARM_PLL_PHI1_DFS2_MFI (1)
-#define ARM_PLL_PHI1_DFS2_MFN (170)
-/* ARM_PLL_PHI1_DFS3_FREQ - 600 Mhz */
-#define ARM_PLL_PHI1_DFS3_EN (1)
-#define ARM_PLL_PHI1_DFS3_MFI (1)
-#define ARM_PLL_PHI1_DFS3_MFN (170)
-#define ARM_PLL_PHI1_DFS_Nr (3)
-#define ARM_PLL_PLLDV_PREDIV (2)
-#define ARM_PLL_PLLDV_MFD (50)
-#define ARM_PLL_PLLDV_MFN (0)
-
-#define PERIPH_PLL_PHI0_FREQ (400000000)
-#define PERIPH_PLL_PHI1_FREQ (100000000)
-#define PERIPH_PLL_PHI1_DFS_Nr (0)
-#define PERIPH_PLL_PLLDV_PREDIV (1)
-#define PERIPH_PLL_PLLDV_MFD (30)
-#define PERIPH_PLL_PLLDV_MFN (0)
-
-#define ENET_PLL_PHI0_FREQ (500000000)
-#define ENET_PLL_PHI1_FREQ (1000000000)
-/* ENET_PLL_PHI1_DFS1_FREQ - 350 Mhz*/
-#define ENET_PLL_PHI1_DFS1_EN (1)
-#define ENET_PLL_PHI1_DFS1_MFI (2)
-#define ENET_PLL_PHI1_DFS1_MFN (219)
-/* ENET_PLL_PHI1_DFS2_FREQ - 350 Mhz*/
-#define ENET_PLL_PHI1_DFS2_EN (1)
-#define ENET_PLL_PHI1_DFS2_MFI (2)
-#define ENET_PLL_PHI1_DFS2_MFN (219)
-/* ENET_PLL_PHI1_DFS3_FREQ - 320 Mhz*/
-#define ENET_PLL_PHI1_DFS3_EN (1)
-#define ENET_PLL_PHI1_DFS3_MFI (3)
-#define ENET_PLL_PHI1_DFS3_MFN (32)
-/* ENET_PLL_PHI1_DFS1_FREQ - 50 Mhz*/
-#define ENET_PLL_PHI1_DFS4_EN (1)
-#define ENET_PLL_PHI1_DFS4_MFI (2)
-#define ENET_PLL_PHI1_DFS4_MFN (0)
-#define ENET_PLL_PHI1_DFS_Nr (4)
-#define ENET_PLL_PLLDV_PREDIV (2)
-#define ENET_PLL_PLLDV_MFD (50)
-#define ENET_PLL_PLLDV_MFN (0)
-
-#define DDR_PLL_PHI0_FREQ (533000000)
-#define DDR_PLL_PHI1_FREQ (1066000000)
-/* DDR_PLL_PHI1_DFS1_FREQ - 500 Mhz */
-#define DDR_PLL_PHI1_DFS1_EN (1)
-#define DDR_PLL_PHI1_DFS1_MFI (2)
-#define DDR_PLL_PHI1_DFS1_MFN (33)
-/* DDR_PLL_PHI1_DFS2_REQ - 500 Mhz */
-#define DDR_PLL_PHI1_DFS2_EN (1)
-#define DDR_PLL_PHI1_DFS2_MFI (2)
-#define DDR_PLL_PHI1_DFS2_MFN (33)
-/* DDR_PLL_PHI1_DFS3_FREQ - 350 Mhz */
-#define DDR_PLL_PHI1_DFS3_EN (1)
-#define DDR_PLL_PHI1_DFS3_MFI (3)
-#define DDR_PLL_PHI1_DFS3_MFN (11)
-#define DDR_PLL_PHI1_DFS_Nr (3)
-#define DDR_PLL_PLLDV_PREDIV (2)
-#define DDR_PLL_PLLDV_MFD (53)
-#define DDR_PLL_PLLDV_MFN (6144)
-
-#define VIDEO_PLL_PHI0_FREQ (600000000)
-#define VIDEO_PLL_PHI1_FREQ (0)
-#define VIDEO_PLL_PHI1_DFS_Nr (0)
-#define VIDEO_PLL_PLLDV_PREDIV (1)
-#define VIDEO_PLL_PLLDV_MFD (30)
-#define VIDEO_PLL_PLLDV_MFN (0)
-
-#endif
-
-#endif /*__ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_MCME_REGS_H__
-#define __ARCH_ARM_MACH_S32V234_MCME_REGS_H__
-
-#ifndef __ASSEMBLY__
-
-/* MC_ME registers definitions */
-
-/* MC_ME_GS */
-#define MC_ME_GS (MC_ME_BASE_ADDR + 0x00000000)
-
-#define MC_ME_GS_S_SYSCLK_FIRC (0x0 << 0)
-#define MC_ME_GS_S_SYSCLK_FXOSC (0x1 << 0)
-#define MC_ME_GS_S_SYSCLK_ARMPLL (0x2 << 0)
-#define MC_ME_GS_S_STSCLK_DISABLE (0xF << 0)
-#define MC_ME_GS_S_FIRC (1 << 4)
-#define MC_ME_GS_S_XOSC (1 << 5)
-#define MC_ME_GS_S_ARMPLL (1 << 6)
-#define MC_ME_GS_S_PERPLL (1 << 7)
-#define MC_ME_GS_S_ENETPLL (1 << 8)
-#define MC_ME_GS_S_DDRPLL (1 << 9)
-#define MC_ME_GS_S_VIDEOPLL (1 << 10)
-#define MC_ME_GS_S_MVR (1 << 20)
-#define MC_ME_GS_S_PDO (1 << 23)
-#define MC_ME_GS_S_MTRANS (1 << 27)
-#define MC_ME_GS_S_CRT_MODE_RESET (0x0 << 28)
-#define MC_ME_GS_S_CRT_MODE_TEST (0x1 << 28)
-#define MC_ME_GS_S_CRT_MODE_DRUN (0x3 << 28)
-#define MC_ME_GS_S_CRT_MODE_RUN0 (0x4 << 28)
-#define MC_ME_GS_S_CRT_MODE_RUN1 (0x5 << 28)
-#define MC_ME_GS_S_CRT_MODE_RUN2 (0x6 << 28)
-#define MC_ME_GS_S_CRT_MODE_RUN3 (0x7 << 28)
-
-/* MC_ME_MCTL */
-#define MC_ME_MCTL (MC_ME_BASE_ADDR + 0x00000004)
-
-#define MC_ME_MCTL_KEY (0x00005AF0)
-#define MC_ME_MCTL_INVERTEDKEY (0x0000A50F)
-#define MC_ME_MCTL_RESET (0x0 << 28)
-#define MC_ME_MCTL_TEST (0x1 << 28)
-#define MC_ME_MCTL_DRUN (0x3 << 28)
-#define MC_ME_MCTL_RUN0 (0x4 << 28)
-#define MC_ME_MCTL_RUN1 (0x5 << 28)
-#define MC_ME_MCTL_RUN2 (0x6 << 28)
-#define MC_ME_MCTL_RUN3 (0x7 << 28)
-
-/* MC_ME_ME */
-#define MC_ME_ME (MC_ME_BASE_ADDR + 0x00000008)
-
-#define MC_ME_ME_RESET_FUNC (1 << 0)
-#define MC_ME_ME_TEST (1 << 1)
-#define MC_ME_ME_DRUN (1 << 3)
-#define MC_ME_ME_RUN0 (1 << 4)
-#define MC_ME_ME_RUN1 (1 << 5)
-#define MC_ME_ME_RUN2 (1 << 6)
-#define MC_ME_ME_RUN3 (1 << 7)
-
-/* MC_ME_RUN_PCn */
-#define MC_ME_RUN_PCn(n) (MC_ME_BASE_ADDR + 0x00000080 + 0x4 * (n))
-
-#define MC_ME_RUN_PCn_RESET (1 << 0)
-#define MC_ME_RUN_PCn_TEST (1 << 1)
-#define MC_ME_RUN_PCn_DRUN (1 << 3)
-#define MC_ME_RUN_PCn_RUN0 (1 << 4)
-#define MC_ME_RUN_PCn_RUN1 (1 << 5)
-#define MC_ME_RUN_PCn_RUN2 (1 << 6)
-#define MC_ME_RUN_PCn_RUN3 (1 << 7)
-
-/*
- * MC_ME_RESET_MC/MC_ME_TEST_MC
- * MC_ME_DRUN_MC
- * MC_ME_RUNn_MC
- */
-#define MC_ME_RESET_MC (MC_ME_BASE_ADDR + 0x00000020)
-#define MC_ME_TEST_MC (MC_ME_BASE_ADDR + 0x00000024)
-#define MC_ME_DRUN_MC (MC_ME_BASE_ADDR + 0x0000002C)
-#define MC_ME_RUNn_MC(n) (MC_ME_BASE_ADDR + 0x00000030 + 0x4 * (n))
-
-#define MC_ME_RUNMODE_MC_SYSCLK(val) (MC_ME_RUNMODE_MC_SYSCLK_MASK & (val))
-#define MC_ME_RUNMODE_MC_SYSCLK_MASK (0x0000000F)
-#define MC_ME_RUNMODE_MC_FIRCON (1 << 4)
-#define MC_ME_RUNMODE_MC_XOSCON (1 << 5)
-#define MC_ME_RUNMODE_MC_PLL(pll) (1 << (6 + (pll)))
-#define MC_ME_RUNMODE_MC_MVRON (1 << 20)
-#define MC_ME_RUNMODE_MC_PDO (1 << 23)
-#define MC_ME_RUNMODE_MC_PWRLVL0 (1 << 28)
-#define MC_ME_RUNMODE_MC_PWRLVL1 (1 << 29)
-#define MC_ME_RUNMODE_MC_PWRLVL2 (1 << 30)
-
-/* MC_ME_DRUN_SEC_CC_I */
-#define MC_ME_DRUN_SEC_CC_I (MC_ME_BASE_ADDR + 0x260)
-/* MC_ME_RUNn_SEC_CC_I */
-#define MC_ME_RUNn_SEC_CC_I(n) (MC_ME_BASE_ADDR + 0x270 + (n) * 0x10)
-#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK(val,offset) ((MC_ME_RUNMODE_SEC_CC_I_SYSCLK_MASK & (val)) << offset)
-#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK1_OFFSET (4)
-#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK2_OFFSET (8)
-#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK3_OFFSET (12)
-#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK_MASK (0x3)
-
-/*
- * ME_PCTLn
- * Please note that these registers are 8 bits width, so
- * the operations over them should be done using 8 bits operations.
- */
-#define MC_ME_PCTLn_RUNPCm(n) ( (n) & MC_ME_PCTLn_RUNPCm_MASK )
-#define MC_ME_PCTLn_RUNPCm_MASK (0x7)
-
-/* DEC200 Peripheral Control Register */
-#define MC_ME_PCTL39 (MC_ME_BASE_ADDR + 0x000000E4)
-/* 2D-ACE Peripheral Control Register */
-#define MC_ME_PCTL40 (MC_ME_BASE_ADDR + 0x000000EB)
-/* ENET Peripheral Control Register */
-#define MC_ME_PCTL50 (MC_ME_BASE_ADDR + 0x000000F1)
-/* DMACHMUX0 Peripheral Control Register */
-#define MC_ME_PCTL49 (MC_ME_BASE_ADDR + 0x000000F2)
-/* CSI0 Peripheral Control Register */
-#define MC_ME_PCTL48 (MC_ME_BASE_ADDR + 0x000000F3)
-/* MMDC0 Peripheral Control Register */
-#define MC_ME_PCTL54 (MC_ME_BASE_ADDR + 0x000000F5)
-/* FRAY Peripheral Control Register */
-#define MC_ME_PCTL52 (MC_ME_BASE_ADDR + 0x000000F7)
-/* PIT0 Peripheral Control Register */
-#define MC_ME_PCTL58 (MC_ME_BASE_ADDR + 0x000000F9)
-/* FlexTIMER0 Peripheral Control Register */
-#define MC_ME_PCTL79 (MC_ME_BASE_ADDR + 0x0000010C)
-/* SARADC0 Peripheral Control Register */
-#define MC_ME_PCTL77 (MC_ME_BASE_ADDR + 0x0000010E)
-/* LINFLEX0 Peripheral Control Register */
-#define MC_ME_PCTL83 (MC_ME_BASE_ADDR + 0x00000110)
-/* IIC0 Peripheral Control Register */
-#define MC_ME_PCTL81 (MC_ME_BASE_ADDR + 0x00000112)
-/* DSPI0 Peripheral Control Register */
-#define MC_ME_PCTL87 (MC_ME_BASE_ADDR + 0x00000114)
-/* CANFD0 Peripheral Control Register */
-#define MC_ME_PCTL85 (MC_ME_BASE_ADDR + 0x00000116)
-/* CRC0 Peripheral Control Register */
-#define MC_ME_PCTL91 (MC_ME_BASE_ADDR + 0x00000118)
-/* DSPI2 Peripheral Control Register */
-#define MC_ME_PCTL89 (MC_ME_BASE_ADDR + 0x0000011A)
-/* SDHC Peripheral Control Register */
-#define MC_ME_PCTL93 (MC_ME_BASE_ADDR + 0x0000011E)
-/* VIU0 Peripheral Control Register */
-#define MC_ME_PCTL100 (MC_ME_BASE_ADDR + 0x00000127)
-/* HPSMI Peripheral Control Register */
-#define MC_ME_PCTL104 (MC_ME_BASE_ADDR + 0x0000012B)
-/* SIPI Peripheral Control Register */
-#define MC_ME_PCTL116 (MC_ME_BASE_ADDR + 0x00000137)
-/* LFAST Peripheral Control Register */
-#define MC_ME_PCTL120 (MC_ME_BASE_ADDR + 0x0000013B)
-/* MMDC1 Peripheral Control Register */
-#define MC_ME_PCTL162 (MC_ME_BASE_ADDR + 0x00000161)
-/* DMACHMUX1 Peripheral Control Register */
-#define MC_ME_PCTL161 (MC_ME_BASE_ADDR + 0x00000162)
-/* CSI1 Peripheral Control Register */
-#define MC_ME_PCTL160 (MC_ME_BASE_ADDR + 0x00000163)
-/* QUADSPI0 Peripheral Control Register */
-#define MC_ME_PCTL166 (MC_ME_BASE_ADDR + 0x00000165)
-/* PIT1 Peripheral Control Register */
-#define MC_ME_PCTL170 (MC_ME_BASE_ADDR + 0x00000169)
-/* FlexTIMER1 Peripheral Control Register */
-#define MC_ME_PCTL182 (MC_ME_BASE_ADDR + 0x00000175)
-/* IIC2 Peripheral Control Register */
-#define MC_ME_PCTL186 (MC_ME_BASE_ADDR + 0x00000179)
-/* IIC1 Peripheral Control Register */
-#define MC_ME_PCTL184 (MC_ME_BASE_ADDR + 0x0000017B)
-/* CANFD1 Peripheral Control Register */
-#define MC_ME_PCTL190 (MC_ME_BASE_ADDR + 0x0000017D)
-/* LINFLEX1 Peripheral Control Register */
-#define MC_ME_PCTL188 (MC_ME_BASE_ADDR + 0x0000017F)
-/* DSPI3 Peripheral Control Register */
-#define MC_ME_PCTL194 (MC_ME_BASE_ADDR + 0x00000181)
-/* DSPI1 Peripheral Control Register */
-#define MC_ME_PCTL192 (MC_ME_BASE_ADDR + 0x00000183)
-/* TSENS Peripheral Control Register */
-#define MC_ME_PCTL206 (MC_ME_BASE_ADDR + 0x0000018D)
-/* CRC1 Peripheral Control Register */
-#define MC_ME_PCTL204 (MC_ME_BASE_ADDR + 0x0000018F)
-/* VIU1 Peripheral Control Register */
-#define MC_ME_PCTL208 (MC_ME_BASE_ADDR + 0x00000193)
-/* JPEG Peripheral Control Register */
-#define MC_ME_PCTL212 (MC_ME_BASE_ADDR + 0x00000197)
-/* H264_DEC Peripheral Control Register */
-#define MC_ME_PCTL216 (MC_ME_BASE_ADDR + 0x0000019B)
-/* H264_ENC Peripheral Control Register */
-#define MC_ME_PCTL220 (MC_ME_BASE_ADDR + 0x0000019F)
-/* MBIST Peripheral Control Register */
-#define MC_ME_PCTL236 (MC_ME_BASE_ADDR + 0x000001A9)
-
-/* Core status register */
-#define MC_ME_CS (MC_ME_BASE_ADDR + 0x000001C0)
-
-#endif
-
-#endif /*__ARCH_ARM_MACH_S32V234_MCME_REGS_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__
-#define __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__
-
-#define MC_RGM_DES (MC_RGM_BASE_ADDR)
-#define MC_RGM_FES (MC_RGM_BASE_ADDR + 0x300)
-#define MC_RGM_FERD (MC_RGM_BASE_ADDR + 0x310)
-#define MC_RGM_FBRE (MC_RGM_BASE_ADDR + 0x330)
-#define MC_RGM_FESS (MC_RGM_BASE_ADDR + 0x340)
-#define MC_RGM_DDR_HE (MC_RGM_BASE_ADDR + 0x350)
-#define MC_RGM_DDR_HS (MC_RGM_BASE_ADDR + 0x354)
-#define MC_RGM_FRHE (MC_RGM_BASE_ADDR + 0x358)
-#define MC_RGM_FREC (MC_RGM_BASE_ADDR + 0x600)
-#define MC_RGM_FRET (MC_RGM_BASE_ADDR + 0x607)
-#define MC_RGM_DRET (MC_RGM_BASE_ADDR + 0x60B)
-
-/* function reset sources mask */
-#define F_SWT4 0x8000
-#define F_JTAG 0x400
-#define F_FCCU_SOFT 0x40
-#define F_FCCU_HARD 0x20
-#define F_SOFT_FUNC 0x8
-#define F_ST_DONE 0x4
-#define F_EXT_RST 0x1
-
-#endif /* __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_MMDC_H__
-#define __ARCH_ARM_MACH_S32V234_MMDC_H__
-
-#define MMDC0 0
-#define MMDC1 1
-
-#define MMDC_MDCTL 0x0
-#define MMDC_MDPDC 0x4
-#define MMDC_MDOTC 0x8
-#define MMDC_MDCFG0 0xC
-#define MMDC_MDCFG1 0x10
-#define MMDC_MDCFG2 0x14
-#define MMDC_MDMISC 0x18
-#define MMDC_MDSCR 0x1C
-#define MMDC_MDREF 0x20
-#define MMDC_MDRWD 0x2C
-#define MMDC_MDOR 0x30
-#define MMDC_MDMRR 0x34
-#define MMDC_MDCFG3LP 0x38
-#define MMDC_MDMR4 0x3C
-#define MMDC_MDASP 0x40
-#define MMDC_MAARCR 0x400
-#define MMDC_MAPSR 0x404
-#define MMDC_MAEXIDR0 0x408
-#define MMDC_MAEXIDR1 0x40C
-#define MMDC_MADPCR0 0x410
-#define MMDC_MADPCR1 0x414
-#define MMDC_MADPSR0 0x418
-#define MMDC_MADPSR1 0x41C
-#define MMDC_MADPSR2 0x420
-#define MMDC_MADPSR3 0x424
-#define MMDC_MADPSR4 0x428
-#define MMDC_MADPSR5 0x42C
-#define MMDC_MASBS0 0x430
-#define MMDC_MASBS1 0x434
-#define MMDC_MAGENP 0x440
-#define MMDC_MPZQHWCTRL 0x800
-#define MMDC_MPWLGCR 0x808
-#define MMDC_MPWLDECTRL0 0x80C
-#define MMDC_MPWLDECTRL1 0x810
-#define MMDC_MPWLDLST 0x814
-#define MMDC_MPODTCTRL 0x818
-#define MMDC_MPRDDQBY0DL 0x81C
-#define MMDC_MPRDDQBY1DL 0x820
-#define MMDC_MPRDDQBY2DL 0x824
-#define MMDC_MPRDDQBY3DL 0x828
-#define MMDC_MPDGCTRL0 0x83C
-#define MMDC_MPDGCTRL1 0x840
-#define MMDC_MPDGDLST0 0x844
-#define MMDC_MPRDDLCTL 0x848
-#define MMDC_MPRDDLST 0x84C
-#define MMDC_MPWRDLCTL 0x850
-#define MMDC_MPWRDLST 0x854
-#define MMDC_MPZQLP2CTL 0x85C
-#define MMDC_MPRDDLHWCTL 0x860
-#define MMDC_MPWRDLHWCTL 0x864
-#define MMDC_MPRDDLHWST0 0x868
-#define MMDC_MPRDDLHWST1 0x86C
-#define MMDC_MPWRDLHWST1 0x870
-#define MMDC_MPWRDLHWST2 0x874
-#define MMDC_MPWLHWERR 0x878
-#define MMDC_MPDGHWST0 0x87C
-#define MMDC_MPDGHWST1 0x880
-#define MMDC_MPDGHWST2 0x884
-#define MMDC_MPDGHWST3 0x888
-#define MMDC_MPPDCMPR1 0x88C
-#define MMDC_MPPDCMPR2 0x890
-#define MMDC_MPSWDAR0 0x894
-#define MMDC_MPSWDRDR0 0x898
-#define MMDC_MPSWDRDR1 0x89C
-#define MMDC_MPSWDRDR2 0x8A0
-#define MMDC_MPSWDRDR3 0x8A4
-#define MMDC_MPSWDRDR4 0x8A8
-#define MMDC_MPSWDRDR5 0x8AC
-#define MMDC_MPSWDRDR6 0x8B0
-#define MMDC_MPSWDRDR7 0x8B4
-#define MMDC_MPMUR0 0x8B8
-#define MMDC_MPDCCR 0x8C0
-
-#define MMDC_MPMUR0_FRC_MSR (1 << 11)
-#define MMDC_MPZQHWCTRL_ZQ_HW_FOR (1 << 16)
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#ifndef __ARCH_ARM_MACH_S32V234_SIUL_H__
-#define __ARCH_ARM_MACH_S32V234_SIUL_H__
-
-#include "ddr.h"
-
-#define SIUL2_MIDR1 (SIUL2_BASE_ADDR + 0x00000004)
-#define SIUL2_MIDR2 (SIUL2_BASE_ADDR + 0x00000008)
-#define SIUL2_DISR0 (SIUL2_BASE_ADDR + 0x00000010)
-#define SIUL2_DIRER0 (SIUL2_BASE_ADDR + 0x00000018)
-#define SIUL2_DIRSR0 (SIUL2_BASE_ADDR + 0x00000020)
-#define SIUL2_IREER0 (SIUL2_BASE_ADDR + 0x00000028)
-#define SIUL2_IFEER0 (SIUL2_BASE_ADDR + 0x00000030)
-#define SIUL2_IFER0 (SIUL2_BASE_ADDR + 0x00000038)
-
-#define SIUL2_IFMCR_BASE (SIUL2_BASE_ADDR + 0x00000040)
-#define SIUL2_IFMCRn(i) (SIUL2_IFMCR_BASE + 4 * (i))
-
-#define SIUL2_IFCPR (SIUL2_BASE_ADDR + 0x000000C0)
-
-/* SIUL2_MSCR specifications as stated in Reference Manual:
- * 0 - 359 Output Multiplexed Signal Configuration Registers
- * 512- 1023 Input Multiplexed Signal Configuration Registers */
-#define SIUL2_MSCR_BASE (SIUL2_BASE_ADDR + 0x00000240)
-#define SIUL2_MSCRn(i) (SIUL2_MSCR_BASE + 4 * (i))
-
-#define SIUL2_IMCR_BASE (SIUL2_BASE_ADDR + 0x00000A40)
-#define SIUL2_IMCRn(i) (SIUL2_IMCR_BASE + 4 * (i))
-
-#define SIUL2_GPDO_BASE (SIUL2_BASE_ADDR + 0x00001300)
-#define SIUL2_GPDOn(i) (SIUL2_GPDO_BASE + 4 * (i))
-
-#define SIUL2_GPDI_BASE (SIUL2_BASE_ADDR + 0x00001500)
-#define SIUL2_GPDIn(i) (SIUL2_GPDI_BASE + 4 * (i))
-
-#define SIUL2_PGPDO_BASE (SIUL2_BASE_ADDR + 0x00001700)
-#define SIUL2_PGPDOn(i) (SIUL2_PGPDO_BASE + 2 * (i))
-
-#define SIUL2_PGPDI_BASE (SIUL2_BASE_ADDR + 0x00001740)
-#define SIUL2_PGPDIn(i) (SIUL2_PGPDI_BASE + 2 * (i))
-
-#define SIUL2_MPGPDO_BASE (SIUL2_BASE_ADDR + 0x00001780)
-#define SIUL2_MPGPDOn(i) (SIUL2_MPGPDO_BASE + 4 * (i))
-
-/* SIUL2_MSCR masks */
-#define SIUL2_MSCR_DDR_DO_TRIM(v) ((v) & 0xC0000000)
-#define SIUL2_MSCR_DDR_DO_TRIM_MIN (0 << 30)
-#define SIUL2_MSCR_DDR_DO_TRIM_50PS (1 << 30)
-#define SIUL2_MSCR_DDR_DO_TRIM_100PS (2 << 30)
-#define SIUL2_MSCR_DDR_DO_TRIM_150PS (3 << 30)
-
-#define SIUL2_MSCR_DDR_INPUT(v) ((v) & 0x20000000)
-#define SIUL2_MSCR_DDR_INPUT_CMOS (0 << 29)
-#define SIUL2_MSCR_DDR_INPUT_DIFF_DDR (1 << 29)
-
-#define SIUL2_MSCR_DDR_SEL(v) ((v) & 0x18000000)
-#define SIUL2_MSCR_DDR_SEL_DDR3 (0 << 27)
-#define SIUL2_MSCR_DDR_SEL_LPDDR2 (2 << 27)
-
-#define SIUL2_MSCR_DDR_ODT(v) ((v) & 0x07000000)
-#define SIUL2_MSCR_DDR_ODT_120ohm (1 << 24)
-#define SIUL2_MSCR_DDR_ODT_60ohm (2 << 24)
-#define SIUL2_MSCR_DDR_ODT_40ohm (3 << 24)
-#define SIUL2_MSCR_DDR_ODT_30ohm (4 << 24)
-#define SIUL2_MSCR_DDR_ODT_24ohm (5 << 24)
-#define SIUL2_MSCR_DDR_ODT_20ohm (6 << 24)
-#define SIUL2_MSCR_DDR_ODT_17ohm (7 << 24)
-
-#define SIUL2_MSCR_DCYCLE_TRIM(v) ((v) & 0x00C00000)
-#define SIUL2_MSCR_DCYCLE_TRIM_NONE (0 << 22)
-#define SIUL2_MSCR_DCYCLE_TRIM_LEFT (1 << 22)
-#define SIUL2_MSCR_DCYCLE_TRIM_RIGHT (2 << 22)
-
-#define SIUL2_MSCR_OBE(v) ((v) & 0x00200000)
-#define SIUL2_MSCR_OBE_EN (1 << 21)
-
-#define SIUL2_MSCR_ODE(v) ((v) & 0x00100000)
-#define SIUL2_MSCR_ODE_EN (1 << 20)
-
-#define SIUL2_MSCR_IBE(v) ((v) & 0x00010000)
-#define SIUL2_MSCR_IBE_EN (1 << 19)
-
-#define SIUL2_MSCR_HYS(v) ((v) & 0x00400000)
-#define SIUL2_MSCR_HYS_EN (1 << 18)
-
-#define SIUL2_MSCR_INV(v) ((v) & 0x00020000)
-#define SIUL2_MSCR_INV_EN (1 << 17)
-
-#define SIUL2_MSCR_PKE(v) ((v) & 0x00010000)
-#define SIUL2_MSCR_PKE_EN (1 << 16)
-
-#define SIUL2_MSCR_SRE(v) ((v) & 0x0000C000)
-#define SIUL2_MSCR_SRE_SPEED_LOW_50 (0 << 14)
-#define SIUL2_MSCR_SRE_SPEED_LOW_100 (1 << 14)
-#define SIUL2_MSCR_SRE_SPEED_HIGH_100 (2 << 14)
-#define SIUL2_MSCR_SRE_SPEED_HIGH_200 (3 << 14)
-
-#define SIUL2_MSCR_PUE(v) ((v) & 0x00002000)
-#define SIUL2_MSCR_PUE_EN (1 << 13)
-
-#define SIUL2_MSCR_PUS(v) ((v) & 0x00001800)
-#define SIUL2_MSCR_PUS_100K_DOWN (0 << 11)
-#define SIUL2_MSCR_PUS_50K_DOWN (1 << 11)
-#define SIUL2_MSCR_PUS_100K_UP (2 << 11)
-#define SIUL2_MSCR_PUS_33K_UP (3 << 11)
-
-#define SIUL2_MSCR_DSE(v) ((v) & 0x00000700)
-#define SIUL2_MSCR_DSE_240ohm (1 << 8)
-#define SIUL2_MSCR_DSE_120ohm (2 << 8)
-#define SIUL2_MSCR_DSE_80ohm (3 << 8)
-#define SIUL2_MSCR_DSE_60ohm (4 << 8)
-#define SIUL2_MSCR_DSE_48ohm (5 << 8)
-#define SIUL2_MSCR_DSE_40ohm (6 << 8)
-#define SIUL2_MSCR_DSE_34ohm (7 << 8)
-
-#define SIUL2_MSCR_CRPOINT_TRIM(v) ((v) & 0x000000C0)
-#define SIUL2_MSCR_CRPOINT_TRIM_1 (1 << 6)
-
-#define SIUL2_MSCR_SMC(v) ((v) & 0x00000020)
-#define SIUL2_MSCR_MUX_MODE(v) ((v) & 0x0000000f)
-#define SIUL2_MSCR_MUX_MODE_ALT1 (0x1)
-#define SIUL2_MSCR_MUX_MODE_ALT2 (0x2)
-#define SIUL2_MSCR_MUX_MODE_ALT3 (0x3)
-
-/* UART settings */
-#define SIUL2_UART0_TXD_PAD 12
-#define SIUL2_UART_TXD (SIUL2_MSCR_OBE_EN | SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_60ohm | \
- SIUL2_MSCR_SRE_SPEED_LOW_100 | SIUL2_MSCR_MUX_MODE_ALT1)
-
-#define SIUL2_UART0_MSCR_RXD_PAD 11
-#define SIUL2_UART0_IMCR_RXD_PAD 200
-
-#define SIUL2_UART_MSCR_RXD (SIUL2_MSCR_PUE_EN | SIUL2_MSCR_IBE_EN | SIUL2_MSCR_DCYCLE_TRIM_RIGHT)
-#define SIUL2_UART_IMCR_RXD (SIUL2_MSCR_MUX_MODE_ALT2)
-
-/* uSDHC settings */
-#define SIUL2_USDHC_PAD_CTRL_BASE (SIUL2_MSCR_SRE_SPEED_HIGH_200 | SIUL2_MSCR_OBE_EN | \
- SIUL2_MSCR_DSE_34ohm | SIUL2_MSCR_PKE_EN | SIUL2_MSCR_IBE_EN | \
- SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_PUE_EN )
-#define SIUL2_USDHC_PAD_CTRL_CMD (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT1)
-#define SIUL2_USDHC_PAD_CTRL_CLK (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT2)
-#define SIUL2_USDHC_PAD_CTRL_DAT0_3 (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT2)
-#define SIUL2_USDHC_PAD_CTRL_DAT4_7 (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT3)
-
-#endif /*__ARCH_ARM_MACH_S32V234_SIUL_H__ */
+++ /dev/null
-if TARGET_S32V234EVB
-
-config SYS_CPU
- string
- default "armv8"
-
-config SYS_BOARD
- string
- default "s32v234evb"
-
-config SYS_VENDOR
- string
- default "freescale"
-
-config SYS_SOC
- string
- default "s32v234"
-
-config SYS_CONFIG_NAME
- string
- default "s32v234evb"
-
-endif
+++ /dev/null
-S32V234 Evaluation BOARD
-M: Eddy Petrișor <eddy.petrisor@gmail.com>
-S: Maintained
-F: arch/arm/cpu/armv8/s32v234/
-F: arch/arm/include/asm/arch-s32v234/
-F: board/freescale/s32v234evb/
-F: include/configs/s32v234evb.h
-F: configs/s32v234evb_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2013-2015, Freescale Semiconductor, Inc.
-
-obj-y := clock.o
-obj-y += lpddr2.o
-obj-y += s32v234evb.o
-
-#########################################################################
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mc_cgm_regs.h>
-#include <asm/arch/mc_me_regs.h>
-#include <asm/arch/clock.h>
-
-/*
- * Select the clock reference for required pll.
- * pll - ARM_PLL, PERIPH_PLL, ENET_PLL, DDR_PLL, VIDEO_PLL.
- * refclk_freq - input referece clock frequency (FXOSC - 40 MHZ, FIRC - 48 MHZ)
- */
-static int select_pll_source_clk(enum pll_type pll, u32 refclk_freq)
-{
- u32 clk_src;
- u32 pll_idx;
- volatile struct src *src = (struct src *)SRC_SOC_BASE_ADDR;
-
- /* select the pll clock source */
- switch (refclk_freq) {
- case FIRC_CLK_FREQ:
- clk_src = SRC_GPR1_FIRC_CLK_SOURCE;
- break;
- case XOSC_CLK_FREQ:
- clk_src = SRC_GPR1_XOSC_CLK_SOURCE;
- break;
- default:
- /* The clock frequency for the source clock is unknown */
- return -1;
- }
- /*
- * The hardware definition is not uniform, it has to calculate again
- * the recurrence formula.
- */
- switch (pll) {
- case PERIPH_PLL:
- pll_idx = 3;
- break;
- case ENET_PLL:
- pll_idx = 1;
- break;
- case DDR_PLL:
- pll_idx = 2;
- break;
- default:
- pll_idx = pll;
- }
-
- writel(readl(&src->gpr1) | SRC_GPR1_PLL_SOURCE(pll_idx, clk_src),
- &src->gpr1);
-
- return 0;
-}
-
-static void entry_to_target_mode(u32 mode)
-{
- writel(mode | MC_ME_MCTL_KEY, MC_ME_MCTL);
- writel(mode | MC_ME_MCTL_INVERTEDKEY, MC_ME_MCTL);
- while ((readl(MC_ME_GS) & MC_ME_GS_S_MTRANS) != 0x00000000) ;
-}
-
-/*
- * Program the pll according to the input parameters.
- * pll - ARM_PLL, PERIPH_PLL, ENET_PLL, DDR_PLL, VIDEO_PLL.
- * refclk_freq - input reference clock frequency (FXOSC - 40 MHZ, FIRC - 48 MHZ)
- * freq - expected output frequency for PHY0
- * freq1 - expected output frequency for PHY1
- * dfs_nr - number of DFS modules for current PLL
- * dfs - array with the activation dfs field, mfn and mfi
- * plldv_prediv - divider of clkfreq_ref
- * plldv_mfd - loop multiplication factor divider
- * pllfd_mfn - numerator loop multiplication factor divider
- * Please consult the PLLDIG chapter of platform manual
- * before to use this function.
- *)
- */
-static int program_pll(enum pll_type pll, u32 refclk_freq, u32 freq0, u32 freq1,
- u32 dfs_nr, u32 dfs[][DFS_PARAMS_Nr], u32 plldv_prediv,
- u32 plldv_mfd, u32 pllfd_mfn)
-{
- u32 i, rfdphi1, rfdphi, dfs_on = 0, fvco;
-
- /*
- * This formula is from platform reference manual (Rev. 1, 6/2015), PLLDIG chapter.
- */
- fvco =
- (refclk_freq / plldv_prediv) * (plldv_mfd +
- pllfd_mfn / (float)20480);
-
- /*
- * VCO should have value in [ PLL_MIN_FREQ, PLL_MAX_FREQ ]. Please consult
- * the platform DataSheet in order to determine the allowed values.
- */
-
- if (fvco < PLL_MIN_FREQ || fvco > PLL_MAX_FREQ) {
- return -1;
- }
-
- if (select_pll_source_clk(pll, refclk_freq) < 0) {
- return -1;
- }
-
- rfdphi = fvco / freq0;
-
- rfdphi1 = (freq1 == 0) ? 0 : fvco / freq1;
-
- writel(PLLDIG_PLLDV_RFDPHI1_SET(rfdphi1) |
- PLLDIG_PLLDV_RFDPHI_SET(rfdphi) |
- PLLDIG_PLLDV_PREDIV_SET(plldv_prediv) |
- PLLDIG_PLLDV_MFD(plldv_mfd), PLLDIG_PLLDV(pll));
-
- writel(readl(PLLDIG_PLLFD(pll)) | PLLDIG_PLLFD_MFN_SET(pllfd_mfn) |
- PLLDIG_PLLFD_SMDEN, PLLDIG_PLLFD(pll));
-
- /* switch on the pll in current mode */
- writel(readl(MC_ME_RUNn_MC(0)) | MC_ME_RUNMODE_MC_PLL(pll),
- MC_ME_RUNn_MC(0));
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
- /* Only ARM_PLL, ENET_PLL and DDR_PLL */
- if ((pll == ARM_PLL) || (pll == ENET_PLL) || (pll == DDR_PLL)) {
- /* DFS clk enable programming */
- writel(DFS_CTRL_DLL_RESET, DFS_CTRL(pll));
-
- writel(DFS_DLLPRG1_CPICTRL_SET(0x5) |
- DFS_DLLPRG1_VSETTLCTRL_SET(0x1) |
- DFS_DLLPRG1_CALBYPEN_SET(0x0) |
- DFS_DLLPRG1_DACIN_SET(0x1) | DFS_DLLPRG1_LCKWT_SET(0x0) |
- DFS_DLLPRG1_V2IGC_SET(0x5), DFS_DLLPRG1(pll));
-
- for (i = 0; i < dfs_nr; i++) {
- if (dfs[i][0]) {
- writel(DFS_DVPORTn_MFI_SET(dfs[i][2]) |
- DFS_DVPORTn_MFN_SET(dfs[i][1]),
- DFS_DVPORTn(pll, i));
- dfs_on |= (dfs[i][0] << i);
- }
- }
-
- writel(readl(DFS_CTRL(pll)) & ~DFS_CTRL_DLL_RESET,
- DFS_CTRL(pll));
- writel(readl(DFS_PORTRESET(pll)) &
- ~DFS_PORTRESET_PORTRESET_SET(dfs_on),
- DFS_PORTRESET(pll));
- while ((readl(DFS_PORTSR(pll)) & dfs_on) != dfs_on) ;
- }
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
- return 0;
-
-}
-
-static void aux_source_clk_config(uintptr_t cgm_addr, u8 ac, u32 source)
-{
- /* select the clock source */
- writel(MC_CGM_ACn_SEL_SET(source), CGM_ACn_SC(cgm_addr, ac));
-}
-
-static void aux_div_clk_config(uintptr_t cgm_addr, u8 ac, u8 dc, u32 divider)
-{
- /* set the divider */
- writel(MC_CGM_ACn_DCm_DE | MC_CGM_ACn_DCm_PREDIV(divider),
- CGM_ACn_DCm(cgm_addr, ac, dc));
-}
-
-static void setup_sys_clocks(void)
-{
-
- /* set ARM PLL DFS 1 as SYSCLK */
- writel((readl(MC_ME_RUNn_MC(0)) & ~MC_ME_RUNMODE_MC_SYSCLK_MASK) |
- MC_ME_RUNMODE_MC_SYSCLK(0x2), MC_ME_RUNn_MC(0));
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
- /* select sysclks ARMPLL, ARMPLLDFS2, ARMPLLDFS3 */
- writel(MC_ME_RUNMODE_SEC_CC_I_SYSCLK
- (0x2,
- MC_ME_RUNMODE_SEC_CC_I_SYSCLK1_OFFSET) |
- MC_ME_RUNMODE_SEC_CC_I_SYSCLK(0x2,
- MC_ME_RUNMODE_SEC_CC_I_SYSCLK2_OFFSET)
- | MC_ME_RUNMODE_SEC_CC_I_SYSCLK(0x2,
- MC_ME_RUNMODE_SEC_CC_I_SYSCLK3_OFFSET),
- MC_ME_RUNn_SEC_CC_I(0));
-
- /* setup the sys clock divider for CORE_CLK (1000MHz) */
- writel(MC_CGM_SC_DCn_DE | MC_CGM_SC_DCn_PREDIV(0x0),
- CGM_SC_DCn(MC_CGM1_BASE_ADDR, 0));
-
- /* setup the sys clock divider for CORE2_CLK (500MHz) */
- writel(MC_CGM_SC_DCn_DE | MC_CGM_SC_DCn_PREDIV(0x1),
- CGM_SC_DCn(MC_CGM1_BASE_ADDR, 1));
- /* setup the sys clock divider for SYS3_CLK (266 MHz) */
- writel(MC_CGM_SC_DCn_DE | MC_CGM_SC_DCn_PREDIV(0x0),
- CGM_SC_DCn(MC_CGM0_BASE_ADDR, 0));
-
- /* setup the sys clock divider for SYS6_CLK (133 Mhz) */
- writel(MC_CGM_SC_DCn_DE | MC_CGM_SC_DCn_PREDIV(0x1),
- CGM_SC_DCn(MC_CGM0_BASE_ADDR, 1));
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
-}
-
-static void setup_aux_clocks(void)
-{
- /*
- * setup the aux clock divider for PERI_CLK
- * (source: PERIPH_PLL_PHI_0/5, PERI_CLK - 80 MHz)
- */
- aux_source_clk_config(MC_CGM0_BASE_ADDR, 5, MC_CGM_ACn_SEL_PERPLLDIVX);
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 5, 0, 4);
-
- /* setup the aux clock divider for LIN_CLK (40MHz) */
- aux_source_clk_config(MC_CGM0_BASE_ADDR, 3, MC_CGM_ACn_SEL_PERPLLDIVX);
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 3, 0, 1);
-
- /* setup the aux clock divider for ENET_TIME_CLK (50MHz) */
- aux_source_clk_config(MC_CGM0_BASE_ADDR, 7, MC_CGM_ACn_SEL_ENETPLL);
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 7, 1, 9);
-
- /* setup the aux clock divider for ENET_CLK (50MHz) */
- aux_source_clk_config(MC_CGM2_BASE_ADDR, 2, MC_CGM_ACn_SEL_ENETPLL);
- aux_div_clk_config(MC_CGM2_BASE_ADDR, 2, 0, 9);
-
- /* setup the aux clock divider for SDHC_CLK (50 MHz). */
- aux_source_clk_config(MC_CGM0_BASE_ADDR, 15, MC_CGM_ACn_SEL_ENETPLL);
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 15, 0, 9);
-
- /* setup the aux clock divider for DDR_CLK (533MHz) and APEX_SYS_CLK (266MHz) */
- aux_source_clk_config(MC_CGM0_BASE_ADDR, 8, MC_CGM_ACn_SEL_DDRPLL);
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 8, 0, 0);
- /* setup the aux clock divider for DDR4_CLK (133,25MHz) */
- aux_div_clk_config(MC_CGM0_BASE_ADDR, 8, 1, 3);
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
-}
-
-static void enable_modules_clock(void)
-{
- /* PIT0 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL58);
- /* PIT1 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL170);
- /* LINFLEX0 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL83);
- /* LINFLEX1 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL188);
- /* ENET */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL50);
- /* SDHC */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL93);
- /* IIC0 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL81);
- /* IIC1 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL184);
- /* IIC2 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL186);
- /* MMDC0 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL54);
- /* MMDC1 */
- writeb(MC_ME_PCTLn_RUNPCm(0), MC_ME_PCTL162);
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-}
-
-void clock_init(void)
-{
- unsigned int arm_dfs[ARM_PLL_PHI1_DFS_Nr][DFS_PARAMS_Nr] = {
- {ARM_PLL_PHI1_DFS1_EN, ARM_PLL_PHI1_DFS1_MFN,
- ARM_PLL_PHI1_DFS1_MFI},
- {ARM_PLL_PHI1_DFS2_EN, ARM_PLL_PHI1_DFS2_MFN,
- ARM_PLL_PHI1_DFS2_MFI},
- {ARM_PLL_PHI1_DFS3_EN, ARM_PLL_PHI1_DFS3_MFN,
- ARM_PLL_PHI1_DFS3_MFI}
- };
-
- unsigned int enet_dfs[ENET_PLL_PHI1_DFS_Nr][DFS_PARAMS_Nr] = {
- {ENET_PLL_PHI1_DFS1_EN, ENET_PLL_PHI1_DFS1_MFN,
- ENET_PLL_PHI1_DFS1_MFI},
- {ENET_PLL_PHI1_DFS2_EN, ENET_PLL_PHI1_DFS2_MFN,
- ENET_PLL_PHI1_DFS2_MFI},
- {ENET_PLL_PHI1_DFS3_EN, ENET_PLL_PHI1_DFS3_MFN,
- ENET_PLL_PHI1_DFS3_MFI},
- {ENET_PLL_PHI1_DFS4_EN, ENET_PLL_PHI1_DFS4_MFN,
- ENET_PLL_PHI1_DFS4_MFI}
- };
-
- unsigned int ddr_dfs[DDR_PLL_PHI1_DFS_Nr][DFS_PARAMS_Nr] = {
- {DDR_PLL_PHI1_DFS1_EN, DDR_PLL_PHI1_DFS1_MFN,
- DDR_PLL_PHI1_DFS1_MFI},
- {DDR_PLL_PHI1_DFS2_EN, DDR_PLL_PHI1_DFS2_MFN,
- DDR_PLL_PHI1_DFS2_MFI},
- {DDR_PLL_PHI1_DFS3_EN, DDR_PLL_PHI1_DFS3_MFN,
- DDR_PLL_PHI1_DFS3_MFI}
- };
-
- writel(MC_ME_RUN_PCn_DRUN | MC_ME_RUN_PCn_RUN0 | MC_ME_RUN_PCn_RUN1 |
- MC_ME_RUN_PCn_RUN2 | MC_ME_RUN_PCn_RUN3, MC_ME_RUN_PCn(0));
-
- /* turn on FXOSC */
- writel(MC_ME_RUNMODE_MC_MVRON | MC_ME_RUNMODE_MC_XOSCON |
- MC_ME_RUNMODE_MC_FIRCON | MC_ME_RUNMODE_MC_SYSCLK(0x1),
- MC_ME_RUNn_MC(0));
-
- entry_to_target_mode(MC_ME_MCTL_RUN0);
-
- program_pll(ARM_PLL, XOSC_CLK_FREQ, ARM_PLL_PHI0_FREQ,
- ARM_PLL_PHI1_FREQ, ARM_PLL_PHI1_DFS_Nr, arm_dfs,
- ARM_PLL_PLLDV_PREDIV, ARM_PLL_PLLDV_MFD, ARM_PLL_PLLDV_MFN);
-
- setup_sys_clocks();
-
- program_pll(PERIPH_PLL, XOSC_CLK_FREQ, PERIPH_PLL_PHI0_FREQ,
- PERIPH_PLL_PHI1_FREQ, PERIPH_PLL_PHI1_DFS_Nr, NULL,
- PERIPH_PLL_PLLDV_PREDIV, PERIPH_PLL_PLLDV_MFD,
- PERIPH_PLL_PLLDV_MFN);
-
- program_pll(ENET_PLL, XOSC_CLK_FREQ, ENET_PLL_PHI0_FREQ,
- ENET_PLL_PHI1_FREQ, ENET_PLL_PHI1_DFS_Nr, enet_dfs,
- ENET_PLL_PLLDV_PREDIV, ENET_PLL_PLLDV_MFD,
- ENET_PLL_PLLDV_MFN);
-
- program_pll(DDR_PLL, XOSC_CLK_FREQ, DDR_PLL_PHI0_FREQ,
- DDR_PLL_PHI1_FREQ, DDR_PLL_PHI1_DFS_Nr, ddr_dfs,
- DDR_PLL_PLLDV_PREDIV, DDR_PLL_PLLDV_MFD, DDR_PLL_PLLDV_MFN);
-
- program_pll(VIDEO_PLL, XOSC_CLK_FREQ, VIDEO_PLL_PHI0_FREQ,
- VIDEO_PLL_PHI1_FREQ, VIDEO_PLL_PHI1_DFS_Nr, NULL,
- VIDEO_PLL_PLLDV_PREDIV, VIDEO_PLL_PLLDV_MFD,
- VIDEO_PLL_PLLDV_MFN);
-
- setup_aux_clocks();
-
- enable_modules_clock();
-
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2015, Freescale Semiconductor, Inc.
- */
-
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/siul.h>
-#include <asm/arch/lpddr2.h>
-#include <asm/arch/mmdc.h>
-
-volatile int mscr_offset_ck0;
-
-void lpddr2_config_iomux(uint8_t module)
-{
- int i;
-
- switch (module) {
- case DDR0:
- mscr_offset_ck0 = SIUL2_MSCRn(_DDR0_CKE0);
- writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR0_CLK0));
-
- writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE0));
- writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE1));
-
- writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B0));
- writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B1));
-
- for (i = _DDR0_DM0; i <= _DDR0_DM3; i++)
- writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR0_DQS0; i <= _DDR0_DQS3; i++)
- writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR0_A0; i <= _DDR0_A9; i++)
- writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR0_D0; i <= _DDR0_D31; i++)
- writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
- break;
- case DDR1:
- writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR1_CLK0));
-
- writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE0));
- writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE1));
-
- writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B0));
- writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B1));
-
- for (i = _DDR1_DM0; i <= _DDR1_DM3; i++)
- writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR1_DQS0; i <= _DDR1_DQS3; i++)
- writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR1_A0; i <= _DDR1_A9; i++)
- writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
-
- for (i = _DDR1_D0; i <= _DDR1_D31; i++)
- writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
- break;
- }
-}
-
-void config_mmdc(uint8_t module)
-{
- unsigned long mmdc_addr = (module) ? MMDC1_BASE_ADDR : MMDC0_BASE_ADDR;
-
- writel(MMDC_MDSCR_CFG_VALUE, mmdc_addr + MMDC_MDSCR);
-
- writel(MMDC_MDCFG0_VALUE, mmdc_addr + MMDC_MDCFG0);
- writel(MMDC_MDCFG1_VALUE, mmdc_addr + MMDC_MDCFG1);
- writel(MMDC_MDCFG2_VALUE, mmdc_addr + MMDC_MDCFG2);
- writel(MMDC_MDCFG3LP_VALUE, mmdc_addr + MMDC_MDCFG3LP);
- writel(MMDC_MDOTC_VALUE, mmdc_addr + MMDC_MDOTC);
- writel(MMDC_MDMISC_VALUE, mmdc_addr + MMDC_MDMISC);
- writel(MMDC_MDOR_VALUE, mmdc_addr + MMDC_MDOR);
- writel(_MDCTL, mmdc_addr + MMDC_MDCTL);
-
- writel(MMDC_MPMUR0_VALUE, mmdc_addr + MMDC_MPMUR0);
-
- while (readl(mmdc_addr + MMDC_MPMUR0) & MMDC_MPMUR0_FRC_MSR) {
- }
-
- writel(MMDC_MDSCR_RST_VALUE, mmdc_addr + MMDC_MDSCR);
-
- /* Perform ZQ calibration */
- writel(MMDC_MPZQLP2CTL_VALUE, mmdc_addr + MMDC_MPZQLP2CTL);
- writel(MMDC_MPZQHWCTRL_VALUE, mmdc_addr + MMDC_MPZQHWCTRL);
- while (readl(mmdc_addr + MMDC_MPZQHWCTRL) & MMDC_MPZQHWCTRL_ZQ_HW_FOR) {
- }
-
- /* Enable MMDC with CS0 */
- writel(_MDCTL + 0x80000000, mmdc_addr + MMDC_MDCTL);
-
- /* Complete the initialization sequence as defined by JEDEC */
- writel(MMDC_MDSCR_MR1_VALUE, mmdc_addr + MMDC_MDSCR);
- writel(MMDC_MDSCR_MR2_VALUE, mmdc_addr + MMDC_MDSCR);
- writel(MMDC_MDSCR_MR3_VALUE, mmdc_addr + MMDC_MDSCR);
- writel(MMDC_MDSCR_MR10_VALUE, mmdc_addr + MMDC_MDSCR);
-
- /* Set the amount of DRAM */
- /* Set DQS settings based on board type */
-
- switch (module) {
- case MMDC0:
- writel(MMDC_MDASP_MODULE0_VALUE, mmdc_addr + MMDC_MDASP);
- writel(MMDC_MPRDDLCTL_MODULE0_VALUE,
- mmdc_addr + MMDC_MPRDDLCTL);
- writel(MMDC_MPWRDLCTL_MODULE0_VALUE,
- mmdc_addr + MMDC_MPWRDLCTL);
- writel(MMDC_MPDGCTRL0_MODULE0_VALUE,
- mmdc_addr + MMDC_MPDGCTRL0);
- writel(MMDC_MPDGCTRL1_MODULE0_VALUE,
- mmdc_addr + MMDC_MPDGCTRL1);
- break;
- case MMDC1:
- writel(MMDC_MDASP_MODULE1_VALUE, mmdc_addr + MMDC_MDASP);
- writel(MMDC_MPRDDLCTL_MODULE1_VALUE,
- mmdc_addr + MMDC_MPRDDLCTL);
- writel(MMDC_MPWRDLCTL_MODULE1_VALUE,
- mmdc_addr + MMDC_MPWRDLCTL);
- writel(MMDC_MPDGCTRL0_MODULE1_VALUE,
- mmdc_addr + MMDC_MPDGCTRL0);
- writel(MMDC_MPDGCTRL1_MODULE1_VALUE,
- mmdc_addr + MMDC_MPDGCTRL1);
- break;
- }
-
- writel(MMDC_MDRWD_VALUE, mmdc_addr + MMDC_MDRWD);
- writel(MMDC_MDPDC_VALUE, mmdc_addr + MMDC_MDPDC);
- writel(MMDC_MDREF_VALUE, mmdc_addr + MMDC_MDREF);
- writel(MMDC_MPODTCTRL_VALUE, mmdc_addr + MMDC_MPODTCTRL);
- writel(MMDC_MDSCR_DEASSERT_VALUE, mmdc_addr + MMDC_MDSCR);
-
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013-2015, Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/siul.h>
-#include <asm/arch/lpddr2.h>
-#include <asm/arch/clock.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void setup_iomux_ddr(void)
-{
- lpddr2_config_iomux(DDR0);
- lpddr2_config_iomux(DDR1);
-
-}
-
-void ddr_phy_init(void)
-{
-}
-
-void ddr_ctrl_init(void)
-{
- config_mmdc(0);
- config_mmdc(1);
-}
-
-int dram_init(void)
-{
- setup_iomux_ddr();
-
- ddr_ctrl_init();
-
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
- return 0;
-}
-
-static void setup_iomux_uart(void)
-{
- /* Muxing for linflex */
- /* Replace the magic values after bringup */
-
- /* set TXD - MSCR[12] PA12 */
- writel(SIUL2_UART_TXD, SIUL2_MSCRn(SIUL2_UART0_TXD_PAD));
-
- /* set RXD - MSCR[11] - PA11 */
- writel(SIUL2_UART_MSCR_RXD, SIUL2_MSCRn(SIUL2_UART0_MSCR_RXD_PAD));
-
- /* set RXD - IMCR[200] - 200 */
- writel(SIUL2_UART_IMCR_RXD, SIUL2_IMCRn(SIUL2_UART0_IMCR_RXD_PAD));
-}
-
-static void setup_iomux_enet(void)
-{
-}
-
-static void setup_iomux_i2c(void)
-{
-}
-
-#ifdef CONFIG_SYS_USE_NAND
-void setup_iomux_nfc(void)
-{
-}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
- {USDHC_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- /* eSDHC1 is always present */
- return 1;
-}
-
-int board_mmc_init(struct bd_info * bis)
-{
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_USDHC_CLK);
-
- /* Set iomux PADS for USDHC */
-
- /* PK6 pad: uSDHC clk */
- writel(SIUL2_USDHC_PAD_CTRL_CLK, SIUL2_MSCRn(150));
- writel(0x3, SIUL2_MSCRn(902));
-
- /* PK7 pad: uSDHC CMD */
- writel(SIUL2_USDHC_PAD_CTRL_CMD, SIUL2_MSCRn(151));
- writel(0x3, SIUL2_MSCRn(901));
-
- /* PK8 pad: uSDHC DAT0 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT0_3, SIUL2_MSCRn(152));
- writel(0x3, SIUL2_MSCRn(903));
-
- /* PK9 pad: uSDHC DAT1 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT0_3, SIUL2_MSCRn(153));
- writel(0x3, SIUL2_MSCRn(904));
-
- /* PK10 pad: uSDHC DAT2 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT0_3, SIUL2_MSCRn(154));
- writel(0x3, SIUL2_MSCRn(905));
-
- /* PK11 pad: uSDHC DAT3 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT0_3, SIUL2_MSCRn(155));
- writel(0x3, SIUL2_MSCRn(906));
-
- /* PK15 pad: uSDHC DAT4 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT4_7, SIUL2_MSCRn(159));
- writel(0x3, SIUL2_MSCRn(907));
-
- /* PL0 pad: uSDHC DAT5 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT4_7, SIUL2_MSCRn(160));
- writel(0x3, SIUL2_MSCRn(908));
-
- /* PL1 pad: uSDHC DAT6 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT4_7, SIUL2_MSCRn(161));
- writel(0x3, SIUL2_MSCRn(909));
-
- /* PL2 pad: uSDHC DAT7 */
- writel(SIUL2_USDHC_PAD_CTRL_DAT4_7, SIUL2_MSCRn(162));
- writel(0x3, SIUL2_MSCRn(910));
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-#endif
-
-static void mscm_init(void)
-{
- struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_BASE_ADDR;
- int i;
-
- for (i = 0; i < MSCM_IRSPRC_NUM; i++)
- writew(MSCM_IRSPRC_CPn_EN, &mscmir->irsprc[i]);
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- clock_init();
- mscm_init();
-
- setup_iomux_uart();
- setup_iomux_enet();
- setup_iomux_i2c();
-#ifdef CONFIG_SYS_USE_NAND
- setup_iomux_nfc();
-#endif
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: s32v234evb\n");
-
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013-2015, Freescale Semiconductor, Inc.
- */
-
-/*
- * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-#include <asm/mach-imx/imximage.cfg>
-
-/* image version */
-IMAGE_VERSION 2
-BOOT_FROM sd
-
-
-/*
- * Boot Device : one of qspi, sd:
- * qspi: flash_offset: 0x1000
- * sd/mmc: flash_offset: 0x1000
- */
-
-
-#ifdef CONFIG_IMX_HAB
-SECURE_BOOT
-#endif
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TARGET_S32V234EVB=y
-CONFIG_SYS_TEXT_BASE=0x3E800000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0xc0000000
-CONFIG_SYS_MEMTEST_END=0xc7c00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/s32v234evb/s32v234evb.cfg"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyLF0 root=/dev/ram rw"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_USDHC=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LINFLEXUART=y
-CONFIG_OF_LIBFDT=y
config FSL_USDHC
bool "Freescale/NXP i.MX uSDHC controller support"
- depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB
+ depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT
select FSL_ESDHC_IMX
help
This enables the Ultra Secured Digital Host Controller enhancements
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the Freescale S32V234 EVB board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_S32V234
-
-/* Config GIC */
-#define CONFIG_GICV2
-#define GICD_BASE 0x7D001000
-#define GICC_BASE 0x7D002000
-
-#define CONFIG_REMAKE_ELF
-#undef CONFIG_RUN_FROM_IRAM_ONLY
-
-#define CONFIG_RUN_FROM_DDR1
-#undef CONFIG_RUN_FROM_DDR0
-
-/* Run by default from DDR1 */
-#ifdef CONFIG_RUN_FROM_DDR0
-#define DDR_BASE_ADDR 0x80000000
-#else
-#define DDR_BASE_ADDR 0xC0000000
-#endif
-
-#define CONFIG_MACH_TYPE 4146
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG
-
-/* SMP Spin Table Definitions */
-#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY (1000000000) /* 1000MHz */
-#define CONFIG_SYS_FSL_ERRATUM_A008585
-
-/* Size of malloc() pool */
-#ifdef CONFIG_RUN_FROM_IRAM_ONLY
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024)
-#else
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#endif
-
-#define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR
-
-#define CONFIG_DEBUG_UART_LINFLEXUART
-#define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE
-
-#define CONFIG_SYS_UART_PORT (1)
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
-#if 0
-
-/* Ethernet config */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-#endif
-
-#if 0 /* Disable until the FLASH will be implemented */
-#define CONFIG_SYS_USE_NAND
-#endif
-
-#ifdef CONFIG_SYS_USE_NAND
-/* Nand Flash Configs */
-#define CONFIG_JFFS2_NAND
-#define MTD_NAND_FSL_NFC_SWECC 1
-#define CONFIG_NAND_FSL_NFC
-#define CONFIG_SYS_NAND_BASE 0x400E0000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
-#define CONFIG_SYS_NAND_SELECT_DEVICE
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
-#endif
-
-#define CONFIG_LOADADDR 0xC307FFC0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot_scripts=boot.scr.uimg boot.scr\0" \
- "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
- "console=ttyLF0,115200\0" \
- "fdt_file=s32v234-evb.dtb\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_addr_r=0xC2000000\0" \
- "kernel_addr_r=0xC307FFC0\0" \
- "ramdisk_addr_r=0xC4000000\0" \
- "ramdisk=rootfs.uimg\0"\
- "ip_dyn=yes\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "update_sd_firmware_filename=u-boot.imx\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
- "jtagboot=echo Booting using jtag...; " \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
- "run loaduimage; run loadramdisk; run loadfdt;"\
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "boot_net_usb_start=true\0" \
- BOOTENV
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 0) \
- func(DHCP, dhcp, na)
-
-#define CONFIG_BOOTCOMMAND \
- "run distro_bootcmd"
-
-#include <config_distro_bootcmd.h>
-#include <linux/stringify.h>
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "=> "
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-#ifdef CONFIG_RUN_FROM_IRAM_ONLY
-#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR)
-#endif
-
-/* Physical memory map */
-/* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
-#define PHYS_SDRAM (DDR_BASE_ADDR)
-#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#endif
projects / platform / kernel / u-boot.git / commitdiff