mtd: lantiq: Add NAND support on Lantiq XWAY SoC.
authorJohn Crispin <blogic@openwrt.org>
Thu, 23 Aug 2012 18:28:32 +0000 (20:28 +0200)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Sat, 29 Sep 2012 14:05:18 +0000 (15:05 +0100)
The driver uses plat_nand. As the platform_device is loaded from DT, we need
to lookup the node and attach our xway specific "struct platform_nand_data"
to it.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/nand/Kconfig
drivers/mtd/nand/Makefile
drivers/mtd/nand/xway_nand.c [new file with mode: 0644]

index 7101e8a..ce5cf02 100644 (file)
@@ -580,4 +580,12 @@ config MTD_NAND_FSMC
          Enables support for NAND Flash chips on the ST Microelectronics
          Flexible Static Memory Controller (FSMC)
 
+config MTD_NAND_XWAY
+       tristate "Support for NAND on Lantiq XWAY SoC"
+       depends on LANTIQ && SOC_TYPE_XWAY
+       select MTD_NAND_PLATFORM
+       help
+         Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+         to the External Bus Unit (EBU).
+
 endif # MTD_NAND
index ddee818..c4b0ab3 100644 (file)
@@ -53,5 +53,6 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC)    += mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)           += r852.o
 obj-$(CONFIG_MTD_NAND_JZ4740)          += jz4740_nand.o
 obj-$(CONFIG_MTD_NAND_GPMI_NAND)       += gpmi-nand/
+obj-$(CONFIG_MTD_NAND_XWAY)            += xway_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
new file mode 100644 (file)
index 0000000..3f81dc8
--- /dev/null
@@ -0,0 +1,201 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright © 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+/* nand registers */
+#define EBU_ADDSEL1            0x24
+#define EBU_NAND_CON           0xB0
+#define EBU_NAND_WAIT          0xB4
+#define EBU_NAND_ECC0          0xB8
+#define EBU_NAND_ECC_AC                0xBC
+
+/* nand commands */
+#define NAND_CMD_ALE           (1 << 2)
+#define NAND_CMD_CLE           (1 << 3)
+#define NAND_CMD_CS            (1 << 4)
+#define NAND_WRITE_CMD_RESET   0xff
+#define NAND_WRITE_CMD         (NAND_CMD_CS | NAND_CMD_CLE)
+#define NAND_WRITE_ADDR                (NAND_CMD_CS | NAND_CMD_ALE)
+#define NAND_WRITE_DATA                (NAND_CMD_CS)
+#define NAND_READ_DATA         (NAND_CMD_CS)
+#define NAND_WAIT_WR_C         (1 << 3)
+#define NAND_WAIT_RD           (0x1)
+
+/* we need to tel the ebu which addr we mapped the nand to */
+#define ADDSEL1_MASK(x)                (x << 4)
+#define ADDSEL1_REGEN          1
+
+/* we need to tell the EBU that we have nand attached and set it up properly */
+#define BUSCON1_SETUP          (1 << 22)
+#define BUSCON1_BCGEN_RES      (0x3 << 12)
+#define BUSCON1_WAITWRC2       (2 << 8)
+#define BUSCON1_WAITRDC2       (2 << 6)
+#define BUSCON1_HOLDC1         (1 << 4)
+#define BUSCON1_RECOVC1                (1 << 2)
+#define BUSCON1_CMULT4         1
+
+#define NAND_CON_CE            (1 << 20)
+#define NAND_CON_OUT_CS1       (1 << 10)
+#define NAND_CON_IN_CS1                (1 << 8)
+#define NAND_CON_PRE_P         (1 << 7)
+#define NAND_CON_WP_P          (1 << 6)
+#define NAND_CON_SE_P          (1 << 5)
+#define NAND_CON_CS_P          (1 << 4)
+#define NAND_CON_CSMUX         (1 << 1)
+#define NAND_CON_NANDM         1
+
+static void xway_reset_chip(struct nand_chip *chip)
+{
+       unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+       unsigned long flags;
+
+       nandaddr &= ~NAND_WRITE_ADDR;
+       nandaddr |= NAND_WRITE_CMD;
+
+       /* finish with a reset */
+       spin_lock_irqsave(&ebu_lock, flags);
+       writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+       while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+               ;
+       spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void xway_select_chip(struct mtd_info *mtd, int chip)
+{
+
+       switch (chip) {
+       case -1:
+               ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+               ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
+               break;
+       case 0:
+               ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+               ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
+               break;
+       default:
+               BUG();
+       }
+}
+
+static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+       struct nand_chip *this = mtd->priv;
+       unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+       unsigned long flags;
+
+       if (ctrl & NAND_CTRL_CHANGE) {
+               nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+               if (ctrl & NAND_CLE)
+                       nandaddr |= NAND_WRITE_CMD;
+               else
+                       nandaddr |= NAND_WRITE_ADDR;
+               this->IO_ADDR_W = (void __iomem *) nandaddr;
+       }
+
+       if (cmd != NAND_CMD_NONE) {
+               spin_lock_irqsave(&ebu_lock, flags);
+               writeb(cmd, this->IO_ADDR_W);
+               while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+                       ;
+               spin_unlock_irqrestore(&ebu_lock, flags);
+       }
+}
+
+static int xway_dev_ready(struct mtd_info *mtd)
+{
+       return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
+}
+
+static unsigned char xway_read_byte(struct mtd_info *mtd)
+{
+       struct nand_chip *this = mtd->priv;
+       unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
+       unsigned long flags;
+       int ret;
+
+       spin_lock_irqsave(&ebu_lock, flags);
+       ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
+       spin_unlock_irqrestore(&ebu_lock, flags);
+
+       return ret;
+}
+
+static int xway_nand_probe(struct platform_device *pdev)
+{
+       struct nand_chip *this = platform_get_drvdata(pdev);
+       unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+       const __be32 *cs = of_get_property(pdev->dev.of_node,
+                                       "lantiq,cs", NULL);
+       u32 cs_flag = 0;
+
+       /* load our CS from the DT. Either we find a valid 1 or default to 0 */
+       if (cs && (*cs == 1))
+               cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+
+       /* setup the EBU to run in NAND mode on our base addr */
+       ltq_ebu_w32(CPHYSADDR(nandaddr)
+               | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+
+       ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
+               | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
+               | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
+
+       ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
+               | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
+               | cs_flag, EBU_NAND_CON);
+
+       /* finish with a reset */
+       xway_reset_chip(this);
+
+       return 0;
+}
+
+/* allow users to override the partition in DT using the cmdline */
+static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL };
+
+static struct platform_nand_data xway_nand_data = {
+       .chip = {
+               .nr_chips               = 1,
+               .chip_delay             = 30,
+               .part_probe_types       = part_probes,
+       },
+       .ctrl = {
+               .probe          = xway_nand_probe,
+               .cmd_ctrl       = xway_cmd_ctrl,
+               .dev_ready      = xway_dev_ready,
+               .select_chip    = xway_select_chip,
+               .read_byte      = xway_read_byte,
+       }
+};
+
+/*
+ * Try to find the node inside the DT. If it is available attach out
+ * platform_nand_data
+ */
+static int __init xway_register_nand(void)
+{
+       struct device_node *node;
+       struct platform_device *pdev;
+
+       node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
+       if (!node)
+               return -ENOENT;
+       pdev = of_find_device_by_node(node);
+       if (!pdev)
+               return -EINVAL;
+       pdev->dev.platform_data = &xway_nand_data;
+       of_node_put(node);
+       return 0;
+}
+
+subsys_initcall(xway_register_nand);