EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
/**
+ *regulator_set_voltage_time_sel - get raise/fall time
+ * @regulator: regulator source
+ * @old_selector: selector for starting voltage
+ * @new_selector: selector for target voltage
+ *
+ * Provided with the starting and target voltage selectors, this function
+ * returns time in microseconds required to rise or fall to this new voltage
+ *
+ * Drivers providing uV_step in their regulator_desc and ramp_delay in
+ * regulation_constraints can use this as their set_voltage_time_sel()
+ * operation.
+ */
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ if (rdev->desc->ramp_delay && rdev->desc->uV_step)
+ return DIV_ROUND_UP(rdev->desc->uV_step *
+ abs(new_selector - old_selector),
+ rdev->desc->ramp_delay) * 1000;
+ return 0;
+}
+
+/**
* regulator_sync_voltage - re-apply last regulator output voltage
* @regulator: regulator source
*
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
+ * @ramp_delay: Time to settle down after voltage change (unit: mV/us)
* @volt_table: Voltage mapping table (if table based mapping)
*
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
unsigned int min_uV;
unsigned int uV_step;
+ unsigned int ramp_delay;
const unsigned int *volt_table;
int regulator_is_enabled_regmap(struct regulator_dev *rdev);
int regulator_enable_regmap(struct regulator_dev *rdev);
int regulator_disable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);