ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led node

backlight_led is the dimmable backlight for the rubber border on the case. It
is also used to highlight the power- and some other buttons.

MX6QDL_PAD_SD4_DAT1__PWM3_OUT is also assigned as output for pwm3. Since
we need pwm3 for the backlight, we're forced to disable user space hardware
revision detection. The bootloader will have to supply this information
(i.e. through device tree).

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 833340c..d542dda 100644 (file)
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -33,6 +33,15 @@
                enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
        };
 
+       backlight_led: backlight_led {
+               compatible = "pwm-backlight";
+               pwms = <&pwm3 0 5000000 0>;
+               brightness-levels = <0 16 64 255>;
+               num-interpolated-steps = <16>;
+               default-brightness-level = <48>;
+               power-supply = <&reg_3v3>;
+       };
+
        connector {
                compatible = "composite-video-connector";
                label = "Composite0";
@@ -392,8 +401,8 @@
 &gpio2 {
        gpio-line-names =
                "", "", "", "", "", "", "", "",
-               "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-                       "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+               "", "LED_PWM", "", "", "",
+                       "", "", "",
                "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
                "POWER_LED", "", "", "", "", "", "", "";
 };
@@ -778,17 +787,6 @@
                        /* ITU656_nPDN */
                        MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20             0x1b0b0
 
-                       /* HW revision detect */
-                       /* REV_ID0 */
-                       MX6QDL_PAD_SD4_DAT0__GPIO2_IO08                 0x1b0b0
-                       /* REV_ID1 is shared with PWM3 */
-                       /* REV_ID2 */
-                       MX6QDL_PAD_SD4_DAT2__GPIO2_IO10                 0x1b0b0
-                       /* REV_ID3 */
-                       MX6QDL_PAD_SD4_DAT3__GPIO2_IO11                 0x1b0b0
-                       /* REV_ID4 */
-                       MX6QDL_PAD_SD4_DAT4__GPIO2_IO12                 0x1b0b0
-
                        /* New in HW revision 1 */
                        /* ON1_FB */
                        MX6QDL_PAD_EIM_D20__GPIO3_IO20                  0x100b0

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a1fbbc9..2f6b263 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -28,6 +28,15 @@
                enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
        };
 
+       backlight_led: backlight_led {
+               compatible = "pwm-backlight";
+               pwms = <&pwm3 0 5000000 0>;
+               brightness-levels = <0 16 64 255>;
+               num-interpolated-steps = <16>;
+               default-brightness-level = <48>;
+               power-supply = <&reg_3v3>;
+       };
+
        connector {
                compatible = "composite-video-connector";
                label = "Composite0";
@@ -448,6 +457,12 @@
        status = "okay";
 };
 
+&pwm3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm3>;
+       status = "okay";
+};
+
 &ssi1 {
        #sound-dai-cells = <0>;
        fsl,mode = "ac97-slave";
@@ -669,18 +684,6 @@
                        /* ITU656_nPDN */
                        MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20             0x1b0b0
 
-                       /* HW revision detect */
-                       /* REV_ID0 */
-                       MX6QDL_PAD_SD4_DAT0__GPIO2_IO08                 0x1b0b0
-                       /* REV_ID1 */
-                       MX6QDL_PAD_SD4_DAT1__GPIO2_IO09                 0x1b0b0
-                       /* REV_ID2 */
-                       MX6QDL_PAD_SD4_DAT2__GPIO2_IO10                 0x1b0b0
-                       /* REV_ID3 */
-                       MX6QDL_PAD_SD4_DAT3__GPIO2_IO11                 0x1b0b0
-                       /* REV_ID4 */
-                       MX6QDL_PAD_SD4_DAT4__GPIO2_IO12                 0x1b0b0
-
                        /* New in HW revision 1 */
                        /* ON1_FB */
                        MX6QDL_PAD_EIM_D20__GPIO3_IO20                  0x100b0
@@ -738,6 +741,12 @@
                >;
        };
 
+       pinctrl_pwm3: pwm3grp {
+               fsl,pins = <
+                       MX6QDL_PAD_SD4_DAT1__PWM3_OUT                   0x1b0b0
+               >;
+       };
+
        /* YaCO AUX Uart */
        pinctrl_uart1: uart1grp {
                fsl,pins = <