Once again, method 3 should be avoided wherever possible. Explicit device
instantiation (methods 1 and 2) is much preferred for it is safer and
faster.
+
+
+Method 4: Instantiate from user-space
+-------------------------------------
+
+In general, the kernel should know which I2C devices are connected and
+what addresses they live at. However, in certain cases, it does not, so a
+sysfs interface was added to let the user provide the information. This
+interface is made of 2 attribute files which are created in every I2C bus
+directory: new_device and delete_device. Both files are write only and you
+must write the right parameters to them in order to properly instantiate,
+respectively delete, an I2C device.
+
+File new_device takes 2 parameters: the name of the I2C device (a string)
+and the address of the I2C device (a number, typically expressed in
+hexadecimal starting with 0x, but can also be expressed in decimal.)
+
+File delete_device takes a single parameter: the address of the I2C
+device. As no two devices can live at the same address on a given I2C
+segment, the address is sufficient to uniquely identify the device to be
+deleted.
+
+Example:
+# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+
+While this interface should only be used when in-kernel device declaration
+can't be done, there is a variety of cases where it can be helpful:
+* The I2C driver usually detects devices (method 3 above) but the bus
+ segment your device lives on doesn't have the proper class bit set and
+ thus detection doesn't trigger.
+* The I2C driver usually detects devices, but your device lives at an
+ unexpected address.
+* The I2C driver usually detects devices, but your device is not detected,
+ either because the detection routine is too strict, or because your
+ device is not officially supported yet but you know it is compatible.
+* You are developing a driver on a test board, where you soldered the I2C
+ device yourself.
+
+This interface is a replacement for the force_* module parameters some I2C
+drivers implement. Being implemented in i2c-core rather than in each
+device driver individually, it is much more efficient, and also has the
+advantage that you do not have to reload the driver to change a setting.
+You can also instantiate the device before the driver is loaded or even
+available, and you don't need to know what driver the device needs.
#include "i2c-core.h"
-/* core_lock protects i2c_adapter_idr, and guarantees
+/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
that device detection, deletion of detected devices, and attach_adapter
and detach_adapter calls are serialized */
static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
+static LIST_HEAD(userspace_devices);
static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
return sprintf(buf, "%s\n", adap->name);
}
+/*
+ * Let users instantiate I2C devices through sysfs. This can be used when
+ * platform initialization code doesn't contain the proper data for
+ * whatever reason. Also useful for drivers that do device detection and
+ * detection fails, either because the device uses an unexpected address,
+ * or this is a compatible device with different ID register values.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to provide incorrect parameters.
+ */
+static ssize_t
+i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ struct i2c_board_info info;
+ struct i2c_client *client;
+ char *blank, end;
+ int res;
+
+ dev_warn(dev, "The new_device interface is still experimental "
+ "and may change in a near future\n");
+ memset(&info, 0, sizeof(struct i2c_board_info));
+
+ blank = strchr(buf, ' ');
+ if (!blank) {
+ dev_err(dev, "%s: Missing parameters\n", "new_device");
+ return -EINVAL;
+ }
+ if (blank - buf > I2C_NAME_SIZE - 1) {
+ dev_err(dev, "%s: Invalid device name\n", "new_device");
+ return -EINVAL;
+ }
+ memcpy(info.type, buf, blank - buf);
+
+ /* Parse remaining parameters, reject extra parameters */
+ res = sscanf(++blank, "%hi%c", &info.addr, &end);
+ if (res < 1) {
+ dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
+ return -EINVAL;
+ }
+ if (res > 1 && end != '\n') {
+ dev_err(dev, "%s: Extra parameters\n", "new_device");
+ return -EINVAL;
+ }
+
+ if (info.addr < 0x03 || info.addr > 0x77) {
+ dev_err(dev, "%s: Invalid I2C address 0x%hx\n", "new_device",
+ info.addr);
+ return -EINVAL;
+ }
+
+ client = i2c_new_device(adap, &info);
+ if (!client)
+ return -EEXIST;
+
+ /* Keep track of the added device */
+ mutex_lock(&core_lock);
+ list_add_tail(&client->detected, &userspace_devices);
+ mutex_unlock(&core_lock);
+ dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
+ info.type, info.addr);
+
+ return count;
+}
+
+/*
+ * And of course let the users delete the devices they instantiated, if
+ * they got it wrong. This interface can only be used to delete devices
+ * instantiated by i2c_sysfs_new_device above. This guarantees that we
+ * don't delete devices to which some kernel code still has references.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to delete the wrong device.
+ */
+static ssize_t
+i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ struct i2c_client *client, *next;
+ unsigned short addr;
+ char end;
+ int res;
+
+ /* Parse parameters, reject extra parameters */
+ res = sscanf(buf, "%hi%c", &addr, &end);
+ if (res < 1) {
+ dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
+ return -EINVAL;
+ }
+ if (res > 1 && end != '\n') {
+ dev_err(dev, "%s: Extra parameters\n", "delete_device");
+ return -EINVAL;
+ }
+
+ /* Make sure the device was added through sysfs */
+ res = -ENOENT;
+ mutex_lock(&core_lock);
+ list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+ if (client->addr == addr && client->adapter == adap) {
+ dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
+ "delete_device", client->name, client->addr);
+
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ res = count;
+ break;
+ }
+ }
+ mutex_unlock(&core_lock);
+
+ if (res < 0)
+ dev_err(dev, "%s: Can't find device in list\n",
+ "delete_device");
+ return res;
+}
+
static struct device_attribute i2c_adapter_attrs[] = {
__ATTR(name, S_IRUGO, show_adapter_name, NULL),
+ __ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device),
+ __ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device),
{ },
};
projects / platform / kernel / linux-3.10.git / commitdiff