[PATCH] radeonfb sleep fixes
authorVolker Braun <vbraun@physics.upenn.edu>
Sun, 30 Jul 2006 10:04:18 +0000 (03:04 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Mon, 31 Jul 2006 20:28:45 +0000 (13:28 -0700)
Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw
too much power when suspended to RAM, reducing drastically the battery
lifetime.  The solution is to enable suspend-to-D2 on these machines.  They
are whitelisted through their subsystem vendor/device ID.  This fixes
http://bugzilla.kernel.org/show_bug.cgi?id=3022

The patch introduces a framework to alter the pm_mode and reinit_func fields
of the radeonfb_info structure based on a whitelist.  This should facilitate
future hardware-dependent workarounds.  The workaround for the Samsung P35
that is already in the radeonfb code has been rewritten using this framework.

The behavior can be overridden with module options:

i)  video=radeonfb:force_sleep=1
    enable suspend-to-D2 also on non-whitelisted machines (useful for
    testing new notebook models),

ii) video=radeonfb:ignore_devlist=1
    Disable checking the whitelist and do not apply any workarounds.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/video/aty/radeon_base.c
drivers/video/aty/radeon_pm.c
drivers/video/aty/radeonfb.h

index 8d85fc5..8e3400d 100644 (file)
@@ -266,6 +266,8 @@ static int force_measure_pll = 0;
 #ifdef CONFIG_MTRR
 static int nomtrr = 0;
 #endif
+static int force_sleep;
+static int ignore_devlist;
 
 /*
  * prototypes
@@ -2327,9 +2329,9 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
                /* -2 is special: means  ON on mobility chips and do not
                 * change on others
                 */
-               radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1);
+               radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1, ignore_devlist, force_sleep);
        } else
-               radeonfb_pm_init(rinfo, default_dynclk);
+               radeonfb_pm_init(rinfo, default_dynclk, ignore_devlist, force_sleep);
 
        pci_set_drvdata(pdev, info);
 
@@ -2477,6 +2479,12 @@ static int __init radeonfb_setup (char *options)
                        force_measure_pll = 1;
                } else if (!strncmp(this_opt, "ignore_edid", 11)) {
                        ignore_edid = 1;
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+               } else if (!strncmp(this_opt, "force_sleep", 11)) {
+                       force_sleep = 1;
+               } else if (!strncmp(this_opt, "ignore_devlist", 14)) {
+                       ignore_devlist = 1;
+#endif
                } else
                        mode_option = this_opt;
        }
@@ -2532,3 +2540,9 @@ module_param(panel_yres, int, 0);
 MODULE_PARM_DESC(panel_yres, "int: set panel yres");
 module_param(mode_option, charp, 0);
 MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+module_param(force_sleep, bool, 0);
+MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware");
+module_param(ignore_devlist, bool, 0);
+MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops");
+#endif
index c709176..f31e606 100644 (file)
 
 #include "ati_ids.h"
 
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
+/*
+ * Workarounds for bugs in PC laptops:
+ * - enable D2 sleep in some IBM Thinkpads
+ * - special case for Samsung P35
+ *
+ * Whitelist by subsystem vendor/device because
+ * its the subsystem vendor's fault!
+ */
+
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+struct radeon_device_id {
+        const char *ident;                     /* (arbitrary) Name */
+        const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
+        const unsigned short subsystem_device; /* Subsystem Device ID */
+       const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */
+       const reinit_function_ptr new_reinit_func;   /* changed reinit_func */
+};
+
+#define BUGFIX(model, sv, sd, pm, fn) { \
+       .ident = model, \
+       .subsystem_vendor = sv, \
+       .subsystem_device = sd, \
+       .pm_mode_modifier = pm, \
+       .new_reinit_func  = fn  \
+}
+
+static struct radeon_device_id radeon_workaround_list[] = {
+       BUGFIX("IBM Thinkpad R32",
+              PCI_VENDOR_ID_IBM, 0x1905,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad R40",
+              PCI_VENDOR_ID_IBM, 0x0526,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad R40",
+              PCI_VENDOR_ID_IBM, 0x0527,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad R50/R51/T40/T41",
+              PCI_VENDOR_ID_IBM, 0x0531,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad R51/T40/T41/T42",
+              PCI_VENDOR_ID_IBM, 0x0530,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad T30",
+              PCI_VENDOR_ID_IBM, 0x0517,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad T40p",
+              PCI_VENDOR_ID_IBM, 0x054d,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad T42",
+              PCI_VENDOR_ID_IBM, 0x0550,
+              radeon_pm_d2, NULL),
+       BUGFIX("IBM Thinkpad X31/X32",
+              PCI_VENDOR_ID_IBM, 0x052f,
+              radeon_pm_d2, NULL),
+       BUGFIX("Samsung P35",
+              PCI_VENDOR_ID_SAMSUNG, 0xc00c,
+              radeon_pm_off, radeon_reinitialize_M10),
+       { .ident = NULL }
+};
+
+static int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+       struct radeon_device_id *id;
+
+       for (id = radeon_workaround_list; id->ident != NULL; id++ )
+               if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) &&
+                   (id->subsystem_device == rinfo->pdev->subsystem_device )) {
+
+                       /* we found a device that requires workaround */
+                       printk(KERN_DEBUG "radeonfb: %s detected"
+                              ", enabling workaround\n", id->ident);
+
+                       rinfo->pm_mode |= id->pm_mode_modifier;
+
+                       if (id->new_reinit_func != NULL)
+                               rinfo->reinit_func = id->new_reinit_func;
+
+                       return 1;
+               }
+       return 0;  /* not found */
+}
+
+#else  /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+        return 0;
+}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+
+
+
 static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
 {
        u32 tmp;
@@ -852,18 +945,26 @@ static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
        /* because both INPLL and OUTPLL take the same lock, that's why. */
        tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND;
        OUTPLL( pllMCLK_MISC, tmp);
-       
-       /* AGP PLL control */
-       if (rinfo->family <= CHIP_FAMILY_RV280) {
-               OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
 
-               OUTREG(BUS_CNTL1,
-                      (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
-                      | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));   // 440BX
-       } else {
-               OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
-               OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+       /* BUS_CNTL1__MOBILE_PLATORM_SEL setting is northbridge chipset
+        * and radeon chip dependent. Thus we only enable it on Mac for
+        * now (until we get more info on how to compute the correct
+        * value for various X86 bridges).
+        */
+#ifdef CONFIG_PPC_PMAC
+       if (machine_is(powermac)) {
+               /* AGP PLL control */
+               if (rinfo->family <= CHIP_FAMILY_RV280) {
+                       OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
+                       OUTREG(BUS_CNTL1,
+                              (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
+                              | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));   // 440BX
+               } else {
+                       OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
+                       OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+               }
        }
+#endif
 
        OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL)
                                  & ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN));
@@ -2713,7 +2814,7 @@ static void radeonfb_early_resume(void *data)
 
 #endif /* CONFIG_PM */
 
-void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
+void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
 {
        /* Find PM registers in config space if any*/
        rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
@@ -2729,22 +2830,13 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
        }
 
 #if defined(CONFIG_PM)
+#if defined(CONFIG_PPC_PMAC)
        /* Check if we can power manage on suspend/resume. We can do
         * D2 on M6, M7 and M9, and we can resume from D3 cold a few other
         * "Mac" cards, but that's all. We need more infos about what the
         * BIOS does tho. Right now, all this PM stuff is pmac-only for that
         * reason. --BenH
         */
-       /* Special case for Samsung P35 laptops
-        */
-       if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) &&
-           (rinfo->pdev->device == PCI_CHIP_RV350_NP) &&
-           (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) &&
-           (rinfo->pdev->subsystem_device == 0xc00c)) {
-               rinfo->reinit_func = radeon_reinitialize_M10;
-               rinfo->pm_mode |= radeon_pm_off;
-       }
-#if defined(CONFIG_PPC_PMAC)
        if (machine_is(powermac) && rinfo->of_node) {
                if (rinfo->is_mobility && rinfo->pm_reg &&
                    rinfo->family <= CHIP_FAMILY_RV250)
@@ -2790,6 +2882,18 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
        }
 #endif /* defined(CONFIG_PPC_PMAC) */
 #endif /* defined(CONFIG_PM) */
+
+       if (ignore_devlist)
+               printk(KERN_DEBUG
+                      "radeonfb: skipping test for device workarounds\n");
+       else
+               radeon_apply_workarounds(rinfo);
+
+       if (force_sleep) {
+               printk(KERN_DEBUG
+                      "radeonfb: forcefully enabling D2 sleep mode\n");
+               rinfo->pm_mode |= radeon_pm_d2;
+       }
 }
 
 void radeonfb_pm_exit(struct radeonfb_info *rinfo)
index 38657b2..d5ff224 100644 (file)
@@ -273,6 +273,8 @@ enum radeon_pm_mode {
        radeon_pm_off   = 0x00000002,   /* Can resume from D3 cold */
 };
 
+typedef void (*reinit_function_ptr)(struct radeonfb_info *rinfo);
+
 struct radeonfb_info {
        struct fb_info          *info;
 
@@ -338,7 +340,7 @@ struct radeonfb_info {
        int                     dynclk;
        int                     no_schedule;
        enum radeon_pm_mode     pm_mode;
-       void                    (*reinit_func)(struct radeonfb_info *rinfo);
+       reinit_function_ptr     reinit_func;
 
        /* Lock on register access */
        spinlock_t              reg_lock;
@@ -600,7 +602,7 @@ extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8
 /* PM Functions */
 extern int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state);
 extern int radeonfb_pci_resume(struct pci_dev *pdev);
-extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk);
+extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep);
 extern void radeonfb_pm_exit(struct radeonfb_info *rinfo);
 
 /* Monitor probe functions */