dt-bindings: reset: Convert ti,sci-reset to json schema

Convert the ti,sci-reset to json schema for better checks and documentation.

Differences being:
 - Drop consumer example as they are documented in the corresponding
   bindings themselves.
 - Drop phandle description for reset consumer or cell definition as it is
   redundant.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210426155457.21221-2-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt
deleted file mode 100644 (file)
index 8b1cf02..0000000
--- a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Texas Instruments System Control Interface (TI-SCI) Reset Controller
-=====================================================================
-
-Some TI SoCs contain a system controller (like the Power Management Micro
-Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
-the state of the various hardware modules present on the SoC. Communication
-between the host processor running an OS and the system controller happens
-through a protocol called TI System Control Interface (TI-SCI protocol).
-For TI SCI details, please refer to the document,
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TI-SCI Reset Controller Node
-============================
-This reset controller node uses the TI SCI protocol to perform the reset
-management of various hardware modules present on the SoC. Must be a child
-node of the associated TI-SCI system controller node.
-
-Required properties:
---------------------
- - compatible  : Should be "ti,sci-reset"
- - #reset-cells        : Should be 2. Please see the reset consumer node below for
-                 usage details.
-
-TI-SCI Reset Consumer Nodes
-===========================
-Each of the reset consumer nodes should have the following properties,
-in addition to their own properties.
-
-Required properties:
---------------------
- - resets      : A phandle and reset specifier pair, one pair for each reset
-                 signal that affects the device, or that the device manages.
-                 The phandle should point to the TI-SCI reset controller node,
-                 and the reset specifier should have 2 cell-values. The first
-                 cell should contain the device ID. The second cell should
-                 contain the reset mask value used by system controller.
-                 Please refer to the protocol documentation for these values
-                 to be used for different devices,
-                 http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
-
-Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
-common reset controller usage by consumers.
-
-Example:
---------
-The following example demonstrates both a TI-SCI reset controller node and a
-consumer (a DSP device) on the 66AK2G SoC.
-
-pmmc: pmmc {
-       compatible = "ti,k2g-sci";
-
-       k2g_reset: reset-controller {
-               compatible = "ti,sci-reset";
-               #reset-cells = <2>;
-       };
-};
-
-dsp0: dsp@10800000 {
-       ...
-       resets = <&k2g_reset 0x0046 0x1>;
-       ...
-};

diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
new file mode 100644 (file)
index 0000000..4639d2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI reset controller node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This reset controller node uses the TI SCI protocol to perform the reset
+  management of various hardware modules present on the SoC. Must be a child
+  node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^reset-controller$"
+
+  compatible:
+    const: ti,sci-reset
+
+  "#reset-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the reset mask corresponding to the device
+      used by system controller.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+    };