PARAMS ((bfd *, struct bfd_link_info *));
boolean bfd_elf32_arm_process_before_allocation
PARAMS ((bfd *, struct bfd_link_info *, int));
+static enum elf_reloc_type_class elf32_arm_reloc_type_class
+ PARAMS ((int));
+
#define INTERWORK_FLAG(abfd) (elf_elfheader (abfd)->e_flags & EF_ARM_INTERWORK)
/* The linker script knows the section names for placement.
/* Subsequent entries in a procedure linkage table look like
this. */
static const unsigned long elf32_arm_plt_entry [PLT_ENTRY_SIZE / 4] =
- {
+ {
0xe59fc004, /* ldr ip, [pc, #4] */
0xe08fc00c, /* add ip, pc, ip */
0xe59cf000, /* ldr pc, [ip] */
/* If the start address has been set, then set the EF_ARM_HASENTRY
flag. Setting this more than once is redundant, but the cost is
not too high, and it keeps the code simple.
-
+
The test is done here, rather than somewhere else, because the
start address is only set just before the final link commences.
flag will not be set. */
if (bfd_get_start_address (output_bfd) != 0)
elf_elfheader (output_bfd)->e_flags |= EF_ARM_HASENTRY;
-
+
globals = elf32_arm_hash_table (info);
dynobj = elf_hash_table (info)->dynobj;
into the output file to be resolved at run time. */
if (info->shared
&& (r_type != R_ARM_PC24
- || (h != NULL
+ || (h != NULL
&& h->dynindx != -1
&& (! info->symbolic
|| (h->elf_link_hash_flags
corresponding bit one in the target address will be set from bit
one of the source address. */
lower_insn &= ~1;
-#endif
+#endif
/* Put the relocated value back in the object file: */
bfd_put_16 (input_bfd, upper_insn, hit_data);
bfd_put_16 (input_bfd, lower_insn, hit_data + 2);
calculation. */
value -= sgot->output_section->vma;
return _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset, value,
- (bfd_vma) 0);
+ contents, rel->r_offset, value,
+ (bfd_vma) 0);
case R_ARM_GOTPC:
/* Use global offset table as symbol value. */
value = sgot->output_section->vma;
return _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset, value,
- (bfd_vma) 0);
+ contents, rel->r_offset, value,
+ (bfd_vma) 0);
case R_ARM_GOT32:
/* Relocation is to the entry for this symbol in the
}
return _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset, value,
- (bfd_vma) 0);
+ contents, rel->r_offset, value,
+ (bfd_vma) 0);
case R_ARM_PLT32:
/* Relocation is to the entry for this symbol in the
without using the procedure linkage table. */
if (h == NULL)
return _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset, value,
- (bfd_vma) 0);
+ contents, rel->r_offset, value,
+ (bfd_vma) 0);
if (h->plt.offset == (bfd_vma) -1)
/* We didn't make a PLT entry for this symbol. This
+ splt->output_offset
+ h->plt.offset);
return _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset, value,
- (bfd_vma) 0);
+ contents, rel->r_offset, value,
+ (bfd_vma) 0);
case R_ARM_SBREL32:
return bfd_reloc_notsupported;
case R_ARM_ABS32:
if (info->shared
&& (
- (!info->symbolic && h->dynindx != -1)
+ (!info->symbolic && h->dynindx != -1)
|| (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0
)
&& ((input_section->flags & SEC_ALLOC) != 0
if (flags & EF_ARM_MAPSYMSFIRST)
fprintf (file, _(" [mapping symbols precede others]"));
- flags &= ~(EF_ARM_SYMSARESORTED | EF_ARM_DYNSYMSUSESEGIDX
+ flags &= ~(EF_ARM_SYMSARESORTED | EF_ARM_DYNSYMSUSESEGIDX
| EF_ARM_MAPSYMSFIRST);
break;
srelgot = bfd_make_section (dynobj, ".rel.got");
if (srelgot == NULL
|| ! bfd_set_section_flags (dynobj, srelgot,
- (SEC_ALLOC
+ (SEC_ALLOC
| SEC_LOAD
| SEC_HAS_CONTENTS
| SEC_IN_MEMORY
}
else
{
- /* This is a global offset table entry for a local
+ /* This is a global offset table entry for a local
symbol. */
if (local_got_offsets == NULL)
{
sgot->_raw_size += 4;
break;
- case R_ARM_PLT32:
+ case R_ARM_PLT32:
/* This symbol requires a procedure linkage table entry. We
actually build the entry in adjust_dynamic_symbol,
because this might be a case of linking PIC code which is
return false;
BFD_ASSERT (strncmp (name, ".rel", 4) == 0
- && strcmp (bfd_get_section_name (abfd, sec),
+ && strcmp (bfd_get_section_name (abfd, sec),
name + 4) == 0);
sreloc = bfd_get_section_by_name (dynobj, name);
|| ! bfd_set_section_alignment (dynobj, sreloc, 2))
return false;
}
+ if (sec->flags & SEC_READONLY)
+ info->flags |= DF_TEXTREL;
}
sreloc->_raw_size += sizeof (Elf32_External_Rel);
static boolean
elf32_arm_size_dynamic_sections (output_bfd, info)
- bfd * output_bfd;
+ bfd * output_bfd ATTRIBUTE_UNUSED;
struct bfd_link_info * info;
{
bfd * dynobj;
asection * s;
boolean plt;
boolean relocs;
- boolean reltext;
dynobj = elf_hash_table (info)->dynobj;
BFD_ASSERT (dynobj != NULL);
memory for them. */
plt = false;
relocs = false;
- reltext = false;
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char * name;
}
else
{
- asection * target;
-
/* Remember whether there are any reloc sections other
than .rel.plt. */
if (strcmp (name, ".rel.plt") != 0)
- {
- const char *outname;
-
- relocs = true;
-
- /* If this relocation section applies to a read only
- section, then we probably need a DT_TEXTREL
- entry. The entries in the .rel.plt section
- really apply to the .got section, which we
- created ourselves and so know is not readonly. */
- outname = bfd_get_section_name (output_bfd,
- s->output_section);
- target = bfd_get_section_by_name (output_bfd, outname + 4);
-
- if (target != NULL
- && (target->flags & SEC_READONLY) != 0
- && (target->flags & SEC_ALLOC) != 0)
- reltext = true;
- }
+ relocs = true;
/* We use the reloc_count field as a counter if we need
to copy relocs into the output file. */
return false;
}
- if (reltext)
+ if ((info->flags & DF_TEXTREL) != 0)
{
if (! bfd_elf32_add_dynamic_entry (info, DT_TEXTREL, 0))
return false;
i_ehdrp->e_ident[EI_ABIVERSION] = ARM_ELF_ABI_VERSION;
}
+static enum elf_reloc_type_class
+elf32_arm_reloc_type_class (type)
+ int type;
+{
+ switch (type)
+ {
+ case R_ARM_RELATIVE:
+ return reloc_class_relative;
+ case R_ARM_JUMP_SLOT:
+ return reloc_class_plt;
+ case R_ARM_COPY:
+ return reloc_class_copy;
+ default:
+ return reloc_class_normal;
+ }
+}
+
+
#define ELF_ARCH bfd_arch_arm
#define ELF_MACHINE_CODE EM_ARM
#define ELF_MAXPAGESIZE 0x8000
-#define bfd_elf32_bfd_copy_private_bfd_data elf32_arm_copy_private_bfd_data
-#define bfd_elf32_bfd_merge_private_bfd_data elf32_arm_merge_private_bfd_data
+#define bfd_elf32_bfd_copy_private_bfd_data elf32_arm_copy_private_bfd_data
+#define bfd_elf32_bfd_merge_private_bfd_data elf32_arm_merge_private_bfd_data
#define bfd_elf32_bfd_set_private_flags elf32_arm_set_private_flags
#define bfd_elf32_bfd_print_private_bfd_data elf32_arm_print_private_bfd_data
#define bfd_elf32_bfd_link_hash_table_create elf32_arm_link_hash_table_create
-#define bfd_elf32_bfd_reloc_type_lookup elf32_arm_reloc_type_lookup
+#define bfd_elf32_bfd_reloc_type_lookup elf32_arm_reloc_type_lookup
#define bfd_elf32_find_nearest_line elf32_arm_find_nearest_line
#define elf_backend_get_symbol_type elf32_arm_get_symbol_type
#define elf_backend_gc_mark_hook elf32_arm_gc_mark_hook
#define elf_backend_gc_sweep_hook elf32_arm_gc_sweep_hook
#define elf_backend_check_relocs elf32_arm_check_relocs
-#define elf_backend_relocate_section elf32_arm_relocate_section
+#define elf_backend_relocate_section elf32_arm_relocate_section
#define elf_backend_adjust_dynamic_symbol elf32_arm_adjust_dynamic_symbol
#define elf_backend_create_dynamic_sections _bfd_elf_create_dynamic_sections
#define elf_backend_finish_dynamic_symbol elf32_arm_finish_dynamic_symbol
#define elf_backend_finish_dynamic_sections elf32_arm_finish_dynamic_sections
#define elf_backend_size_dynamic_sections elf32_arm_size_dynamic_sections
#define elf_backend_post_process_headers elf32_arm_post_process_headers
+#define elf_backend_reloc_type_class elf32_arm_reloc_type_class
#define elf_backend_can_gc_sections 1
#define elf_backend_plt_readonly 1
PARAMS ((bfd *, struct bfd_link_info *));
static void elf_cris_hide_symbol
PARAMS ((struct bfd_link_info *, struct elf_link_hash_entry *));
+static enum elf_reloc_type_class elf_cris_reloc_type_class
+ PARAMS ((int));
static reloc_howto_type cris_elf_howto_table [] =
{
|| !bfd_set_section_alignment (dynobj, sreloc, 2))
return false;
}
+ if (sec->flags & SEC_READONLY)
+ info->flags |= DF_TEXTREL;
}
sreloc->_raw_size += sizeof (Elf32_External_Rela);
static boolean
elf_cris_size_dynamic_sections (output_bfd, info)
- bfd *output_bfd;
+ bfd *output_bfd ATTRIBUTE_UNUSED;
struct bfd_link_info *info;
{
bfd *dynobj;
asection *s;
boolean plt;
boolean relocs;
- boolean reltext;
dynobj = elf_hash_table (info)->dynobj;
BFD_ASSERT (dynobj != NULL);
memory for them. */
plt = false;
relocs = false;
- reltext = false;
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
}
else
{
- asection *target;
-
/* Remember whether there are any reloc sections other
than .rela.plt. */
if (strcmp (name, ".rela.plt") != 0)
- {
- const char *outname;
-
relocs = true;
- /* If this relocation section applies to a read only
- section, then we probably need a DT_TEXTREL entry.
- The entries in the .rela.plt section are actually
- associated with .got.plt, which we created ourselves
- and so know is not readonly. */
- outname = bfd_get_section_name (output_bfd,
- s->output_section);
- target
- = bfd_get_section_by_name (output_bfd,
- outname + strlen (".rela"));
-
- /* We have to test the .text section by name, becase for
- some reason it does not have SEC_READONLY set at this
- time. That flag is actually set in ldmain.c:main
- specifically for ".text" at a time long after this
- function is called. FIXME: This might be due to a
- general bug. FIXME: Have testcase for this. */
- if (target != NULL
- && (target->flags & SEC_ALLOC) != 0
- && ((target->flags & SEC_READONLY) != 0
- || strcmp (outname + strlen (".rela"),
- ".text") == 0))
- reltext = true;
- }
-
/* We use the reloc_count field as a counter if we need
to copy relocs into the output file. */
s->reloc_count = 0;
return false;
}
- if (reltext)
+ if ((info->flags & DF_TEXTREL) != 0)
{
if (!bfd_elf32_add_dynamic_entry (info, DT_TEXTREL, 0))
return false;
return true;
}
+
+
+static enum elf_reloc_type_class
+elf_cris_reloc_type_class (type)
+ int type;
+{
+ switch (type)
+ {
+ case R_CRIS_RELATIVE:
+ return reloc_class_relative;
+ case R_CRIS_JUMP_SLOT:
+ return reloc_class_plt;
+ case R_CRIS_COPY:
+ return reloc_class_copy;
+ default:
+ return reloc_class_normal;
+ }
+}
\f
#define ELF_ARCH bfd_arch_cris
#define ELF_MACHINE_CODE EM_CRIS
#define bfd_elf32_bfd_final_link \
_bfd_elf32_gc_common_final_link
#define elf_backend_hide_symbol elf_cris_hide_symbol
+#define elf_backend_reloc_type_class elf_cris_reloc_type_class
#define elf_backend_want_got_plt 1
#define elf_backend_plt_readonly 1
static boolean sh_elf_gc_sweep_hook
PARAMS ((bfd *, struct bfd_link_info *, asection *,
const Elf_Internal_Rela *));
+static enum elf_reloc_type_class sh_elf_reloc_type_class
+ PARAMS ((int));
/* The name of the dynamic interpreter. This is put in the .interp
section. */
}
/* Get the address from which the register is being loaded. The
- displacement in the mov.l instruction is quadrupled. It is a
- displacement from four bytes after the movl instruction, but,
- before adding in the PC address, two least significant bits
- of the PC are cleared. We assume that the section is aligned
- on a four byte boundary. */
+ displacement in the mov.l instruction is quadrupled. It is a
+ displacement from four bytes after the movl instruction, but,
+ before adding in the PC address, two least significant bits
+ of the PC are cleared. We assume that the section is aligned
+ on a four byte boundary. */
paddr = insn & 0xff;
paddr *= 4;
paddr += (laddr + 4) & ~3;
static boolean
sh_elf_size_dynamic_sections (output_bfd, info)
- bfd *output_bfd;
+ bfd *output_bfd ATTRIBUTE_UNUSED;
struct bfd_link_info *info;
{
bfd *dynobj;
asection *s;
boolean plt;
boolean relocs;
- boolean reltext;
dynobj = elf_hash_table (info)->dynobj;
BFD_ASSERT (dynobj != NULL);
memory for them. */
plt = false;
relocs = false;
- reltext = false;
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
}
else
{
- asection *target;
-
/* Remember whether there are any reloc sections other
than .rela.plt. */
if (strcmp (name, ".rela.plt") != 0)
- {
- const char *outname;
-
- relocs = true;
-
- /* If this relocation section applies to a read only
- section, then we probably need a DT_TEXTREL
- entry. The entries in the .rela.plt section
- really apply to the .got section, which we
- created ourselves and so know is not readonly. */
- outname = bfd_get_section_name (output_bfd,
- s->output_section);
- target = bfd_get_section_by_name (output_bfd, outname + 5);
- if (target != NULL
- && (target->flags & SEC_READONLY) != 0
- && (target->flags & SEC_ALLOC) != 0)
- reltext = true;
- }
+ relocs = true;
/* We use the reloc_count field as a counter if we need
to copy relocs into the output file. */
return false;
}
- if (reltext)
+ if ((info->flags & DF_TEXTREL) != 0)
{
if (! bfd_elf32_add_dynamic_entry (info, DT_TEXTREL, 0))
return false;
|| ! bfd_set_section_alignment (dynobj, sreloc, 2))
return false;
}
+ if (sec->flags & SEC_READONLY)
+ info->flags |= DF_TEXTREL;
}
sreloc->_raw_size += sizeof (Elf32_External_Rela);
return true;
}
+static enum elf_reloc_type_class
+sh_elf_reloc_type_class (type)
+ int type;
+{
+ switch (type)
+ {
+ case R_SH_RELATIVE:
+ return reloc_class_relative;
+ case R_SH_JMP_SLOT:
+ return reloc_class_plt;
+ case R_SH_COPY:
+ return reloc_class_copy;
+ default:
+ return reloc_class_normal;
+ }
+}
+
#ifndef ELF_ARCH
#define TARGET_BIG_SYM bfd_elf32_sh_vec
#define TARGET_BIG_NAME "elf32-sh"
sh_elf_finish_dynamic_symbol
#define elf_backend_finish_dynamic_sections \
sh_elf_finish_dynamic_sections
+#define elf_backend_reloc_type_class sh_elf_reloc_type_class
#define elf_backend_want_got_plt 1
#define elf_backend_plt_readonly 1
projects / external / binutils.git / commitdiff