register const char *fmt;
register rtx x = *loc;
enum rtx_code code;
+ enum machine_mode op0_mode = VOIDmode;
+ int prev_changes = num_changes;
+ rtx new;
if (!x)
return;
+
code = GET_CODE (x);
+ fmt = GET_RTX_FORMAT (code);
+ if (fmt[0] == 'e')
+ op0_mode = GET_MODE (XEXP (x, 0));
+
/* X matches FROM if it is the same rtx or they are both referring to the
same register in the same mode. Avoid calling rtx_equal_p unless the
operands look similar. */
return;
}
- /* For commutative or comparison operations, try replacing each argument
- separately and seeing if we made any changes. If so, put a constant
- argument last.*/
- if (GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == 'c')
- {
- int prev_changes = num_changes;
+ /* Call ourseves recursivly to perform the replacements. */
- validate_replace_rtx_1 (&XEXP (x, 0), from, to, object);
- validate_replace_rtx_1 (&XEXP (x, 1), from, to, object);
- if (prev_changes != num_changes && CONSTANT_P (XEXP (x, 0)))
- {
- validate_change (object, loc,
- gen_rtx_fmt_ee (GET_RTX_CLASS (code) == 'c' ? code
- : swap_condition (code),
- GET_MODE (x), XEXP (x, 1),
- XEXP (x, 0)),
- 1);
- x = *loc;
- code = GET_CODE (x);
- }
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
+ else if (fmt[i] == 'E')
+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+ validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
}
- /* Note that if CODE's RTX_CLASS is "c" or "<" we will have already
- done the substitution, otherwise we won't. */
+ /* In case we didn't substituted, there is nothing to do. */
+ if (num_changes == prev_changes)
+ return;
+
+ /* Allow substituted expression to have different mode. This is used by
+ regmove to change mode of pseudo register. */
+ if (fmt[0] == 'e' && GET_MODE (XEXP (x, 0)) != VOIDmode)
+ op0_mode = GET_MODE (XEXP (x, 0));
+
+ /* Do changes needed to keep rtx consistent. Don't do any other
+ simplifications, as it is not our job. */
+
+ if ((GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == 'c')
+ && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
+ {
+ validate_change (object, loc,
+ gen_rtx_fmt_ee (GET_RTX_CLASS (code) == 'c' ? code
+ : swap_condition (code),
+ GET_MODE (x), XEXP (x, 1),
+ XEXP (x, 0)), 1);
+ x = *loc;
+ code = GET_CODE (x);
+ }
switch (code)
{
case PLUS:
/* If we have a PLUS whose second operand is now a CONST_INT, use
- plus_constant to try to simplify it. */
+ plus_constant to try to simplify it.
+ ??? We may want later to remove this, once simplification is
+ separated from this function. */
if (GET_CODE (XEXP (x, 1)) == CONST_INT && XEXP (x, 1) == to)
- validate_change (object, loc, plus_constant (XEXP (x, 0), INTVAL (to)),
- 1);
- return;
-
+ validate_change (object, loc,
+ plus_constant (XEXP (x, 0), INTVAL (to)), 1);
+ break;
case MINUS:
- if (GET_CODE (to) == CONST_INT && XEXP (x, 1) == from)
- {
- validate_change (object, loc,
- plus_constant (XEXP (x, 0), - INTVAL (to)),
- 1);
- return;
- }
+ if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ || GET_CODE (XEXP (x, 1)) == CONST_DOUBLE)
+ validate_change (object, loc,
+ simplify_gen_binary
+ (PLUS, GET_MODE (x), XEXP (x, 0),
+ simplify_gen_unary (NEG,
+ op0_mode, XEXP (x, 1),
+ op0_mode)), 1);
break;
-
case ZERO_EXTEND:
case SIGN_EXTEND:
- /* In these cases, the operation to be performed depends on the mode
- of the operand. If we are replacing the operand with a VOIDmode
- constant, we lose the information. So try to simplify the operation
- in that case. */
- if (GET_MODE (to) == VOIDmode
- && (rtx_equal_p (XEXP (x, 0), from)
- || (GET_CODE (XEXP (x, 0)) == SUBREG
- && rtx_equal_p (SUBREG_REG (XEXP (x, 0)), from))))
+ if (GET_MODE (XEXP (x, 0)) == VOIDmode)
{
- rtx new = NULL_RTX;
-
- /* If there is a subreg involved, crop to the portion of the
- constant that we are interested in. */
- if (GET_CODE (XEXP (x, 0)) == SUBREG)
- {
- if (GET_MODE_SIZE (GET_MODE (XEXP (x, 0))) <= UNITS_PER_WORD)
- to = operand_subword (to,
- (SUBREG_BYTE (XEXP (x, 0))
- / UNITS_PER_WORD),
- 0, GET_MODE (from));
- else if (GET_MODE_CLASS (GET_MODE (from)) == MODE_INT
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
- <= HOST_BITS_PER_WIDE_INT))
- {
- int i = SUBREG_BYTE (XEXP (x, 0)) * BITS_PER_UNIT;
- HOST_WIDE_INT valh;
- unsigned HOST_WIDE_INT vall;
-
- if (GET_CODE (to) == CONST_INT)
- {
- vall = INTVAL (to);
- valh = (HOST_WIDE_INT) vall < 0 ? ~0 : 0;
- }
- else
- {
- vall = CONST_DOUBLE_LOW (to);
- valh = CONST_DOUBLE_HIGH (to);
- }
-
- if (WORDS_BIG_ENDIAN)
- i = (GET_MODE_BITSIZE (GET_MODE (from))
- - GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))) - i);
- if (i > 0 && i < HOST_BITS_PER_WIDE_INT)
- vall = vall >> i | valh << (HOST_BITS_PER_WIDE_INT - i);
- else if (i >= HOST_BITS_PER_WIDE_INT)
- vall = valh >> (i - HOST_BITS_PER_WIDE_INT);
- to = GEN_INT (trunc_int_for_mode (vall,
- GET_MODE (XEXP (x, 0))));
- }
- else
- to = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
- }
-
- /* If the above didn't fail, perform the extension from the
- mode of the operand (and not the mode of FROM). */
- if (to)
- new = simplify_unary_operation (code, GET_MODE (x), to,
- GET_MODE (XEXP (x, 0)));
-
+ new = simplify_gen_unary (code, GET_MODE (x), XEXP (x, 0),
+ op0_mode);
/* If any of the above failed, substitute in something that
we know won't be recognized. */
if (!new)
new = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
-
validate_change (object, loc, new, 1);
- return;
}
break;
-
case SUBREG:
- /* In case we are replacing by constant, attempt to simplify it to
- non-SUBREG expression. We can't do this later, since the information
- about inner mode may be lost. */
- if (rtx_equal_p (SUBREG_REG (x), from))
- {
- rtx temp;
- temp = simplify_subreg (GET_MODE (x), to,
- GET_MODE (to) != VOIDmode
- ? GET_MODE (to) : GET_MODE (SUBREG_REG (x)),
- SUBREG_BYTE (x));
- if (temp)
- {
- validate_change (object, loc, temp, 1);
- return;
- }
- /* Avoid creating of invalid SUBREGS. */
- if (GET_MODE (from) == VOIDmode)
- {
- /* Substitute in something that we know won't be
- recognized. */
- to = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
- validate_change (object, loc, to, 1);
- return;
- }
- }
+ /* All subregs possible to simplify should be simplified. */
+ new = simplify_subreg (GET_MODE (x), SUBREG_REG (x), op0_mode,
+ SUBREG_BYTE (x));
+
+ /* Subregs of VOIDmode operands are incorect. */
+ if (!new && GET_MODE (SUBREG_REG (x)) == VOIDmode)
+ new = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ if (new)
+ validate_change (object, loc, new, 1);
break;
-
case ZERO_EXTRACT:
case SIGN_EXTRACT:
/* If we are replacing a register with memory, try to change the memory
- to be the mode required for memory in extract operations (this isn't
- likely to be an insertion operation; if it was, nothing bad will
- happen, we might just fail in some cases). */
+ to be the mode required for memory in extract operations (this isn't
+ likely to be an insertion operation; if it was, nothing bad will
+ happen, we might just fail in some cases). */
- if (GET_CODE (from) == REG && GET_CODE (to) == MEM
- && rtx_equal_p (XEXP (x, 0), from)
+ if (GET_CODE (XEXP (x, 0)) == MEM
&& GET_CODE (XEXP (x, 1)) == CONST_INT
&& GET_CODE (XEXP (x, 2)) == CONST_INT
- && ! mode_dependent_address_p (XEXP (to, 0))
- && ! MEM_VOLATILE_P (to))
+ && !mode_dependent_address_p (XEXP (XEXP (x, 0), 0))
+ && !MEM_VOLATILE_P (XEXP (x, 0)))
{
enum machine_mode wanted_mode = VOIDmode;
- enum machine_mode is_mode = GET_MODE (to);
+ enum machine_mode is_mode = GET_MODE (XEXP (x, 0));
int pos = INTVAL (XEXP (x, 2));
#ifdef HAVE_extzv
rtx newmem;
/* If the bytes and bits are counted differently, we
- must adjust the offset. */
+ must adjust the offset. */
if (BYTES_BIG_ENDIAN != BITS_BIG_ENDIAN)
- offset = (GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (wanted_mode)
- - offset);
+ offset =
+ (GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (wanted_mode) -
+ offset);
pos %= GET_MODE_BITSIZE (wanted_mode);
newmem = gen_rtx_MEM (wanted_mode,
- plus_constant (XEXP (to, 0), offset));
- MEM_COPY_ATTRIBUTES (newmem, to);
+ plus_constant (XEXP (XEXP (x, 0), 0),
+ offset));
+ MEM_COPY_ATTRIBUTES (newmem, XEXP (x, 0));
validate_change (object, &XEXP (x, 2), GEN_INT (pos), 1);
validate_change (object, &XEXP (x, 0), newmem, 1);
}
break;
-
+
default:
break;
}
-
- /* For commutative or comparison operations we've already performed
- replacements. Don't try to perform them again. */
- if (GET_RTX_CLASS (code) != '<' && GET_RTX_CLASS (code) != 'c')
- {
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- if (fmt[i] == 'e')
- validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
- else if (fmt[i] == 'E')
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
- }
- }
}
/* Try replacing every occurrence of FROM in subexpression LOC of INSN
&& GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (op))))
return 0;
#endif
+ /* Avoid memories with nonzero SUBREG_BYTE, as offsetting the memory
+ may result in incorrect reference. We should simplify all valid
+ subregs of MEM anyway. */
+ if (SUBREG_BYTE (op) && GET_CODE (SUBREG_REG (op)) == MEM)
+ return 0;
op = SUBREG_REG (op);
code = GET_CODE (op);
projects / platform / upstream / linaro-gcc.git / commitdiff