powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform

New corenet platforms with chassis2 have separated DDR clock inputs. Use
CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of
detecting and displaying synchronous vs asynchronous mode.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index f493483..892bfa4 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,26 +60,32 @@ int checkcpu (void)
        uint major, minor;
        struct cpu_type *cpu;
        char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || \
-       (defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2))
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+       defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
-       u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
-               >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+       /*
+        * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+        * mode. Previous platform use ddr ratio to do the same. This
+        * information is only for display here.
+        */
 #ifdef CONFIG_FSL_CORENET
-       u32 ddr_sync ;
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
-       ddr_sync = 0;   /* only async mode is supported */
+       u32 ddr_sync = 0;       /* only async mode is supported */
 #else
-       ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+       u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
                >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else  /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+       u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+               >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
        u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
 #endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
        unsigned int i, core, nr_cores = cpu_numcores();
        u32 mask = cpu_mask();
 

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f07a28b..8a8f317 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -82,7 +82,11 @@ void get_sys_info (sys_info_t * sysInfo)
        uint mem_pll_rat;
 
        sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+       sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
        sysInfo->freqDDRBus = sysclk;
+#endif
 
        sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
        mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>