adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.
This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.
This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
lock_acquire+0x6c/0x90
drm_modeset_acquire_init+0xf4/0x150
drmm_mode_config_init+0x220/0x770
msm_drm_bind+0x13c/0x654
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x174
component_add+0x18/0x2c
dsi_dev_attach+0x24/0x30
dsi_host_attach+0x98/0x14c
devm_mipi_dsi_attach+0x38/0xb0
adv7533_attach_dsi+0x8c/0x110
adv7511_probe+0x5a0/0x930
i2c_device_probe+0x30c/0x350
really_probe.part.0+0x9c/0x2b0
__driver_probe_device+0x98/0x144
driver_probe_device+0xac/0x14c
__device_attach_driver+0xbc/0x124
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x90/0xd0
process_one_work+0x28c/0x6b0
worker_thread+0x240/0x444
kthread+0x110/0x114
ret_from_fork+0x10/0x20
-> #0 (component_mutex){+.+.}-{3:3}:
__lock_acquire+0x1280/0x20ac
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x6c/0x90
__mutex_lock+0x84/0x400
mutex_lock_nested+0x3c/0x70
component_del+0x34/0x170
dsi_dev_detach+0x24/0x30
dsi_host_detach+0x20/0x64
mipi_dsi_detach+0x2c/0x40
adv7533_mode_set+0x64/0x90
adv7511_bridge_mode_set+0x210/0x214
drm_bridge_chain_mode_set+0x5c/0x84
crtc_set_mode+0x18c/0x1dc
drm_atomic_helper_commit_modeset_disables+0x40/0x50
msm_atomic_commit_tail+0x1d0/0x6e0
commit_tail+0xa4/0x180
drm_atomic_helper_commit+0x178/0x3b0
drm_atomic_commit+0xa4/0xe0
drm_client_modeset_commit_atomic+0x228/0x284
drm_client_modeset_commit_locked+0x64/0x1d0
drm_client_modeset_commit+0x34/0x60
drm_fb_helper_lastclose+0x74/0xcc
drm_lastclose+0x3c/0x80
drm_release+0xfc/0x114
__fput+0x70/0x224
____fput+0x14/0x20
task_work_run+0x88/0x1a0
do_exit+0x350/0xa50
do_group_exit+0x38/0xa4
__wake_up_parent+0x0/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x30/0xc0
el0_svc+0x58/0x100
el0t_64_sync_handler+0x1b0/0x1bc
el0t_64_sync+0x18c/0x190
Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.
This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.
changes since RFC:
- Fix commit text and add TODO comment
changes in v2:
- Fix checkpatch formatting errors
Fixes:
62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com
void adv7533_dsi_power_on(struct adv7511 *adv);
void adv7533_dsi_power_off(struct adv7511 *adv);
-void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
+enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
+ const struct drm_display_mode *mode);
int adv7533_patch_registers(struct adv7511 *adv);
int adv7533_patch_cec_registers(struct adv7511 *adv);
int adv7533_attach_dsi(struct adv7511 *adv);
}
static enum drm_mode_status adv7511_mode_valid(struct adv7511 *adv7511,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
regmap_update_bits(adv7511->regmap, 0x17,
0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
- if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
- adv7533_mode_set(adv7511, adj_mode);
-
drm_mode_copy(&adv7511->curr_mode, adj_mode);
/*
adv7511_mode_set(adv, mode, adj_mode);
}
+static enum drm_mode_status adv7511_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+ if (adv->type == ADV7533 || adv->type == ADV7535)
+ return adv7533_mode_valid(adv, mode);
+ else
+ return adv7511_mode_valid(adv, mode);
+}
+
static int adv7511_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
.enable = adv7511_bridge_enable,
.disable = adv7511_bridge_disable,
.mode_set = adv7511_bridge_mode_set,
+ .mode_valid = adv7511_bridge_mode_valid,
.attach = adv7511_bridge_attach,
.detect = adv7511_bridge_detect,
.get_edid = adv7511_bridge_get_edid,
regmap_write(adv->regmap_cec, 0x27, 0x0b);
}
-void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode)
+enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
+ const struct drm_display_mode *mode)
{
+ int lanes;
struct mipi_dsi_device *dsi = adv->dsi;
- int lanes, ret;
-
- if (adv->num_dsi_lanes != 4)
- return;
if (mode->clock > 80000)
lanes = 4;
else
lanes = 3;
- if (lanes != dsi->lanes) {
- mipi_dsi_detach(dsi);
- dsi->lanes = lanes;
- ret = mipi_dsi_attach(dsi);
- if (ret)
- dev_err(&dsi->dev, "failed to change host lanes\n");
- }
+ /*
+ * TODO: add support for dynamic switching of lanes
+ * by using the bridge pre_enable() op . Till then filter
+ * out the modes which shall need different number of lanes
+ * than what was configured in the device tree.
+ */
+ if (lanes != dsi->lanes)
+ return MODE_BAD;
+
+ return MODE_OK;
}
int adv7533_patch_registers(struct adv7511 *adv)
projects / platform / kernel / linux-rpi.git / commitdiff