add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
.macro loadsp, rb
mov \rb, #0xff000000
orr \rb, \rb, #0x00ff0000
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
CONFIG_ARCH_EP80219=y
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
CONFIG_ARCH_IQ80331=y
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
+CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
# CONFIG_ARCH_IQ80331 is not set
CONFIG_MACH_IQ80332=y
# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
+CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
config ARCH_IQ80321
bool "Enable support for IQ80321"
- select ARCH_IOP321
+ select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ80321
evaluation kit for the IOP321 chipset.
config ARCH_IQ31244
bool "Enable support for IQ31244"
- select ARCH_IOP321
+ select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ31244
evaluation kit for the IOP321 chipset.
config ARCH_IQ80331
bool "Enable support for IQ80331"
- select ARCH_IOP331
+ select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80331
evaluation kit for the IOP331 chipset.
config MACH_IQ80332
bool "Enable support for IQ80332"
- select ARCH_IOP331
+ select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80332
evaluation kit for the IOP332 chipset.
config ARCH_EP80219
bool "Enable support for EP80219"
- select ARCH_IOP321
+ select ARCH_IOP32X
select ARCH_IQ31244
help
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
-config ARCH_IOP321
+config ARCH_IOP32X
bool
help
The IQ80321 uses the IOP321 variant.
The IQ31244 and EP80219 uses the IOP321 variant.
-config ARCH_IOP331
+config ARCH_IOP33X
bool
default ARCH_IQ80331
help
config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
- depends on (ARCH_IOP331)
+ depends on ARCH_IOP33X
help
Say Y here if you have StepD of the IOP80331 or IOP8033
based platforms.
obj-n :=
obj- :=
-obj-$(CONFIG_ARCH_IOP321) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
+obj-$(CONFIG_ARCH_IOP32X) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
-obj-$(CONFIG_ARCH_IOP331) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
+obj-$(CONFIG_ARCH_IOP33X) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
zreladdr-y := 0xa0008000
params_phys-y := 0xa0000100
initrd_phys-y := 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP331),y)
+ifeq ($(CONFIG_ARCH_IOP33X),y)
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
}
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
extern void iop331_init_irq(void);
extern struct sys_timer iop331_timer;
#endif
#ifdef CONFIG_ARCH_IOP310
#define XSCALE_PMU_IRQ IRQ_XS80200_PMU
#endif
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU
#endif
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
#endif
#ifdef CONFIG_ARCH_PXA
/*
* Every time unit enable is asserted, GPOD needs to be cleared
- * on IOP321 to avoid data corruption on the bus.
+ * on IOP32X to avoid data corruption on the bus.
*/
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
#define IOP321_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */
#define IOP321_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */
mov \rx, #0xfe000000 @ physical
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
orr \rx, \rx, #0x00800000 @ location of the UART
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x000fe000 @ Physical Base
*/
#include <asm/arch/irqs.h>
-#if defined(CONFIG_ARCH_IOP321)
+#if defined(CONFIG_ARCH_IOP32X)
.macro disable_fiq
.endm
1001:
.endm
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
.macro disable_fiq
.endm
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
#else
#define iop_is_321() 0
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
/*#define iop_is_331() ((processor_id & 0xffffffb0) == 0x69054090) */
#define iop_is_331() ((processor_id & 0xffffff30) == 0x69054010)
#else
#define IOP331_TU_TISR (volatile u32 *)IOP331_REG_ADDR(0x000007E8)
#define IOP331_TU_WDTCR (volatile u32 *)IOP331_REG_ADDR(0x000007EC)
-#if defined(CONFIG_ARCH_IOP331)
+#if defined(CONFIG_ARCH_IOP33X)
#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */
#endif
/*
* Chipset-specific bits
*/
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
#include "iop321-irqs.h"
#endif
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
#include "iop331-irqs.h"
#endif
/*
* Physical DRAM offset.
*/
-#ifndef CONFIG_ARCH_IOP331
+#ifndef CONFIG_ARCH_IOP33X
#define PHYS_OFFSET UL(0xa0000000)
#else
#define PHYS_OFFSET UL(0x00000000)
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
-#if defined(CONFIG_ARCH_IOP321)
+#if defined(CONFIG_ARCH_IOP32X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
static inline void arch_reset(char mode)
{
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
*IOP321_PCSR = 0x30;
#endif
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
*IOP331_PCSR = 0x30;
#endif
#include <linux/serial_reg.h>
#include <asm/hardware.h>
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
#define UTYPE unsigned char *
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
#define UTYPE u32 *
#else
#error "Missing IOP3xx arch type def"