&lsio_mu1 1 2
&lsio_mu1 1 3
&lsio_mu1 3 3>;
- See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+ See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
for detailed mailbox binding.
Note: Each mu which supports general interrupt should have an alias correctly
datasheet
- clocks : phandle to the PRE axi clock input, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "axi"
- interrupts: should contain the PRE interrupt
- fsl,iram: phandle pointing to the mmio-sram device node, that should be
datasheet
- clocks : phandles to the PRG ipg and axi clock inputs, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "ipg" and "axi"
- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
PRE as the first entry and the muxable PREs following.
"di2_sel" - IPU2 DI0 mux
"di3_sel" - IPU2 DI1 mux
The needed clock numbers for each are documented in
- Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
Optional properties:
- pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
SPI Controller nodes must be child of GENI based Qualcomm Universal
Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
SPI slave nodes must be children of the SPI master node and conform to SPI bus
binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
M: Niklas Söderlund <niklas.soderlund@ragnatech.se>
L: linux-renesas-soc@vger.kernel.org
S: Supported
-F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
-F: Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+F: Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
F: drivers/thermal/rcar_gen3_thermal.c
F: drivers/thermal/rcar_thermal.c