PCI: Enable INTx if BIOS left them disabled

commit 1f42db786b14a31bf807fc41ee5583a00c08fcb1 upstream.

Some firmware leaves the Interrupt Disable bit set even if the device uses
INTx interrupts.  Clear Interrupt Disable so we get those interrupts.

Based on the report mentioned below, if the user selects the "EHCI only"
option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS
with the PCI_COMMAND_INTX_DISABLE bit set.

Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601
Reported-by: Chris Cheng <chris.cheng@atrustcorp.com>
Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a899d8b..0bb7bfd 100644 (file)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1119,6 +1119,8 @@ EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
 static int do_pci_enable_device(struct pci_dev *dev, int bars)
 {
        int err;
+       u16 cmd;
+       u8 pin;
 
        err = pci_set_power_state(dev, PCI_D0);
        if (err < 0 && err != -EIO)
@@ -1128,6 +1130,14 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
                return err;
        pci_fixup_device(pci_fixup_enable, dev);
 
+       pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+       if (pin) {
+               pci_read_config_word(dev, PCI_COMMAND, &cmd);
+               if (cmd & PCI_COMMAND_INTX_DISABLE)
+                       pci_write_config_word(dev, PCI_COMMAND,
+                                             cmd & ~PCI_COMMAND_INTX_DISABLE);
+       }
+
        return 0;
 }