EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
/**
- * drm_dp_link_probe() - probe a DisplayPort link for capabilities
- * @aux: DisplayPort AUX channel
- * @link: pointer to structure in which to return link capabilities
- *
- * The structure filled in by this function can usually be passed directly
- * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and
- * configure the link based on the link's capabilities.
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
- u8 values[3];
- int err;
-
- memset(link, 0, sizeof(*link));
-
- err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
- if (err < 0)
- return err;
-
- link->revision = values[0];
- link->rate = drm_dp_bw_code_to_link_rate(values[1]);
- link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK;
-
- if (values[2] & DP_ENHANCED_FRAME_CAP)
- link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_probe);
-
-/**
- * drm_dp_link_power_up() - power up a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
- u8 value;
- int err;
-
- /* DP_SET_POWER register is only available on DPCD v1.1 and later */
- if (link->revision < 0x11)
- return 0;
-
- err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
- if (err < 0)
- return err;
-
- value &= ~DP_SET_POWER_MASK;
- value |= DP_SET_POWER_D0;
-
- err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
- if (err < 0)
- return err;
-
- /*
- * According to the DP 1.1 specification, a "Sink Device must exit the
- * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
- * Control Field" (register 0x600).
- */
- usleep_range(1000, 2000);
-
- return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_power_up);
-
-/**
- * drm_dp_link_power_down() - power down a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
- u8 value;
- int err;
-
- /* DP_SET_POWER register is only available on DPCD v1.1 and later */
- if (link->revision < 0x11)
- return 0;
-
- err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
- if (err < 0)
- return err;
-
- value &= ~DP_SET_POWER_MASK;
- value |= DP_SET_POWER_D3;
-
- err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
- if (err < 0)
- return err;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_power_down);
-
-/**
- * drm_dp_link_configure() - configure a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
- u8 values[2];
- int err;
-
- values[0] = drm_dp_link_rate_to_bw_code(link->rate);
- values[1] = link->num_lanes;
-
- if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
- values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-
- err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values));
- if (err < 0)
- return err;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_configure);
-
-/**
* drm_dp_downstream_max_clock() - extract branch device max
* pixel rate for legacy VGA
* converter or max TMDS clock
drm.o \
gem.o \
fb.o \
+ dp.o \
hub.o \
plane.o \
dc.o \
--- /dev/null
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2013-2019 NVIDIA Corporation
+ * Copyright (C) 2015 Rob Clark
+ */
+
+#include <drm/drm_dp_helper.h>
+
+#include "dp.h"
+
+/**
+ * drm_dp_link_probe() - probe a DisplayPort link for capabilities
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to structure in which to return link capabilities
+ *
+ * The structure filled in by this function can usually be passed directly
+ * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and
+ * configure the link based on the link's capabilities.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+ u8 values[3];
+ int err;
+
+ memset(link, 0, sizeof(*link));
+
+ err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
+ if (err < 0)
+ return err;
+
+ link->revision = values[0];
+ link->rate = drm_dp_bw_code_to_link_rate(values[1]);
+ link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK;
+
+ if (values[2] & DP_ENHANCED_FRAME_CAP)
+ link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING;
+
+ return 0;
+}
+
+/**
+ * drm_dp_link_power_up() - power up a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+ u8 value;
+ int err;
+
+ /* DP_SET_POWER register is only available on DPCD v1.1 and later */
+ if (link->revision < 0x11)
+ return 0;
+
+ err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
+ if (err < 0)
+ return err;
+
+ value &= ~DP_SET_POWER_MASK;
+ value |= DP_SET_POWER_D0;
+
+ err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
+ if (err < 0)
+ return err;
+
+ /*
+ * According to the DP 1.1 specification, a "Sink Device must exit the
+ * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
+ * Control Field" (register 0x600).
+ */
+ usleep_range(1000, 2000);
+
+ return 0;
+}
+
+/**
+ * drm_dp_link_power_down() - power down a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+ u8 value;
+ int err;
+
+ /* DP_SET_POWER register is only available on DPCD v1.1 and later */
+ if (link->revision < 0x11)
+ return 0;
+
+ err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
+ if (err < 0)
+ return err;
+
+ value &= ~DP_SET_POWER_MASK;
+ value |= DP_SET_POWER_D3;
+
+ err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/**
+ * drm_dp_link_configure() - configure a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+ u8 values[2];
+ int err;
+
+ values[0] = drm_dp_link_rate_to_bw_code(link->rate);
+ values[1] = link->num_lanes;
+
+ if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+ values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+
+ err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
--- /dev/null
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright (C) 2013-2019 NVIDIA Corporation.
+ * Copyright (C) 2015 Rob Clark
+ */
+
+#ifndef DRM_TEGRA_DP_H
+#define DRM_TEGRA_DP_H 1
+
+struct drm_dp_aux;
+
+#define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
+
+struct drm_dp_link {
+ unsigned char revision;
+ unsigned int rate;
+ unsigned int num_lanes;
+ unsigned long capabilities;
+};
+
+int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link);
+
+#endif
#include <drm/drm_dp_helper.h>
#include <drm/drm_panel.h>
+#include "dp.h"
#include "dpaux.h"
#include "drm.h"
#include "trace.h"
#include <drm/drm_scdc_helper.h>
#include "dc.h"
+#include "dp.h"
#include "drm.h"
#include "hda.h"
#include "sor.h"
int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
u8 status[DP_LINK_STATUS_SIZE]);
-/*
- * DisplayPort link
- */
-#define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
-
-struct drm_dp_link {
- unsigned char revision;
- unsigned int rate;
- unsigned int num_lanes;
- unsigned long capabilities;
-};
-
-int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link);
-int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link);
-int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link);
-int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link);
int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
const u8 port_cap[4]);
int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],