[FIX] Change configuration for XUPV2P Microblaze board

diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile
index 9ab5633..99e7047 100644 (file)
--- a/board/xilinx/xupv2p/Makefile
+++ b/board/xilinx/xupv2p/Makefile
@@ -22,32 +22,17 @@
 #
 
 include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-endif
-
-INCS           := -I../common -I../xilinx_enet
-CFLAGS         += $(INCS)
-HOST_CFLAGS    += $(INCS)
 
 LIB    = $(obj)lib$(BOARD).a
 
-COBJS  = $(BOARD).o \
-         ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
-         ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
-         ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
-         ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
-         ../common/xbasic_types.o ../common/xdma_channel.o \
-         ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
-         ../common/xversion.o \
+COBJS  = $(BOARD).o
 
 SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS   := $(addprefix $(obj),$(COBJS))
 SOBJS  := $(addprefix $(obj),$(SOBJS))
 
-$(LIB):        $(OBJS) $(SOBJS)
-       $(AR) $(ARFLAGS) $@ $^
+$(LIB):        $(obj).depend $(OBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS)
 
 clean:
        rm -f $(SOBJS) $(OBJS)

diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk
index c07b0b3..eedfb24 100644 (file)
--- a/board/xilinx/xupv2p/config.mk
+++ b/board/xilinx/xupv2p/config.mk
@@ -25,8 +25,8 @@
 # Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
 #
 
-TEXT_BASE = 0x38000000
+TEXT_BASE = 0x30000000
 
+PLATFORM_CPPFLAGS += -mxl-pattern-compare
 PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
+PLATFORM_CPPFLAGS += -mcpu=v5.00.c

diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
index a96c693..0bb7a80 100644 (file)
--- a/board/xilinx/xupv2p/xparameters.h
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -28,17 +28,24 @@
 /* System Clock Frequency */
 #define XILINX_CLOCK_FREQ      100000000
 
+/* Microblaze is microblaze_0 */
+#define XILINX_USE_MSR_INSTR   1
+#define XILINX_PVR     0
+#define XILINX_FSL_NUMBER      0
+
 /* Interrupt controller is opb_intc_0 */
 #define XILINX_INTC_BASEADDR   0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS    11
+#define XILINX_INTC_NUM_INTR_INPUTS    7
 
 /* Timer pheriphery is opb_timer_1 */
 #define XILINX_TIMER_BASEADDR  0x41c00000
-#define XILINX_TIMER_IRQ       1
+#define XILINX_TIMER_IRQ       0
 
 /* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UART_BASEADDR   0x40600000
-#define XILINX_UART_BAUDRATE   115200
+#define XILINX_UARTLITE_BASEADDR       0x40600000
+#define XILINX_UARTLITE_BAUDRATE       115200
+
+/* IIC doesn't exist */
 
 /* GPIO is LEDs_4Bit*/
 #define XILINX_GPIO_BASEADDR   0x40000000
@@ -51,14 +58,10 @@
 
 /* Sysace Controller is SysACE_CompactFlash */
 #define XILINX_SYSACE_BASEADDR 0x41800000
-#define XILINX_SYSACE_HIGHADDR 0x4180ffff
 #define XILINX_SYSACE_MEM_WIDTH        16
 
 /* Ethernet controller is Ethernet_MAC */
-#define XPAR_XEMAC_NUM_INSTANCES       1
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID  0
-#define XPAR_OPB_ETHERNET_0_BASEADDR   0x40c00000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR   0x40c0ffff
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT        1
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST    1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST  1
+#define XILINX_EMAC_BASEADDR   0x40c00000
+#define XILINX_EMAC_DMA_PRESENT        3
+#define XILINX_EMAC_HALF_DUPLEX_EXIST  1
+#define XILINX_EMAC_MII_EXIST  1

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b4c720d..25fa495 100644 (file)
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,13 +31,33 @@
 #define        CONFIG_XUPV2P           1
 
 /* uart */
-#define        CONFIG_SERIAL_BASE      XILINX_UART_BASEADDR
-#define        CONFIG_BAUDRATE         XILINX_UART_BAUDRATE
+#ifdef XILINX_UARTLITE_BASEADDR
+#define        CONFIG_SERIAL_BASE      XILINX_UARTLITE_BASEADDR
+#define        CONFIG_BAUDRATE         XILINX_UARTLITE_BAUDRATE
 #define        CFG_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE   4
+#define CONFIG_CONS_INDEX      1
+#define CFG_NS16550_COM1       XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK                XILINX_UART16550_CLOCK_HZ
+
+#define        CONFIG_BAUDRATE         115200
+#define        CFG_BAUDRATE_TABLE      { 9600, 115200 }
+#endif
+#endif
 
 /* ethernet */
-#define CONFIG_EMAC    1
-#define XPAR_EMAC_0_DEVICE_ID  XPAR_XEMAC_NUM_INSTANCES
+#ifdef XILINX_EMAC_BASEADDR
+#define XILINX_EMAC    1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define XILINX_EMACLITE        1
+#endif
+#endif
+#undef ET_DEBUG
 
 /*
  * setting reset address
@@ -48,11 +68,13 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define        CFG_RESET_ADDRESS       0x36000000
+/* #define     CFG_RESET_ADDRESS       0x36000000 */
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define        CFG_GPIO_0              1
 #define        CFG_GPIO_0_ADDR         XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
 #define        CFG_INTC_0              1
@@ -118,6 +140,25 @@
 #define        CFG_ENV_IS_NOWHERE      1
 #define        CFG_ENV_SIZE            0x1000
 #define        CFG_ENV_ADDR            (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+#ifndef XILINX_SYSACE_BASEADDR
+#define        CONFIG_COMMANDS (CONFIG__CMD_DFL |\
+                       CFG_CMD_MEMORY |\
+                       CFG_CMD_IRQ |\
+                       CFG_CMD_BDI |\
+                       CFG_CMD_NET |\
+                       CFG_CMD_IMI |\
+                       CFG_CMD_ECHO |\
+                       CFG_CMD_CACHE |\
+                       CFG_CMD_RUN |\
+                       CFG_CMD_AUTOSCRIPT |\
+                       CFG_CMD_ASKENV |\
+                       CFG_CMD_LOADS |\
+                       CFG_CMD_LOADB |\
+                       CFG_CMD_MISC |\
+                       CFG_CMD_MFSL |\
+                       CFG_CMD_PING \
+                       )
+#else
 #define        CONFIG_COMMANDS (CONFIG__CMD_DFL |\
                        CFG_CMD_MEMORY |\
                        CFG_CMD_IRQ |\
@@ -134,8 +175,10 @@
                        CFG_CMD_MISC |\
                        CFG_CMD_FAT |\
                        CFG_CMD_EXT2 |\
+                       CFG_CMD_MFSL |\
                        CFG_CMD_PING \
                        )
+#endif
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -150,7 +193,7 @@
 
 #define        CONFIG_BOOTDELAY        30
 #define        CONFIG_BOOTARGS         "root=romfs"
-#define        CONFIG_HOSTNAME         "ml401"
+#define        CONFIG_HOSTNAME         "xupv2p"
 #define        CONFIG_BOOTCOMMAND      "base 0;tftp 11000000 image.img;bootm"
 #define        CONFIG_IPADDR           192.168.0.3
 #define        CONFIG_SERVERIP         192.168.0.5
@@ -166,11 +209,13 @@
        "echo"
 
 /* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
 #define        CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define        SYSTEMACE_CONFIG_FPGA
 #define        CFG_SYSTEMACE_BASE      XILINX_SYSACE_BASEADDR
 #define        CFG_SYSTEMACE_WIDTH     XILINX_SYSACE_MEM_WIDTH
 #define        CONFIG_DOS_PARTITION
+#endif
 
 #endif /* __CONFIG_H */